Hexagonal Cabinet Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish and minimalist knob for drawers, wardrobes and cabinets.
- Ocena
- 5 / 5
- Polubienia
- 160
- Pobrania
- 492
- Wydruki
- 12
- Wyświetlenia
- 1657
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the knobs on my wardrobe and drawers a little uncomfortable - if your hands are wet, you would struggle to keep hold on them, they would also be difficult for people with disabilities such as arthritis. So I designed some basic, but good looking knobs to solve this small issue. I also just love hexagons.
These work straight out of the printer with some IKEA furniture - Billy cabinets, Kallax drawers, Eket glass door (IKEA screws 114667, 100412). I'd assume they work with many standard knob attachments.
Technical Information
Recommended printing settings:
- Layer height: 0.15 mm or lower
- Nozzle size: 0.4 or lower
- Material: PLA
- Supports: None
- Brim: Yes
Mounting the knobs:
- The hole's diameter is exactly 3.5 mm. An M3 (#4 in the US) woodscrew is best. I used the pre-existing IKEA wood screws from my Billy cabinet. If you use a wider or narrower screw, scale the knob in XY directions.
- maximum threading depth - 19 mm (¾ "). If you have a longer threaded screw, scale the knob in the Z axis.
Beware that the inside of the knob will be "damaged" after threading - just like regular wood knobs. They can be mounted and unmounted many times before turning loose.