Liczymy pasujące modele…
Made out of two parts. I painted mine and added some leg pads on the bottom. Mine is printed out of PLA and feels sturdy, but you could print this out of PETG if more strength is desired. Printing suggestions: Infill: 15% or more (more…
I found the knobs on my wardrobe and drawers a little uncomfortable - if your hands are wet, you would struggle to keep hold on them, they would also be difficult for people with disabilities such as arthritis. So I designed some basic,…
Takes less than 20 minutes to print! Make sure to insert into the right hexagons! Recommended settings: Material: PLA Supports: None Nozzle: 0.4 mm or less Layer height: 0.15 mm or less Infill: 50-100% Features: Snaps in easily Does not…
Please take time to set up optimal slicing settings in order to get a fast and beautiful print! Or better yet, feel free to use my .3mf PrusaSlicer preset for your printer. -------------------------------- Stackable, modular containers…
The LCD knob works both on the MINI and MK3 printers! The snout and the body are separate - Meaning you can print this duck in two colors without a Multi-Material printer. The two parts snap together easily. Make sure to clean your bed…
A simple, good looking hair comb for your haircare needs. Recommended settings: Layer height: 0.1-0.15 mm Nozzle size: 0.4 mm Perimeters: 2 “Avoid crossing perimeters” setting: ON Infill: 100% Filaments used in showcase (All PLA): Ivory -…
Gameboy cartridge holder for both single colour and multicolour printers. With single colour printing, just print each letter separately and glue it on! Holds cartridges snuggly. You can also print a solid single colour version, where no…
Perfect for dioramas! On my Prusa MINI, I am able to fit 6 of these glasses on the bed using sequential printing. The “drink” part is essential for the construction of the figure! An empty glass will not hold together! Technical…
If you have a Prusa 3D printer, you probably already have enough square M4 nut s. You need 4 in total. However if you don't have them on hand, the square nuts used are ~6mm width, ~2mm thick. Push them to the slots and they will create a…
This is a flexible helmet decoration, that you can attach using velcro stickers (you can buy them at craft or sewing stores, aliexpress, ebay, etc. Print as one piece, no supports, and enjoy!
Slightly shorter than the original to fit on my Prusa MK4 at 210mm height. Print standing vertically, consider adding a brim. I recommend using PETG or another material that is more flexible (fatigue-friendly), as the connector button…
Foolproof assembly. Prints out of 3 identical pieces. I have made them in 15 different shapes and sizes. Scale up and down if needed. The pieces snap together, and the final assembly is surprisingly strong. Printing…
I love this planter, however the 3D mesh had some flaws. Being a professional 3D artist, I fixed it, creating a full-quad mesh that can be used at any size, and am sharing it with all of you.
Print without any supports, vertically. Enjoy!
To wszystkie aktualnie dostępne wyniki.
