Liczymy pasujące modele…
3D Model of a Etalon micrometer, used to design a box to store it. Want to support me? => Have a look at my USB power supply mod (5V/1A) for Prusa MK4(S)/3.5(S)/MK3(S)(+) and Prusa XL, perfect for powering Buddy3D cameras or similar:…
Hello, I've modified the file from @loicloic to use it with 2.5mm panels. Works with the Formbot V0 kit. STL and 3MF are provided. Want to support me? => Have a look at my USB power supply mod (5V/1A) for Prusa MK4(S)/3.5(S)/MK3(S)(+) and…
Here's my rebuild of the X and Y axis of the Velleman K8200. It features GT2 belts, tangential clamping for the use of Igus linear bearings (Also works for normal ball bearings). It is way more sturdy than the original design and it…
You'll need: 4x 608 Ball bearings 2x M5x12 screws with corresponding nuts 4x M6x30 screws with corresponding nuts Print: 2x Spool Holder Arm 4x Spool Holder Spacer 4x Spool Holder Roller
Hello, Here's a quick remix of @6d6178 work, allowing to embed 4 magnets into the print. The magnets used are 10x2mm round neodynium magnets. Let me know if you want me to add models for the 221-413 and 221-415 wago. Print at 0.15mm layer…
Print it out of ABS as per the Voron guideline. Print one normal and mirror the second one. I recommand adding a brim to add more stability during the print. You will need two M3x10mm screws per holder. I used these strips (24V version…
A simple mount to install a Supernova V521S front light on a normal bike light support (width of 8mm, M6 screw). Use the provided screw that comes with the light. Print on the side. No support required. Printed mine in ASA with 0.4mm…
Hello, Here are some easy to print replacement handles for some cheap staple remover. Print them out of PETG (PLA is also fine, but not as durable), at your preferred layer height with 4 perimeters. Print 1x Up and 1x Down. Once printed,…
Hello, Here's a quick faucet knob. My old one was made in cheap plastic and broke. I wanted something stronger, so i added a M4 threaded insert. I would recommend printing this out of PETG, ABS or ASA. Add some support underneath the top…
Hello, Here's a replacement part for the 63827-1475 locator assembly of the 63827-1400 Molex hand crimp tool. Due to a drop, the grey plastic part from the locator assembly was deformed, thus resulting in the assembly not supporting the…
Hello, Here's a rock switch holder for an IKEA JANSJÖ lamp. My switch was causing the light to be flickering sometimes, so I wanted to change it. The switch used is a Carlington 621 series switch, but it can accept any switch with a…
This is a case with an 80mm fan mount for the Bigtreetech SKR V1.3. You willl need to get two M5x12mm screws to attach it to the K8200, four M3x10mm with matching nuts for the mainboard and four M4x8mm to screw the fan to the cover. You…
This is just a remix from Danyboy's design, but the cable is on the opposite side. Print one "Alim_droite" and one "Alim_gauche" parts. Print Settings Printer: K8200 Rafts: No Supports: No Resolution: 0.2mm Infill: 10 Category: 3D Printer…
Small support to put a logitech webcam on the side of the Z axis. You'll need 1 M4x10mm and a nut to mount it. Print Settings Printer Brand: Velleman Printer: K8200 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 10%…
Designed to be used with the original Hotend mount and with a maximum 22mm Hotend Parts needed -4 M3 Screws -1 25mm fan Simply disassemble your Hotend support, then put your new fan mount and put again your Hotend and your Hotend mount.…
Il suffit simplement de dévisser les deux espaceurs qui maintiennent la Hotend d'origine en place, de venir glisser la nouvelle Hotend dans la pièce, de mettre la pièce et la hotend dans leur emplacement, puis de venir visser les deux…
Helllo, Here's a quick wall holder for the Swisscom Montreux HD-Phone. You can print it in PLA with no support and use some VHB Tape to secure it to the wall. There's enough space behing the phone to route the charging wire. I provided…
A simple and efficient mounting bracket for a Traco TPP-150 series Power Supply Print Settings Printer: K8200 Rafts: No Supports: No Resolution: 0.2mm Infill: 10 Instructions You'll need to print two times the bracket, two M5 by 8mm Bolts…
To wszystkie aktualnie dostępne wyniki.
