Liczymy pasujące modele…
This is a measuring tool for easily determining the Z-axis offset. I wanted to level the print bed of my Core ONE and print the following model: However, it is not easy to measure the distance with a caliper, so I printed this model to…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Name Tag for Kids or Schoolbag, I‘ve created them for the kids backpacks. I‘ve used PETG for better durability. Dimensions: 102x24x8mm - Hole ~ 18mm Version 1.1: Added more names and the plates have now chamfered edges. 1.2: Added more…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Decorative Easter egg with a cracked shell look. The egg is designed as a hollow shell and has an cracked opening on the front. Ideal as an Easter decoration, for filling with small figures, sweets, or LED lights. No support required. The…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
This is a remix of the Universal Ball joint. My adapter for my NT-USB broke, so I needed a new Adapter to mount the mic on the original tripod. I printed this model to replace the original ring adapter: And then I modified the Universal…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stand for the peppa pig school blackboard. The original one broke in half, so I designed a new one. I‘ve printed it horizontal, but maybe it will work also if its upright. The blackboard itself is not included, but I can add it…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This tool helps you open your drain grate, whether it’s in the shower, outside in the courtyard or for point-type drains. I’ve created two different versions: a single-sided one for smaller holes in channel-shaped shower drains and a…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description An asymmetrical chain guard ring for a Shimano front chainring with 42 teeth. The chainring has 5 holes, but these are arranged asymmetrically. All hole spacings are 86 mm, except for one which is 75 mm. The bolt circle…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a dispenser for hand-washing paste. Since I always had to scoop my hand-washing paste out of a 10-liter bucket, I designed this dispenser. Its function is modeled after commercially available dispensers. The design consists of the…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed an decent stand for my autograph cards, so I designed one. After I had designed and printed it, I realized that it could, of course, also be used for postcards or photos. There are two versions, one decent version, with only ~1mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple model, since I had a problem with pigeons trying to build a nest on my garden floodlight. I’ve uploaded models for 3mm and 4mm widths; they can also be scaled in the slicer. The Fusion file is uploaded as well. UPDATE: V2: The…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Lock/Handle from my old Curver Click'n Fit box broke and so I designed a new lock based on the original. Print Settings Material: PETG at least Infill: 15% Perimeter: 4 for best stability Supports: On Everywhere, Snug fit ⚠ The bgcode…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Unfortunately, we’ve lost the locking pin for our child’s toilet seat. Of course, it fell into the toilet and someone flushed it away 🤭 Without the pin the set is very uncomfortable for the child to use, because the whole seat slides from…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since all the dividers on my garden chairs were broken, it was no longer possible to stack the chairs properly causing them to rub on each other. This caused the powder coating to peel off. However this part has a slightly larger opening…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perhaps you've tried opening the bin compartment with your hands when you've had both hands full of waste? With this simple print, you can open the compartment with your foot. You can either stick the opener to the underside or use the…
Wydruk około 0,36 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A flag for Peppa Pig's Treehouse and Georges' Fort. The skull and the crossbones are applied with an SVG modifier. Glue the both pieces together when printed. I included a project for INDX/MMU prints. Additionally, there is an empty flag…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
I wanted to print KingNothings INDX founders plaque magnet holder, but I only hat 5x2mm magnets here. So I remixed his model to make 5x2mm magnets fit. Thanks to KingNothing for his work!
I used Valterra SB120 pull-type sliders for my homemade dust extraction system in my wood workshop to easily close the openings I didn't need. I used 50 mm HT pipes for the extraction system. The SB120 pull-type sliders fit the pipe…
The plastic headrest padding on the Jabra Engage 75 cracks or breaks over time, making an otherwise perfectly functional headset uncomfortable to wear. This is a replacement part that snap-fits perfectly onto the headband. It will also…
The 16mm clip from Make by L is brilliant because the plants can no longer escape through the opening at the front, as it overlaps. I wanted a clip that matched this design but would fit other rod diameters, such as 11mm. I've adopted the…
We have been using these orange mixing bowls in the kitchen for quite some time, but some of the feet were missing and the bowl was uneven. Unfortunately, I don't know what brand the bowls are because there is nothing printed or embossed…
Since I couldn't get the drain valve back in after taking apart my TECE toilet tank because the gasket had stretched slightly, I had to print a new gasket so I could reassemble the tank and make it tight again. I printed the gasket using…
To wszystkie aktualnie dostępne wyniki.
![Name tag / plate [ Hannes | Nora ... and others ] for Backpack](https://media.printables.com/media/prints/3ab171f3-44b8-4b4e-ae40-d70b391469ad/images/10453577_671b06b4-46e1-4fea-8b5d-31d28d7e5dc6_ad6c8d86-4f9e-4140-a0cb-c19ea660166b/img_2058.jpeg)
