Liczymy pasujące modele…
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Confirmed with nozzle 0.4mm and layer height 0.2mm. I recreated this 3D and model so it's easier to print and rotate. PURSA slicer's easy mode is sufficient for settings. -Update- I added a model where each side is flat. This one is…
I designed two door stopper structures using TPU filament. The wavy one is softer, and the hexagonal one is harder. The shape motif is a tire that does not use air. Both can be printed with other materials, in which case they are…
The original design is very good, so I made the shape of the horn based on it. Therefore, when printing, it is recommended to lay it on its side and set some support material. I think PLA or PETG are good materials. -UPDATE- Since the…
I couldn't find a suitable size tray to clean up around the printer. So I drafted. I think this is a suitable size for printing with the Prusa mini after checking the flatness of the 75*75mm sheet. The walls are thick enough, so I don't…
This is an adapter for mounting an optical sight on an airsoft gun from Tokyo Marui. Similar adapters are available on the market for Glock, etc., but the size did not fit my XDM-40, so I made this adapter. - - - UPDATE! - - - - - - - - -…
This is a case to mount GODOX AD200 PRO on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a…
This airsoft gun can be assembled with a dedicated optical sight, but I have a generic one and wanted to put it on, so I made this one. The higher position of the optical sight may cause it to deviate from the adjustment range. Once this…
This is a case to mount GODOX AD200 on a pole. Although the distance between the head and the main body can be separated using the EC200, I made a simple case to fix the main body to the pole. The pole and the case are fixed with a band.…
This is an adapter that mounts a 140mm fan into an 80mm square hole. Fix the fan with screws and fix the holes with glue or the like. It's like a thin duct. I thought I'd use an extra fan to exhaust the air. I think PLA is sufficient for…
I designed a bit that uses an electric screwdriver to turn the cap. You can insert the bit into the hex shaft of the electric screwdriver and turn the bottle cap. PET bottle caps are made of a different material than bottles, so they need…
The flat part is considered the bottom, and the part with the protrusion is considered the top. The second photo shows the printed bearing installed. https://www.printables.com/model/173761-mecha-phonetablet-stand/comments/1825421…
Someone mentioned that large umbrellas are hard to carry, so I made a holder. It have a Picatinny Rail (20mm rail) and a Modular Lock (M-LOK), but it is not particularly meaningful. It might be somewhat useful to add a light or a hanging…
It is recommended that the pitch be fine and the infill be large. The camera was fixed with double-sided tape.
The material is recommended to be PETG because it generates more heat than expected. When printing SHADE, set the infill size to whatever size you want. The thickness of the LED is assumed to be 2 mm, so use less than that. You can print…
I wanted to do something with the excess parts when assembling the Metal Rack. It fits Japanese 25mm diameter poles. It can be printed in sections or printed in one go. I have the camera fixed on a plane.
The original duct is meant to connect to Noctua, but I wanted to connect it to my fan. I designed two clips. And made sure the duct didn't cover the switch. I aimed for a model that was 25mm thick. Printing the duct takes time, so I…
This is a cover for a self-made keyboard. It protects the exposed PCB from dust and short-circuiting due to contact with something. It is not waterproof due to its sliding structure. This cover fits the following products. meishi2 kit…
This mimics a drill, but cannot make holes. I made it possible to hold. Since the slope is treated as a wall, I recommend a wall thickness of about 4 layers. I will also upload gcode as a sample. Please set support for the thumbhole. I…
I designed a cover over the tip to avoid contact with people or other equipment when moving the light stand. Support material settings are required when printing. Since there is a 1/4 screw inside, a pitch of 0.15mm is recommended. The…
To wszystkie aktualnie dostępne wyniki.
