Liczymy pasujące modele…
The original library is from marcaxi with improvements by rubisco2000. I rewrote it to create a single polyhedron instead of using the hull operator and unions to join different triangles together, this brings huge performance…
This Customizer can make any drawn shape into a slinky, also it includes a generator for stars and polygons, a polygon with a high number of points becomes a circle. The profile includes a separator between the coils to minimize the…
Created with: http://www.thingiverse.com/thing:2002792 I used this OpenClipart: https://openclipart.org/detail/116629/rabbit-silhouette It can even walk down a couple of steps when tossed just right, check out the animated gif! Print…
Had this design lying on my disk for 2.5 years, so now I finally decided to finish it. This improves on my old measuring cylinder by adding a beak, a handle and an optional stand. It is fully customizable, when increasing the radius make…
Basically the same as my measuring cylinder version 2, but this one has the ticks also on the inside. It is fully customizable, for details look at the description of v2: https://www.thingiverse.com/thing:4333484 Category: Household…
I made a customizable version of henrysegs ingenious design that uses stereographic projection to project a grid from a sphere to a plane: http://www.thingiverse.com/thing:202774 You can simply upload an image with the size of 75x75 and…
The part with the knob tends to break off when it is too weak, so make sure it is printed strong. This model is also fully customizable, so you could for example try to increase gap_height when it keeps breaking off. It is a little…
After five years a lot of the plastic parts of our Intex Pool degraded significantly or broke, these clamps are affected the most. I measured them as closely as possible and this is almost a perfect replica, but with the scad file it is…
This is the last replacement part that was missing for our Intex pool. It prints fine without support and is also fully customizable. Category: Replacement Parts
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ This took over 2,5 days to render at a resolution of 500x500. Source of inspiration https://mcescher.com/ Category: Math Art
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ functions in polar coordinates: f(x) =x/15+sin(x?5)^2?2 g(x)=?x/15+sin(x?5)^2?2 Category: Math Art
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ functions in polar coordinates: f(x) =x/20+sin(x?50)/15 g(x) =?x/20+sin(x?50)/15 It's a little streched out as the x-axis was wider…
These clamps need to endure some serious physical stress, so they need to be printed as strong as possible to not break when they are inserted. They are fully customizable so it would also be possible to make them a little smaller or…
Created locally with: http://www.thingiverse.com/thing:1216198 and this script: http://jsfiddle.net/threonin/6dr8qu41/ It is 500x500 pixels, but finished while I was watching a movie, so it seems the script got much faster when I changed…
Highres version of http://www.thingiverse.com/thing:2078413 This allows using pictures with 85x85 pixels instead of 55x55, but it is also considerably bigger. I used these 10W power LEDs, here they come bundled with drivers:…
This is the fractal generator I originally had in mind, not the strange 3D Line Fractal generator I made earlier, which can yield some interesting results in it's own regard, but gets to chaotic in higher recursions. Basically this is a…
This is the ultimate cubic fractal, each face will be completely covered with child cubes of all the following recursion levels. This was tough to figure out as I am not used to the declarative programming style used by OpenSCAD, but…
Revised version of http://www.thingiverse.com/thing:1884080 The chassis is now a lot less bulky and consists of multiple parts, the pulleys move more easily now. Before printing everything it is best to print a couple chain links to see…
This projects a grid and additional concentric circles. High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
I used my old concentric sphere intersection script on Jbaumgartners awesome Ultimate Desk Organizer, I think for this model it works great. I couldn't print it at 100% at my Flashforge Creator Pro, but 80% still looks fine. Printed at…
Customized version of http://www.thingiverse.com/thing:296967 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=296967 Instructions Using the following options: outer_radius = 100 image =…
Created with http://www.thingiverse.com/thing:2094215 The lamp body of the original design can be used. Yellow is probably not the best choice for the projector, a darker filament would have been better to block out light at the "black"…
This replaces the staff tip from Armatus design to allow for a bigger range of motion of the wings. https://www.thingiverse.com/thing:2416804 To provide better stability three M3 3cm and six M3 2cm screws are used. Category: Props
Created with http://www.thingiverse.com/thing:2094215 The lamp body of the original design can be used. Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.3mm Notes: Print took…
A newer version of this design is available here: http://www.thingiverse.com/thing:1911788 This is my first design with moving parts, a fully customziable simple escalator. When leaving out the steps it can also be used as a conveyor belt…
For my many potted plants I am using an automated watering system from Gardena, this requires a dripper at the beginning of every water circuit to prevent the law of communicating vessels to empty the water tank. Before I was using water…
A newer, actually printable version is here: http://www.thingiverse.com/thing:1922547 I modified the script to support simple halftone dithering, so each pixel can have a gray value between 0 and 1, the brighter the pixel is, the bigger…
Customized version of http://www.thingiverse.com/thing:1216198 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1216198 Testing customizer with Mona Lisa. Instructions Using the following options:…
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
This thing adds a simple lamp chassis for my stereographic picture projector v2: http://www.thingiverse.com/thing:1922547 The projector itself now has a thread to mount it to the chassis which can be easily replaced to experiment with…
Customized version of http://www.thingiverse.com/thing:418129 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=418129 High res version created locally with openscad and this script:…
Basically the same as http://www.thingiverse.com/thing:295281 but the form is no sphere but is flattened to some kind of mushroom shape. The customizer takes 75x75 images, but you must be very careful that no diagonally touching pixels…
By changing the resolution back down to 55x55 pixels I can actually slice the skull in Simplify3D! Printed fine without any tearing, it was probably due to the way too thin walls at 85x85. It is by default scaled to 88%, the lowest it…
Created with http://www.thingiverse.com/thing:2094215 The lamp body of the original design can be used. Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.3mm Notes: Printed in 9h…
I reduced the blocksize to 5mm, this gives a nicer result. Category: Animals
Customized version of http://www.thingiverse.com/thing:418129 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=418129 High res version created locally with openscad and this script:…
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
Revised version of http://www.thingiverse.com/thing:294899 Thanks to henrysegs tip the projection of the border region will now be much clearer. Wall thickness can be higher now without losing detail, all other instructions of the first…
Three sets of concentric circles overlap. High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
Basically the same as http://www.thingiverse.com/thing:295281 but this time the bottom is flattened so it is easier to print. The customizer takes 75x75 images, but you must be very careful that no diagonally touching pixels occur, as a…
A newer version with a screw-on lamp chassis can be found here: http://www.thingiverse.com/thing:2078413 I played around with the parameters of my old design http://www.thingiverse.com/thing:1216198 a bit and actually got it printable. I…
A newer version with a screw-on lamp chassis can be found here: http://www.thingiverse.com/thing:2094215 Highres version of http://www.thingiverse.com/thing:1922547 This one uses 85x85 pixels instead of 55x55, but also is bigger. It is 15…
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
Simple fractal obtained by replacing every line of a shape with the shape itself. Sadly I cannot use the canvas for this, as it places the points to close to each other, points have to be specified in the OpenSCAD format. Some important…
Again big thanks to Joe Balint for suggesting to simply remove the corners for easier printing! This way I was able to crank the resolution up to 100x100 pixels and have it still sliceable in Simplify3D! Make sure to have no important…
Big thanks to Joe Balint for coming up with the idea to use a skull for the stereographic projection! I modified my script to create a difference from a hollowed out skull and the projected picture, so adding a light in the correct…
I made a simple OpenSCAD script to overlay a grid on an imported stl to create a simple checkered pattern for dual extrusion. Sadly OpenSCAD is quite picky about the imported stls, they have to be manifold and probably meet some other…
Like http://www.thingiverse.com/thing:420714 but with the direction flipped along the diagonal to allow for easier printing. High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Big thanks…
This is basically the same as http://www.thingiverse.com/thing:295281 but with just 75x75 pixels instead of 150x150, this works in customizer just fine, maybe the highres version will work later, I filed a bug report for customizer. If…
This Customizer uses Brownian Noise to generate random cat patterns. Seed, number of blocks and block density can be changed with parameters. Preview may not be very accurate or time out for higher block numbers, but the rendered parts…
In this generator Brownian Noise is used to place blocks in a random pattern where each position has a higher probability to contain a block when the surrounding positions also contain a block. By changing the seed you can get different…
Customized version of http://www.thingiverse.com/thing:281634 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=281634 Instructions Using the following options: appendage = 10 thickness = 3…
High res version created locally with openscad and this script: http://jsfiddle.net/threonin/3j2c2pwe/ Category: Math Art
This fractal uses a 2D line to describe the 3D object each face is replaced with. Not all lines can produce a manifold mesh, some tweaking is required to find suitable values. This fractal is not what I had originally planned, but it can…
This script intersects an imported stl with spheres arranged in a grid, generating a dotted pattern. Category: Art
This script intersects an imported mesh with concentric spheres to prepare a simple structure for dual extrusion. With andresrojas cat this yields a nice tiger cat! I had to decimate the vertices with blender to make it work as it did not…
Customized version of http://www.thingiverse.com/thing:288157 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=288157 Instructions Using the following options: appendage = 13 build_plate_manual_y = 100…
After upgrading my Rostock Max v3 to a 3.2 I decided to install a 7i PanelDue touchscreen. This can just be plugged in to the Duet2 board, so I needed a proper way to mount it. This is just a modification of LumberjackEngineerings case…
Customized version of http://www.thingiverse.com/thing:288157 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=288157 Instructions Using the following options: appendage = 10 build_plate_manual_y = 100…
To wszystkie aktualnie dostępne wyniki.
