Liczymy pasujące modele…
Made a mod to fit a EBB42, LGX and a cablegland for umbilical, using active cooling to keep both stepper and EBB cooled down. Bom: 2x M3x14 SHSC 6x M3x18 SHSC 2x M3x20 SHCS 2x M3x30 SHCS 5x M3x6 BHCS 1x M3x8 BHCS 8x Heatinserts M3x5x4 1x…
A easy mod to invert your z-chains BOM: 3 x heatinserts M3x5x4 4 x M3 rollin T-nut 3 x M3 x 6 SHCS 1 x M3 x 10 BHCS 3 x M3 x 6(8) BHCS X/Y chains Printsettings: 4walls, 5 top/bottom, 40% grid infill, 0.2 layer, 0.4 width, no support.
Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament. Removed the e3d fastener in the bottom, removed the old AB ducts,…
I got tired of the panelclips on the original 3mm acrylic panels, the foam glided down and the panels was moving towards gantry so it got scraped. Made a printable frame in 16 pieces to acomondate foam and hold the panel tight against the…
This is a quick remix of the excellent mod on voron github: https://github.com/VoronDesign/VoronUsers/tree/master/abandoned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber…
Wanted to move the powerswitch to the left side and the power inlet + ethernet to front right side for easier acess. Re cad:ed the original side skirt with a filtered inlet and a keystone opening. Redid frontskirt based on V2.4 Z-Drive…
Made a removable stabilizer for Prusa enclosure, it was a bit wobbly because of the open frame. Predrilled holes in the plastic for the screw and then glued the holders in place and secured it with 2 screws on each side. Its made for M10…
Love the design and functionality of the universal spoolholder but both the old and new one didnt take all my diffrent spools so i decided to make my own version. Made it in Fusion 360 eyeballing the original design, thou i did the thread…
A frame for a external spoolholder thats based on https://www.printables.com/model/1138580-external-spoolholder-flsun-t1 , u need the universal spoolholder (my remix here…
Added bedfans to fit the original extrusion cover. Added inverted z-chain files (inverted z-chain cover 1+2 and upper + bottom)
Since i have small children i looked around for a protection case for the Apple TV remote, but the ones that protected the remote was interfering with the touchpad so i made my own. Made the model in Fusion 360. It require some double…
Voron Triden fan skirts for Noctua A6x25, modified it 7mm out to fit the fans without changing the inside space. Printsettings: 5 top, 5 bottom, 4 walls and 40% infill Best printed with ABS or in worst case PETG As always a big thanks to…
Made a sturdier wallmount, u can use up to 40mm spacer on both sides to get some offload. U need to use support on buildplate for the hole in the middle. Print Settings Printer: Voron 2.4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40…
To wszystkie aktualnie dostępne wyniki.
