Liczymy pasujące modele…
Easy print-in-place filament guider for BIQU B1 3D printer. Layer height 0.16. and I used support only for the arm. Position the model with the flat part of the wheel on the bed
28.07.2024 UPDATE I have made modifications of the design, as follows: Body: 1. geometry updated to use less supports 2. added custom supports to use less material 3. the wheels pins modified to snap in easily Turret: no changes Turret…
I have designed a very simple model of a bookmark. Use color change to print it to your liking.
Background: In ancient times, Dacia was the name given to the area of Central Europe bounded by the Carpathian Mountains . This area corresponds roughly to the modern countries of Romania and Moldovia. The Dacian Wolf or Draco , the most…
I printed this using 0.16 mm layer height, and added a negative cylinder and cone part so it can be used as a tree topper.
This 3D-printable cover adds a touch of volcanic elegance to your liquid cooler, boasting an iris shutter mechanism that conceals and unveils the Cooler Master logo at your command. The design draws inspiration from the raw power of a…
Update 01: I had to switch the second screw thread direction(I designed it wrong), and added a fillet to the handle to be more sturdy. Print settings: I would recommend at least 55% infill for the screws and handle , other parts print as…
I have managed to install this mod on Biqu B1, but I had to do some adaptations: 1. 1_RightV3.7 - modified the location of the bolt from inside - it was 0.5 mm closer to the extrusion 2. the Bottom part I also modified it so it can be…
Print this with a 0.2 mm layer height and using color change at 0.6 mm. 0.6 mm height printed with beige 0.6 mm height printed with silk black
Introducing the enhanced MasterLiquid Atmos AIO Liquid Cooler, now featuring a custom addition—a meticulously crafted hand seamlessly integrated into the original design. Printing Details: Layer Height: 0.2 mm Support used for the outer…
I have designed my own toothbrush case with a snap in closing mechanism. Most of the models which I found online have a very fragile closing mechanism. There are files for multicolor printing, and also for single color, with a cutout…
I created a parametric design of a sliding puzzle and combined it with a stl generated by HueForge. The design was printed on a Ender 3 Pro, with the following settings: up to 7mm with 0.2 mm layer height from 7mm with 0.08 mm layer…
General information: I have deigned this Garage to fit your controller in a cozy place close to Cooler Master QUBE 500, whenever you finish the gaming session. The floor and back panel uses the same holes system fitted on the CM Qube 500…
KlackEnder-Probe for Biqu B1 A modified version of the KlackEnder-Probe specifically designed for the Biqu B1 3D printer. This remix maintains all the reliability of the original design while adding perfect compatibility with the Biqu B1.…
Print the lamp box Start by printing the base and the top cover of the box. I used 0.2 layer height, 65% infill, no supports for the base, but the cover needs supports. Print the faces I printed the faces using white PLA, at 215/60. layer…
To wszystkie aktualnie dostępne wyniki.
