Liczymy pasujące modele…
Easy print, easy assembly. Snaps together with no glue needed. Butterfly knife comb balisong with a skull for all you pirates out there combing your beards. There is a separate file for just the comb and hardware if you want to use a…
12.20 Updated files: I just realized these weren't multicolor capable so I created some STLs that can be colored as you choose. The files have "MC" in the name and the springs, stars, number and headband can be colored independently by…
This is a centerpiece for a New Year's Eve party table or tables with an optional card holder for reserving the table or adding note or menu for each table. Prints flat. Numbers are large so use a small infill of about 5% or so. Check out…
10.16.25 Strengthened the hinge connector in v2. ***** This is a USB cable mount designed to fit on the cable chain to route the beacon's USB cable along the side or top. I designed it with hinges for after the Beacon install so you don't…
Update 12.1: Added right angle version for other ornaments that need to face forward. It is noted in the file name: OrnamentHooksRightAngle.stl ***** These Christmas ornament hangers feature various seasonal icons including: a wreath,…
I used AI to make a Chevrolet Chevelle Rat Fink style hotrod in the Ed Roth tradition. It mixed and mashed some Chevy Nova, '68-'70 Chevelle, and added a Camaro rear end. I could never get it to paint in the slicer so if you want to color…
Updated 01.25.26: Increased tolerances to accommodate different materials. This is an 8 point shuriken ninja throwing start that allows you to add a US quarter in the center for weight. The cap can be removed using tabs to retrieve the…
Blank medallion keychains and coin with step file modify to fit your needs. It is about 4 cm in diameter. If you modify the size make sure you return the hole at the top to 1.25 mm or the screw version of the keychain won't work. The two…
This is a small waste bin/box with lid and fullness viewer to be used with V2 of the chute by Apok84 located here: https://www.printables.com/model/1245768-qidi-plus-4-waste-chute-optimized. You will also need the connector by GreySiD…
Simple 4 point shuriken throwing star. I also have a weighted 8 point version that uses a US quarter for weight: https://www.printables.com/model/1482626-weighted-8-point-shuriken-ninja-throwing-star-with Simple, quick, easy print with PLA.
Here you have an elephant ring finger trunk fidget toy. Enjoy! This is one of those ideas you get when laying in bed trying to go to sleep. Brain: "What if you made a ring and poked your finger through it to make an elephant's trunk?" Me:…
Simple skull and crossbones I used in another project. I added a loop so they can be used as charms or as a necklace. There are 20-40 mm sizes available so choose your poison matey.
Festive Christmas ornament for all of you dachshund lovers. Can be painted in the slicer to your liking. Can be printed clean on a smooth plate or 3d according to your preference. The Christmas themed ornament hooks seen in the photo can…
!! This is a concept design for a contest entry and currently will not print !! Crash Derby entry. It is a light sand rail dune buggy.
Simple fish I used for another project. Multicolor capable. Easy print. Best with a smooth plate. 8.5mm X 5mm tall.
I wanted a way to use the handles on a butterfly knife for the offensive so I came up with the blade in the handle solution. While probably not a good idea on a real balisong, they make for a fun toy when 3D printed. The larger size…
6-7, or Six Seven bookends to hold your children's book collection. Why not turn that brain rot into thought! Turn apopular phrase into a learning opportunity. There is another version here, but it has 3 sixes which may be a concern to…
My son and I started watching Mob Psycho again over the holidays and I wanted to print a Dimple keychain or ornament. The print is set to Christmas ornament size at 8mm it will need to be downsized for a keychain. There are two distinct…
It fits the 25mm programmable NFC tags found here: https://amzn.to/3OkkIwf (affiliate link supports the designer) This is a 5 dog set of NFC enabled tags for a keychain or collar. It has a seamless proprietary snap together seal I…
Small 7" pickleball paddle, ball, and 0-0-2 wall art. Should be built to be sliced for multicolor. I didn't have any good colors laying around to do it justice and my gold was wet during this print.
He comes down your chimney delivering madness and despair!
I tried to make an ornament of Charlie Brown's iconic rescued Christmas tree, but the details were to fine so I scaled it up into wall art. Has hole in the back to mount on small nail. Should be sliced for multiple colors as seen in the…
Should slice for 3 colors. Since everyone went naughty on my elephant finger puppet located here: https://www.printables.com/model/1504341-elephant-trunk-finger-puppet I thought I would go ahead and make a something intended for that…
2 English Bulldog Christmas Ornaments. Paint to your liking in a slicer. Use a smooth plate for best print. The Christmas themed ornament hangers in the picture can be found here:…
The number 1 guard on my shaver trimmer broke and the company no longer sells the shaver so I printed one up. It is 4mm wide by 5mm deep.
Another kitty cat thumb ring set I made for my daughter with a curious cat chasing butterflies. I made a left and right hand version which only really matters if you are printing on a smooth build plate and want the best surface forward.…
You probably have a one of these already working at your corporate job and driving you to madness. Now you can have personal cosmic entity to put on your desk while you gnash your teeth in nihilistic despair.
This is a dash mount for the $79 Carpuride C94 ( https://amzn.to/48iGrer ) 10.26 ASIN B0DHGPQDK7 for a 2013 BMW X6 (should fit the X5) that I made for a friend. It sits in the factory cubby and holds the Carpuride head unit in front of…
Version 1 of 6-7 (Six, Seven) bookends. I got some feedback about the "666" being of concern. It was supposed to read (siiiiiiix seveeeeen) but I wanted to note that in case it is a concern to you and your family. There is a version 2…
I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…
The default diameter is 31 mm. Would be good to modify for brooms, shovels, mops, PVC, and any type of pipe. One design is for a snap in place, the other is for slide in place.
Festive, fun, cheeky Christmas headband featuring mistletoe and a "Kiss Me" sign. Take your mistletoe everywhere you go. There are two versions. The standard version is thicker, takes longer to print, and is much higher quality (It is the…
Simple groundhog Phil and a 6 more weeks of winter prediction coin.
This was an ad hoc creation to fix the wheel connector on the upper rack of a Kenmore dishwasher model 665.13223N41. This IS NOT a factory replica or does it resemble anything that probably went there originally. I looked at the holes and…
I made this simple Groundhog Day spinner for the kids and thought I would share it. The top and bottom groundhog can be painted independently. I would purge into the model to save some filament. It is 8x8 cm.
This is a jig to fit Stew675's Qidi Plus 4 beacon mount for the annealing process if you want to go the extra mile of annealing your beacon mount for heat and durability.
This is designed to attach to the bars of a small animal cage under the watering tank. I use this tank: https://amzn.to/4rmKJKB and the small super absorbent sponge here: https://amzn.to/4onQJjj Printed in PETG translucent due to contact…
I have been battling leaky water bottles for years in our guinea pig cage. Tried just about every one out there. Finally found a solution using this chicken waterer with bowl: https://amzn.to/45eRcOa Because it has to be low and on the…
I got tired of the forks, spoons and knives sliding to the back of the drawer on opening and closing so I made a stop. The width is 98mm. Length and width can be adjusted in the step file for your drawer needs. It creates a small space…
To wszystkie aktualnie dostępne wyniki.
