Hexagonal Cabinet Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stylish and minimalist knob for drawers, wardrobes and cabinets.
- Rating
- 5 / 5
- Likes
- 160
- Downloads
- 492
- Makes
- 12
- Views
- 1,657
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I found the knobs on my wardrobe and drawers a little uncomfortable - if your hands are wet, you would struggle to keep hold on them, they would also be difficult for people with disabilities such as arthritis. So I designed some basic, but good looking knobs to solve this small issue. I also just love hexagons.
These work straight out of the printer with some IKEA furniture - Billy cabinets, Kallax drawers, Eket glass door (IKEA screws 114667, 100412). I'd assume they work with many standard knob attachments.
Technical Information
Recommended printing settings:
- Layer height: 0.15 mm or lower
- Nozzle size: 0.4 or lower
- Material: PLA
- Supports: None
- Brim: Yes
Mounting the knobs:
- The hole's diameter is exactly 3.5 mm. An M3 (#4 in the US) woodscrew is best. I used the pre-existing IKEA wood screws from my Billy cabinet. If you use a wider or narrower screw, scale the knob in XY directions.
- maximum threading depth - 19 mm (¾ "). If you have a longer threaded screw, scale the knob in the Z axis.
Beware that the inside of the knob will be "damaged" after threading - just like regular wood knobs. They can be mounted and unmounted many times before turning loose.