Liczymy pasujące modele…
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 60% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.2.1 Wall thickness 2.8 mm Top/bottom 2.8 mm Printing…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes ("tree" — easier to remove ) Resolution: 0.12 Filament brand: Esun Filament color and material: grey PLA-gloss, yellow ABS+ Postprinting: To remove thread supports, I use…
Printed in "as located on rail" position with supports. Update 14.04.2024: Added a mirror version for placement on the other end of the rail. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50%…
20.08.2023 Improved ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.12 Infill: 20% Filament brand: Esun Filament color: red, signal red Filament material: PLA+ Slicer: Ultimaker Cura 5.4.0 Wall…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, blue Filament material: PLA+ Slicer: Ultimaker Cura 5.2.1 Wall thickness 2 mm Top/bottom 2 mm Printing…
Printed in "as located on rail" position with supports. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker…
20.08.2023 Improved ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes ("tree" — easier to remove ) Resolution: 0.12 (signal red); 0.2 (red) Infill: 40% Filament brand: Esun Filament color: red, signal red…
I printed 10 layers (summary 2 mm) with a layer of 0.2 mm black filament, then changed the filament to white. Holes for magnets 3*2 mm. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Filament brand:…
Update 03.09.2023: Improved "click and clean" ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes (only "base" detail) Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, light blue Filament…
The model shows the designed size of the holes. Actual size may vary slightly due to different shrinkage of materials used. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament brand:…
23.08.2023 Added restyling of the previous design (marked "NEW"). 03.08.2023 Added files (.f3d) for creating threads of different hose sizes and a blank of the main part, in which you can place your own thread. Plate size 80 x 100 x 5…
Does not damage Slideway lining. Options: front and rear (marked). Need an M6 * 20 bolt and a knob https://www.printables.com/model/371220-festool-nut-knob-thread-m6 Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No…
Update 18.03.2024: Added custom versions of the model with left and right nuts, allowing printing with minimal support. Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand: Flying Bear Printer:…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: yes (tree) Resolution: 0.12 Infill: 100% Filament brand: Esun Filament color: signal red Filament material: PLA+ Slicer: Ultimaker Cura 5.4.0 Wall thickness 1.2 mm Top/bottom…
Carrot halves are exactly the same. The haulm are mirror-symmetrical. Holes for magnets 3*2 mm. Printing a fridge magnet: carrot - 1 part; haulm - 1 any part. Printing a whole carrot: carrot - 2 parts; haulm - 2 symmetrical parts. Printer…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.1 Infill: 15% Filament brand: Esun Filament color: purple, orange, silver, blue, light blue, olive green, black, white, red, signal red, yellow. Filament…
20.08.2023 Improved ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color: blue Filament material: PLA+ Slicer: Ultimaker Cura 5.4.0 Printing…
The gasket cutter is posted here: https://www.printables.com/model/965991-bosch-gas-old-vac-gasket-cutter There's more here: https://www.printables.com/model/690329-bosch-gas-old-vacuum-cleaner-hose-45-mm-40-mm-and- Printer brand: Flying…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color and material: grey PLA-gloss, blue PLA+, white PETG Postprinting: (only for thread) Dremel, CH2Cl2 Slicer:…
Update: Designed an improved version, following a link https://www.printables.com/model/527510-festool-built-in-thread-splinter-guard-sp-ts-55-r- Fixing knob is here https://www.printables.com/model/384802-festool-bolt-knob Printer brand:…
You can insert the pliers into the cap with the locking lever deactivated — the cap securely holds the pliers in the closed position. When you take out the pliers, the locking lever is activated by friction. I also designed a double sided…
Early version: https://www.printables.com/model/363198-festool-built-in-thread-splinter-guard-sp-ts-55-r CHANGES: — The size of the thread has been increased (now the screw is wrapped more easily). — The thickness of the body into which…
Ideal for a cyclone on top of a vacuum cleaner. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: yes Resolution: 0.12 Infill: 20% Filament brand: Esun Filament color: signal red Filament material: PLA+ Slicer: Ultimaker Cura…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: black Filament material: PLA+ Slicer: Ultimaker Cura 5.2.1 Wall thickness 4 mm Top/bottom 2.8 mm Printing…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.2 Infill: 60% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.2.1 Wall thickness 2.4 mm Top/bottom 1.8 mm Printing…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: grey Filament material: eTPU-95A Slicer: Ultimaker Cura 5.5.0 Printing temperature: 228 Celsium Build…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: grey Filament material: eTPU-95A Slicer: Ultimaker Cura 5.4.0 Printing temperature: 228 Celsium Build…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.2.1 Wall thickness 2.0 mm Top/bottom 2.0 mm…
Gasket size: ID=49 mm; OD=66 mm. Printer brand: Creality Printer: K1 Rafts:No Supports: No Resolution: 0.2 Infill: 50 Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.5.0 Wall thickness 1.2 mm…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.1 Infill: 100% Filament brand: Esun Filament color: purple Filament material: PLA+ Slicer: Ultimaker Cura 5.2.1 Wall thickness 1.2 mm Top/bottom 1.2 mm…
The original coupling broke (ivory in the photo). I made it from PLA+ (light blue in the photo) - it lasted for 20 minutes of work, melted and fell apart. Made from PETG (white in the photo). After an hour of work, I disassembled the…
Printer brand: Flying Bear Printer: Ghost6 Supports: No Resolution: 0.12 Infill: 100% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.4.0 Printing temperature: 245 Celsium Build plate: 80…
Update 31.08.2023: The cover is now multilevel and can be printed in three different colors. You can print with a layer height of 0.1 or 0.2 mm (You can control in your slicer.) I printed with a layer height of 0.2 mm. - 9 layers (1.8 mm)…
Cup size 68*68*108 Flag size 100*60 The colored elements are inserted into the grooves and fixed with superglue. To achieve a smooth surface, I printed color elements face down. On the bottom of the cup, recesses with a diameter of 8 mm…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: white Filament material: PETG, TPU-95A (If you print it from TPU, it will never break) Slicer: Ultimaker…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: white Filament material: PETG, TPU-95A (If you print it from TPU, it will never break) Slicer: Ultimaker…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: grey Filament material: eTPU-95A Slicer: Ultimaker Cura 5.4.0 Printing temperature: 228 Celsium Build…
Holes for magnets 3*2 mm. Dimensions: 86*54*4.1 mm Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: olive PLA+, yellow ABS+ Filament material: PLA+; ABS+…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: purple Filament material: ABS+ Slicer: Ultimaker Cura 5.4.0 Printing temperature: 250 Celsium Build…
Holes for screws 3.2 mm. Distance between holes 21 mm. Hole depth 13.4 mm. Dimensions: 60*50*15 mm Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Filament brand: Esun Filament color: yellow Filament…
Includes 14 storage cups for organisation and storage of small parts, components and accessories. Wall thickness 1.6 mm The number of required parts is indicated in the file names. Printer brand: Flying Bear Printer: Ghost6 Rafts: No…
To wszystkie aktualnie dostępne wyniki.
