Liczymy pasujące modele…
Easy to print yet very well working pinwheel, looking more like wind turbine. It uses common bearings easy to find in DIY stores or in sport equipment stores (they are used in roller skates). All parts fit into 18x18x18cm volume printer,…
This is improved version of the great model heavily modified by Rod. I tweaked a stiff shutter mechanism to move a bit more freely and added tracks in two version - for IKEA tracks and for any other brand (Brio, Bigjigs…) as IKEA is using…
I printed with PLA 0,2 layer height, no special print settings needed.
It is funny that I downloaded like 20 connectors from here and yet I had to make my own. Most of them were too loose or unfriendly to print. This easy connector fits just right, not too tight, not too loose. Easy for small kids to use.…
Robust cash box with opening on top and protrusion allowing the use of a padlock.
As original but with screw
After printing all hobby knive caps in here I had to make my own because none of them suited excel knife together with its stock blade. Excel knife is very common where I live, so I hope someone will find this useful. Printing with 0,1mm…
Fits tight on6mm spindle, works great. Editable Fusion 360 model attached for easy modification for other uses/grill brands.
I created extremely simple spool holder for all those without side spool holders or those with 4T INDX with spool holders on the other side and who already printed their extended bin (Revision 3). With this holder you can use this bin…
Replacement key for the Barbie VW Beetle toy car (2000) to open the trunk. Found some replacement keys on ebay but why should pay if you can print it by yourself :) This model is based on measrumenet of car itself, without the original…
Little improved garbage truck attachment compatible with Lego DUPLO. I added little bumps on both sides to keep the lid closed and preventing garbage truck losing its waste on the way.
I created extremely simple draught shield for all those who already printed their extended bin (Revision 3). You can use this shield with stock extended bin without any modifications, but it has to be in specific position to do its job.…
Only two little Snag supports required
While Light piece has only a hole for LED obviously, the Cover piece is containing also print settings. Because you want it to be transparent, right? All the text below is related to the Cover piece: Use clear PETG. Do not even try…
Replacement license plate for the Barbie VW Beetle toy car (2000) used also as a cover for the trunk keyhole. Print-friendly shape, without supports. Set more perimeters for improved durability, I printed it with 4 perimeters using 0.4mm…
A simple, easy-to-print clamp to prevent the PTFE tube from moving. It is secured with an M3 screw. The recommended screw length is 6 to 10 mm (it can be longer, but it will stick out then).
My kid wanted to learn how to count along with reading numbers when he was really small. I could not find any abascus with numbers so I created one. I made it only up to 50 to keep the whole assembly compact and easy to carry for 3yo kid.…
Mockup of Quartz Wall Clock Movement Mechanism that is widely available on internet and home improvement and do-it-yourself goods retail stores. Useful when you want to create your own clocks around it :)
The whole shape is beefier and wedged to eliminate the need of additional angle backs, thus making the whole pedal stiffer. I printed mine with PC-CF cause I already had it loaded in my printer but any strong filament should do.
Rotating addition to the existing harvester model. No supports, glue or screws needed (it is a toy for kids after all). I made two variants - one with printed TPU/TPE tyres for better grip on smooth surfaces and second one easier to print…
I printed it with PC/ABS filament, some kind of PC blend or Nylon is recommended, PLA or PETG can't handle such a speed and load. Also use 0.25mm nozzle for proper teeth geometry to reduce belt wear.
Just a stand with a base, glued together with superglue. No special material or settings required.
Replacement part in case of damage of the original one. Not 1:1 replica, designed to fit but also to be strong and able to be printed. Tested on PETG, PLA not recommended. Use supports moderatly and on printbed only. Reinforced version is…
Case for smart home display of 5.83" size. Electronic components used: E-Ink display: Good Display GDEQ0583T81 5.83" 648x480 ePaper display Grayscale | LaskaKit ESP32 + e-ink controller LaskaKit ESPink ESP32 e-Paper | LaskaKit CO2 +…
Modified servo arm for use with Mini Rescuer. Print with 0,15mm layer height.
Tested with PLA, decided to print mine from TPE for better durability during crashes (it's for kids). Mounted to the bike frame with zip ties. No supports needed. Bunch of frame diameters included, if you need specific size, let me know.
Gently press it into the soil. Do not use excessive force. If it does not go in on the first try, try moving it back and forth a few times in small increments. The irrigation holes should be small enough so that the water does not simply…
Adapter for mounting flashlight to your Peak Design Capture. Made for my Fenix HM61R Amber V2.0 but you will probably find more uses. I printed mine from PC with carbon fiber, but any material should do. Print without changing…
Switch holder that fits perfectly to the QuicRun 1060 V2 60A (and probably also its clones) and ensures a reliable attachment without unnecessary stress on parts.
PTFE holder remixed for only 4T version of INDX
I bought stronger steering servo for my Mini Rescuer but found out server arms provided with the model were too small. I remixed one to make it XL size. Fits perfectly my Savox SW-0267 MG.
Case for ePaper, some environment sensor and decent battery too. The board with ePaper (and everything else) can be bought here LaskaKit ESPink-Shelf-2.13 ESP32 e-Paper | LaskaKit All parts can be printed without supports. ePaper board…
So, I finally sorted this out! Not only do I no longer need to pull the printer off the shelf and tip it on its side to change the filter, but I can now easily slide the whole filter out when printing PLA (to extend its lifespan). I also…
Fits my Yamaha EZ-30. I uploaded also STEP file for easy modification.
To wszystkie aktualnie dostępne wyniki.
