Liczymy pasujące modele…
This is for use with PRUSA i3 MK3S+, MK3S+:MMU2S & MK2.5S+ printers. Designed to be used with TheZeroBeast MK3S:MMU2S Firmware here... " https://github.com/TheZeroBeast/TZB-MMU2S-Firmware/releases " V3 Changes combine with R6 stock…
This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…
Improvements to the filament path to resolve issues I was having with the curly end of a spool not unloading reliably. Added dual blade in same selector dimensions, please note this does require TZB-MMU2S firmware to cut successfully.…
I have designed these models and manually customised the G Code to print these tests with desired test parameters. Single wall models for speed, each model taking about 20 minutes to print. Stl files are included if you desire to…
Australian Clipsal Single gang switch face plate. Designed to print in Glo-in-the-dark filament for locating switch easier in the dark. Also is great for customising a room. Print Settings Printer: Winbo SH155L Rafts: No Supports: No…
Modified design to incorporate the Manfrotto QR-RC2 quick release and a 1/4" thread for universal phone mount. Category: 3D Printing
Designed to use with LUCAS White Lithium Grease 8oz tube to pack grease in LMUU8 bearing in the PRUSA i3 MK3. I needed to design this for the below article when I couldn't find one that fitting the tube of lithium grease I already had for…
Shout out to TNDave for the basic idea, this is re-designed with my own touches and the ability to use my favourite fitting, the M10 passthrough. This is for use with PRUSA i3 MK3S :MMU2S printers. Designed to be used with TheZeroBeast…
Another redo with better printing, 8mm magnet upgrade and blade support. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PETG Grey Notes: Any material does…
This attaches to the edge of a 38mm cube organiser with a pea sized piece of blutak to hold PS4 controllers. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 40% Category: Organization
This attaches to the edge of a 38mm cube organiser with a pea sized piece of blutak to hold xBox One S controllers. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40% Notes: Print on…
Container for kitchen Utensils Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.48mm Infill: 0%, eg. Vase mode Notes: Printed with 0.8mm nozzle but should be just as effective with 0.4mm nozzle,…
This is my personal take on the Lack 3D Printer Enclosure, it is constantly evolving but at present is a MK3 MMUv2 enclosure on top and MK2.5 on the bottom. From an initial idea of the cabinet I have faced some hurdles that I have…
Designed for PRUSA Research 1kg spools Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 350micron Infill: 30% Category: 3D Printer Accessories
Designed for use with a simple opto endstop as pictured above. Top has 4mm seat for a reverse Bowden tube to your spool. Once you have it wired and tested with filament that it sensors correct in the PRUSA LCD menu, hot glue sensor it…
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 Designed to mount IR Raspberry Pi Cam…
THIS IS PART OF AN OVERALL Lack Enclosure design: https://www.thingiverse.com/thing:3129929 This is take two on the Original PRUSA i3 MK3/MK2.5 MMUv2 Backfeed situation for those that are having issues with alternate mounting as I was.…
Vase container for Knives in the kitchen. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.48mm Infill: 0%, eg. Vase mode Notes: Printed with 0.8mm nozzle but should be almost as effective with the…
Mesh modified to clip over the top of a bench pinboard and hold the SPANNERHAND Spool system. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 350micron Infill: 30% Category: 3D Printer Accessories
Designed for the Tiny6 5-Way battery charger as the connections flex if moving board while charging. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Post-Printing Step 1. Start…
To wszystkie aktualnie dostępne wyniki.
