Liczymy pasujące modele…
If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…
I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria: Gridfinity compatible and stackable Compact with maximum storage capacity Designed for Ankermake nozzles This bin will store 16 Ankermake nozzles…
A 6x1 gridfinity bin for storing digital calipers. Inspired by other designs but reimplemented from scratch to have more accurate measurements (for my model at least). This bin should hold the calipers flatter, and it lowers the cavities…
Also check out the paint brush dryer accessory! My miniature painting brushes were taking up more desk space than I would have liked; my circular brush stand (pictured for reference) was an inefficient use of space, was half empty, and…
Update 2024-06-09: a new version is available! The first big model I printed when I started out was an under-desk bin for the ALEX desk I use with my printer. I wanted a convenient way to get rid of the little debris produced by a 3D…
I found a few bins for storing 608 bearings, the best being this one . But the stackable model was 6U high, and had a full 9mm of floor below the grooves, which is a waste of space and plastic. I reimplemented the bin using Akio's…
This is a Remix of the AM M5 Frictionless Filament Holer from runswithspoons. Removed the Screwhole and added Sidewalls to the Upright Holder. Now the filament holder can simply be placed on the vertical piece and does not require any…
Updated 2023-09-29: the original design turned out to be a bit too fragile - the vertical bars can sometimes snap off. The new design makes them 50% thicker, and adds an angled bottom to the slots. A friend of mine likes to wash and reuse…
This coin organizer is designed to fit inside a nightstand drawer. It combines slots for Canadian 5¢/10¢/25¢/$1/$2 coins and an area for keys and other small objects. Update 2024-02-18: Added a taller version (+12mm) by special request.
Are you printing this enclosure designed by @TylerSpurgeon for your 3D printer? Do you want some nice acrylic panels on it, but you live in a condo and don't have access to a workshop and don't want to pay extra to have large expensive…
Just a quick remix to adjust the dimensions of the original model so a full card deck will fit inside. Update 2025-04-15: since a lot of people seem to dislike the extra space inside the box, I uploaded a short version with 2mm less space…
This is a small remix of the model by Lorro. Widened the slot from 16.0mm to 16.4mm (so the calipers fit smoothly) Widened the front cavity (it was still interfering with the screw) Made the magnet holes shallower (from 2.4mm to 2.0mm) to…
I recently bumped into my old desk bin and snapped one of the arms off… So I figured it was time to revisit the design. The original model was an attempt to faithfully reproduce the design it was based on, but this time around I decided…
This is a small accessory to dry your hobby paint brushes head down. It's designed to fit with my previous design “The Beast” and takes up very little additional space. It should hold most medium-sized brushes (the hole scales from 5mm to…
Simple little standees for boardgames and prototyping. Three different versions are provided, with varying gaps: 0.2mm, for a thickness of one playing card or more 0.4mm, for a thickness of 2 playing cards or more 0.3mm, a happy medium —…
A simple set of 19 labelled strips of different thicknesses, from 0.2mm to 3.0mm. There are also cover plates for 5 common filament materials. Comes with a little press-fit spindle to keep them all together. Updated 2023/04/20: By…
This is a slight remix of iksnel's organizer for the board game Tiny Towns. I recreated all the parts and made some small modifications as described below, but the design itself is unchanged. This is a great storage solution that allows…
This is a quick and dirty remix that adds small pegs at the end of each of the five support legs. The pit I'm working on is on the small side, so I printed the model at 75%; as a result the legs are barely wider than the glass and the…
These little doodads are designed for 2mm thick corrugated cardboard boxes. They will simply keep the flaps open vertically, for example to make a quick and dirty spray booth. Every other model I found was designed to keep the flaps…
This is a stand with four angled slots for remote controls. The slots are 13.5/28/37/37mm deep, and about 46/48/51/56mm wide (rounded down); don't forget to measure the width and thickness of your remotes to make sure they will fit. The…
A simple quick-printing stand for curved lithophanes. The slot has a small 10° backwards angle and a tolerance of 0.2mm for a snug fit. The stand is about 40mm deep and 120mm wide. The stand should fit lithophanes from…
A simple quick-printing stand for curved lithophanes. The slot has a small 10° backwards angle and a tolerance of 0.2mm for a snug fit. The stand is about 45mm deep and 160mm wide. The stand should fit lithophanes from…
If you use Fusion360, then you probably know that its text tool is a bit flaky. I have a lot of free fonts from the web that Fusion360 refuses to extrude or emboss, because “reasons.” This is a simple tool to work around this, by…
There are a lot of models out there to store packs of cards; but if you want something compact to store e.g. a small 18-card print & play game, then it's slim pickings. This model is a very simple, fast, and inexpensive solution (under…
This is an OpenSCAD program to generate miniature gaming bases of various sizes. It supports rounded, rectangular and hexagonal bases, and optional slots, magnet holes and lips. Almost everything can be configured and tweaked, but as…
These LED light strip holders are designed to fit inside this enclosure designed by @TylerSpurgeon . They attach magnetically to the frame using mounting pieces that are fixed in place using the screws that you use to assemble the frame.…
This super-simple filament cleaner is inspired by a very old model found on Thingiverse . Extremely lightweight, no moving parts, no magnets, simple to print, no supports needed. The casing is angled upwards 30° so it won't put additional…
A set of miniature gardening tools for small houseplants. Although you can find small gardening tools for sale online, I wanted something even smaller. These tools can be printed without supports using normal settings.
This is a 2x2x6U gridfinity-compatible storage bin designed for a Slice Engineering nozzle torque wrench. The bin lets you store the wrench (and the 7mm adapter) horizontally, and is stackable.
This is a simple way to install a temperature/humidity sensor on top of your AnkerMake M5; I got tired of mine just sitting in front of the printer. My design was inspired by this one but unfortunately it's specific to the ThermoPro TP50,…
This is a very simple and easy-to-print stand for eyeglasses. No fancy decorations or fake noses, just a simple, practical, and attractive design. The central notch is slightly off-center, which should help accommodate more different…
I took my favourite of mishkin2 's cat shapes, added two magnet holes on the back, and made a little cutout for the eyes so you can mix and match colours to your liking. Have fun! Should be printed at 0.2mm layer height. The cutout for…
Like many others before me, I discovered that my IKEA Alex desk drawers are almost perfectly 7 gridfinity units wide, but in length they're not such a perfect fit: 12 units deep, but with 16mm extra space (in my case – apparently it…
This is a compact stand and drip tray for a Sodastream plastic bottle and cap. I had been using another design for over a year, but I wanted a stand that didn't have any holes on the bottom so I wouldn't need to keep a piece of paper…
This is a very compact box for storing up to 12 LR44 cell batteries. Lots of designs are available for battery storage, with things like ruggedized cases, hinged boxes with secure latches for transport, room for 100 batteries of 12…
These sliding arms allow you to transform a ruler into a large vernier caliper. Useful to measure very large objects that are too big for a normal caliper, as long as you don't need great precision. The arms are 120mm long (4 ¾") which…
An undecorated bookmark with a thicker tab at the top.
This saucer is designed to go under rectangular succulent planters. The saucer is 154x94mm (6"x3.7") and has small raised (3mm) supports on the inside; they are needed in case you don't want to put gravel in the saucer, since the planters…
This is a small hanger for backpacks or other bags. The rod in my closet is the thin 8mm type so I didn't want a large hanger designed for 30/35mm rods, which seems to be the majority of models. This hanger is designed with a 21mm inner…
A small (<1g) and quick-to-print model to test overhangs. Includes walls at 30°, 45°, and 60° as both overhang and slope.
There are a few inserts out there for this game, but none of them checked all the boxes for me (bet you never heard that one before). Plus, this is my first real design, so I wanted to have fun. The design was very much inspired by the…
A bookmark with a spiral pattern and a thicker tab at the top.
This is a simple tray to keep the tiles and animals currently in the “market” properly aligned. The wells are just deep enough to keep things in place, with no need for raised edges. And each well has an empty section at the top, so it's…
These hooks are designed to clip onto the wooden rods of common plant stands that can be found online (the rods are 15.5mm wide). They clip on securely but also slide easily to adjust their position. They also have a downward hanging hook…
This is a little tool to help with aligning your build plate. There are simpler guides that require sticking to the underside of the plate, and others that can be attached to the bed supports but are then subject to high temperatures that…
Do you own utensils? Do you store them in a tray? Do the stacks keep falling over, triggering your OCD side? Then the Sta-Stak might be just what the doctor ordered. Just look at these carefully crafted before-and-after pictures! One…
This is a very compact box for storing up to 8 CR2032 (or 10 CR2025) cell batteries. Lots of designs are available for battery storage, with things like ruggedized cases, hinged boxes with secure latches for transport, room for 100…
I wanted a diffuser for my small pocket flashlight. This flashlight model seems to be common online, but I couldn't find a lot that was designed for it. This diffuser has a 26mm inner diameter, so if your flashlight has a straight end of…
These hooks are designed to clip onto the wooden rods of common plant stands that can be found online (the rods are 15.5mm wide). Since most of my plants can't tolerate direct sunlight, I decided to hang a sheer curtain around the back,…
A tabbed bookmark with hollowed-out amphora shapes and a thicker tab at the top.
This is a grow light support designed to clip onto the wooden rods of common plant stands that can be found online (the rods are 15.5mm wide). I recently purchased a “three-leaf” grow light bulb that came with a loose socket and wire, but…
This is a simple rack to hold up to 5 pill bottles. One version is designed for 28mm bottles, and the other for 35mm. Note that the spacing between the bottles might be too tight for bottles with very wide caps. Unfortunately, "standard"…
I wanted to use the Guillotine insert from the Photo Caddy Board Game Insert Collection but the dimensions were wrong. I have the square box edition (with a square manual) and even when folded in half, the manual is larger than the one…
We organize summer barbecues at the office, and always separate meat and vegetarian dishes to accommodate everyone. I made these simple standees to help with this.
This hook is designed to clip onto the wooden rods of common plant stands that can be found online (the rods are 15.5mm wide). It clips on securely but also slides easily to adjust its position. On the front side, a peg allows hanging a…
This chopstick holder spells “rice” or “meal” in Japanese. Updated: changed the kanji (which used to say “starving” instead of “hungry”) to something better. Thanks to @Nakapan for guidance. Print at 0.1mm layer height for smoother curves.
To wszystkie aktualnie dostępne wyniki.
