Liczymy pasujące modele…
Simple automatic (self-locking) child safety lock for cabinet drawers. For mounting both parts you can use: high-quality double-sided adhesive tape 2 pcs small screws for hook I recommend to use adhesive tape + screw Recommened print…
I recommend sticking a piece of gasket on the entrance edge. It is designed for old Bosch washing machine, but you can use it for any other machine for which it will be suitable. The neck of the container is 30 mm from the ground.…
There is a two upgrade options: a) lock a bolt (by a small screw M2 in the hole on the head) b) for more durable design you can insert a metal round rod into the grip
Simple silica gel container for filament spool. Try my new model Evo; https://www.printables.com/cs/model/955584-silica)
Holder for classic chainsaw chain 3/8" (9,32 mm) 1,3 mm with space for magnets 29x5 mm. For uses with 125 mm vice.
For the hole 22 mm and hose 1/2". Printing from ASA or PETG.
My reccomended print settings: PLA or PETG 4 perimeters 7 top solid layers basic support needed (look at the picture) Suggestion: glue a self-adhesive rubber pads on the bottom
Basic dimensions: designed for a hole measuring 141 x 135 mm Recommened print settings: layer height 0,2-0,3 mm material PETG, ASA (reccommended), ... 4 perimeters no supports needed
Simple automatic (self-locking) child safety lock for cabinet drawers and doors. Lower vesrion use for door with sharp corners. Longer vesrion use for door with rounded and sharp corners. For mounting you can use: high-quality…
Screwdriver holders set for 6,3 and 4 mm bits with option of magnet inserts (neodym magnet diameter 8 mm, height 3,5 mm). Print from PLA or PETG. Three versions: basic - for 6,3 mm bits V2 - for 6,3 mm bits with finger blocker V2 little -…
For the hole 28 mm and hose 1". Printing from ASA or PETG. Variable layer height (for the thread 0,1 mm). For the printing is suitable to use cut tool in the Slicer (according to the photo).
For the hole 28 mm and hose 1". Printing from ASA or PETG. Variable layer height (for the thread 0,10-015 mm).
Replacement for the original part of the Parkside chainsaw sharpener holder. I recommend dividing the model into objects (split to objects function in slicer) for easier printing with minimal supports (look at the pictures).
230 V socket holder for desktop mounting by screws. The cable can be attached by zip tie. I used: 230 V socket holder Z134F (073-102 from gme.cz) switch BULGIN C5503PBBR3 (631-058 from gme.cz) flexo power cord 3x2,5mm2 M4 threaded inserts…
My print reccomended tips: 3 perimeters, 100 % infill ASA or PETG 0,1-0,15 mm layer height (important for the thread printing) fuzzy skin on outside walls (for the rougher cap surface) 0,4 mm nozzle use a brim no support needed For the…
Třmínek lze přišroubovat pomocí vrutu. Doporučuji tisk z ASA. Stirrup can be instaled by the screw. Print from ASA.
In combination with blinding the tube will slow down the drying of the silicon.
Odpalovací rampa pro hru Kloboučku hop.
The main holder attach to Velux handle using a 2 pcs zip tie. Install the holder to the Velux handle in the correct orientation - see photos. There are two sizes of opening handle: 160 mm (shorter), 220 mm (longer). Recommened print…
Shelf for VESA 200 mm with small holes for cables and USB port.
Custom wheels for the fire competition distributor - individual fire sport. Suitable for M16 screw - thread in model. Before use, it is a good idea to adjust the thread with a tap. My recommended print settings: 4 perimeters, 50 % infill,…
In addition, you need magnet 12x7,5x8,5 mm spring - diameter cca 5 mm, lenght 12-15 mm
You can join cover and holder by 2 pieces of M3x6 screw, or you can use attached pins.
Three optional expansion options: the possibility of choosing light intensity (with resistor Rx and extra slide switch) the possibility of inserting magnets for installation on the wall for greater dispersion of light, the possibility of…
For completing devices you need: 12V 80 mm PC BRUSHLESS fan (80x80x25, or 80x80x10.8) glass container with outer diameter 148 mm and min. height 190 mm (I use glass vase from Pepco, SKU 35327801) 4x M3 screw (lenght 6-10 mm) + screw tap…
Simple expansion vessel for the heating ladder. Thread G20.955x1.814 (lenght 13 mm). With mini hole on the top. The rubber seal must be used for mounting. Print without supports from PETG or ASA. You can use/insert (during printing) a…
Automatic disinfectant dispenser for the toilet tank - with each flush, the device dispenses a small amount of disinfectant into the toilet tank, which keeps both the tank itself clean and the toilet area better cleaned. Parts main body…
The basic dimensions of a children's sideboard are 160 x 100 x 15 mm. Recommened print settings: layer height 0,2-0,3 mm material PLA, PETG, ... 2 perimeters 15% infill no support needed
To wszystkie aktualnie dostępne wyniki.
