P
Printablesthejosh108
Low stress trainer/Plant bender °90
Copied roughly from the commercially available one, scaled about right. Not worth my time but now you won't have to.
- Pobrania
- 835
- Polubienia
- 90
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printablesthejosh108
Makita router circle jig shorter
Shortened the design by cutting a chunk out of the middle of the track. Fits on more printers and prints faster this way
- Pobrania
- 799
- Polubienia
- 159
- Ocena
- 4,82
P
Printablesthejosh108
Minimalist silicone tube holder fast
Minimalist silicone tube holder. Print with no top or bottom layers, 1 perimeter, PLA is fine. Designed to print with minimal material. My first attempt was a solid plate with holes, next I tried just the rings, and finally settled on…
- Pobrania
- 288
- Polubienia
- 44
- Ocena
- 5
P
Printablesthejosh108
New xt60 connector lock/clip
This is a clip to hold the already very secure xt60 connector together. This clip is designed for the new style plug that is symmetrical on the outside and includes a terminal cap at the ends. Normally this is unnecessary but I use xt60s…
- Pobrania
- 286
- Polubienia
- 16
- Ocena
- 5
P
Printablesthejosh108
Ortlieb pannier latching hook
Slightly redesigned compatible pannier hook for ortlieb bike bags. Fits smaller bike rack rail without adapter.
- Pobrania
- 248
- Polubienia
- 49
- Ocena
- 5
P
Printablesthejosh108
22mm Pole Grow Tent Utility shelf 100mm
Designed my own shelf for 22 mm poles. Rounded corners for better appearance and easier printing. Opening to one side for easier attachment and reinforcement webbing for stability. space for a zip tie for security.
- Pobrania
- 234
- Polubienia
- 39
- Ocena
- 0
P
Printablesthejosh108
Scanned Moai (Easter Island) Concrete mold
I downloaded a 3d scan of a Moai and I made a block, then used the Moai to form a Moai shaped negative. Print with bottom down. use 2 perimeters so its sealed up. 2% infill and 2 layers top and bottom so the print can be ripped and cut…
- Pobrania
- 213
- Polubienia
- 45
- Ocena
- 5
P
Printablesthejosh108
Very Loud Emergency Whistle 2 and 4 tone
put together on a Sunday night with Microsoft 3d builder (highly recommended, free on windows, I use it constantly on old hardware) I first rescaled the original a few sizes because it prints fast. Then I tried blowing 2 sizes at once, it…
- Pobrania
- 171
- Polubienia
- 18
- Ocena
- 0
P
Printablesthejosh108
Magic strap buckle (magnetic) round magnets
Designed to fit 6mm neodymium magnets tightly, press them in with a vice. If you print at 167% scale then it also fits 10mm magnets and it's about belt buckle size.
- Pobrania
- 164
- Polubienia
- 28
- Ocena
- 0
P
Printablesthejosh108
Bicycle handlebar switch mount
This is a housing for a toggle switch that can be zip-tied to a 1 inch (25.4mm) bike handlebar. My switch is a replacement for RC transmitter switch, hooked up to a speed limit on my ebike. The file enclosed the inside to make it much…
- Pobrania
- 85
- Polubienia
- 14
- Ocena
- 0
P
Printablesthejosh108
Geometric panel Stamps For making balls and footbags
Using just a 3d printer and basic sewing skill you can make accurate ball panels. Its as easy as stamping with a standard stamp pad, white if the fabric is dark, then just sw on the dotted line. use saddle stich for best results. Print…
- Pobrania
- 70
- Polubienia
- 43
- Ocena
- 0
P
Printablesthejosh108
Squareness fit test
2 basic L's, one with pegs and one with holes. 0.2mm tolerance. If your machine is out of square they won't fit together. I have them arranged 90° opposed to each other so they'll be off in opposite directions to see the error clearly. I…
- Pobrania
- 68
- Polubienia
- 6
- Ocena
- 0
P
Printablesthejosh108
RTL SDR stock antenna rebuild
I broke the stock antenna for my SDR. Just the plain bunny ears that came with the dongle. This antenna actually worked pretty well so it was unfortunate. I might have left it outside in a storm. This new version of the plastic body is…
- Pobrania
- 68
- Polubienia
- 8
- Ocena
- 0
P
Printablesthejosh108
1/4 -20 -star_knob-big
Customized version of https://www.thingiverse.com/thing:1562501 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1562501 Print Settings Printer: Kossel Delta Rafts: No Supports: No Resolution: 0.3mm…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 5
P
Printablesthejosh108
hovercraft parts 90° brushless motor mount stalk, Duct, motor boom mount for RC airplane/hovercraft
Motor mounts used for DIY RC hovercraft. Dual motor is with differential thrust 1804 size with 5030 props.
- Pobrania
- 50
- Polubienia
- 13
- Ocena
- 0
P
Printablesthejosh108
Real pumpkin scan Jack-O-Lanturn
Used polycam to scan a pumpkin that squirrels had dug a hole into. They didn't get the seeds but the pumpkin started to rot. I kept the squirrel damage in the model. Printed mine in generic orange PLA with organic supports working…
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
Printablesthejosh108
UMX_Timber_prop_adapter
Modified it to take a cheap drone propeller, bigger axle Category: R/C Vehicles
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
Printablesthejosh108
Spool for matter hackers refill (master spool)
Simplistic spool that takes advantage of the cardboard core on matter hackers refill spools. printed mine in PLA and PETG 200mm Diameter outside 80mm core hub Made for 5/16" standard hex bolt, right in the middle keeping the core of the…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
Printablesthejosh108
Simple Beagle Camera 90° wall/door mount
Designed in less then 10 minutes. I was originally going to mount below the angled trim but the camera is adjustable so I gained a little height. This was intended for the door of my OSB box enclosure but I can see it being adapted…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
Printablesthejosh108
3D scan of my cat Luna
The other day it was finally hot enough that I could scan my cat without her moving. I only got 115 pictures using polycam but that was enough to make this who a little model of my cat relaxing. She was unimpressed. Please enjoy and share…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesthejosh108
0.5-1/2 inch nut knobs
I installed the nuts by heating them up with a torch and melting them in securely. If you don't want to do that you can scale the design up by a little for an interference fit and use CA glue. update-2-2026: new, more roundered and…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
Printablesthejosh108
Makers Playground Logo stencil
0.6mm printable stencil Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament Amazon crap Grey Notes: Any material does the trick. Category: Art
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printablesthejosh108
4 Point Tiny Whoop camera mount - VM275t
This is a modified 4 point camera mount system made for the VM275t FPV micro camera and the cockroach frame, or any other "tiny Whoop" size quad. I wanted a 4 point mount dew to the FC always getting un-clipped, ruining the flight…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
Printablesthejosh108
Plug for Shopvac filters
A plug for the bottom attachment hole on a shopvac style filter so the filter can be used for other things like homemade dust collector or air cleaner. sortof needless to post as its a 2 minute make in 123d but, now its downloadable.…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 5
P
Printablesthejosh108
Ball making stamps.
I modeled these stamps in SketchUp to fit on my arbor press so I could stamp various materials with a few geometric shapes and sizes so I could make different types of walls including hacky sacks and small soccer balls. They can be…
- Pobrania
- 18
- Polubienia
- 7
- Ocena
- 0
P
Printablesthejosh108
Self adjusting sphere making tool
thought of this tools after watching others on youtube make spheres using a 3 head machine. I thought I could print a sanding tools that could form a perfect sphere from wood using only a drill. the heads mount with m4 bolts, no incerts…
- Pobrania
- 17
- Polubienia
- 10
- Ocena
- 0
P
Printablesthejosh108
AEG belt sander dust hose adapter 2.5"
made an adapter for older aeg beltsanders with mounting tabs on the dust port.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablesthejosh108
Bicycle derailleur pulley wheel bearing press jig 11t 13t 15t
easily press bearings out of aluminum and plastic derailleur pulley/jockey wheels. can be used in a vice, drill press, arbor press, clamp, or you could just smack it with something. made for pressing 9 mm ID x 17 mm OD bearings 11t 13t 15t
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
Printablesthejosh108
Spectrum DSMX hack module cover- FrSky Taranis X9D+
I needed this door for my dsmx hack that i did with my tarannis using is board; https://www.radiocontronics.com/Taranis-Spektrum-Hack-DSMX-Module This is the module cover made by Painless360 only I have removed his logo and replaced it…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printablesthejosh108
3D Scans of things
Polycam scans of: toy elephant toy monster toy army man my impact driver a pumpkin I grew that a squirrel chewed on
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesthejosh108
Geometric solid connector hubs for bicycle cable
These hubs let you make a huge variety of shapes in whatever size. There are hubs for bicycle brake cable and shift cable. I measure and cut lengths of cable and ca glue them into the holes once I'm sure they are in all the way. Thin ca…
- Pobrania
- 11
- Polubienia
- 13
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.