P
PrintablesFraughst
Wood Grain printable
Works best when scaled up larger so the textures are more easily printable
- Pobrania
- 552
- Polubienia
- 39
- Ocena
- 0
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesFraughst
Fall Leaves Hangable
This is a remix of ToolsToMars "Fall Leaf Decorations" model.
- Pobrania
- 257
- Polubienia
- 25
- Ocena
- 0
P
PrintablesFraughst
PS3 Slim Wall Mounting Brackets
Brackets to secure a PS3 slim to a wall with screws.
- Pobrania
- 185
- Polubienia
- 15
- Ocena
- 5
P
PrintablesFraughst
K1 Max Left Side Mounted Tool Holder (Remix)
I have spools mounted on the left side of the K1 Max that interfere with the original design placement.
- Pobrania
- 135
- Polubienia
- 18
- Ocena
- 0
P
PrintablesFraughst
3D Scanning Pyramid
Print with the base of the pyramid on the build plate, no supports required. You'll have to add your own locating dot stickers.
- Pobrania
- 126
- Polubienia
- 10
- Ocena
- 0
P
PrintablesFraughst
Clay Forming Rib
This object is quite large and won't be able to lay flat on some standard sized print beds.
- Pobrania
- 117
- Polubienia
- 40
- Ocena
- 5
P
PrintablesFraughst
4 Inch "L" Bracket
The chamfer on the rear of the bracket is for an alternate printing orientation that better optimizes the layer lines for the forces a bracket may receive.
- Pobrania
- 112
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFraughst
PS1 Classic Wall Mount Bracket
These brackets were designed to mount a Classic Playstation to the wall and use it.
- Pobrania
- 106
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFraughst
26mm or 1 inch wire racking shelf sleeve
Place on build plate with the largest part of the taper facing down. Supports required for locking features. print two per pole, 8 needed per wire rack shelf.
- Pobrania
- 105
- Polubienia
- 14
- Ocena
- 5
P
PrintablesFraughst
Qidi X-Max 3 Vented Lid Riser
Support material required due to the locking dovetail interface, also recommended in the vent slots but may not be necessary. Print 1 each of the risers and slot them together. Print with the risers laid on the build plate standing up as…
- Pobrania
- 105
- Polubienia
- 13
- Ocena
- 0
P
PrintablesFraughst
Electrical Tape Container (3M)
Print with open ends of the containers facing up, the top of the lid and the bottom of the container should be on the build plate. No support required from my experience.
- Pobrania
- 100
- Polubienia
- 16
- Ocena
- 5
P
PrintablesFraughst
Photobox brackets
Print with flat base on build plate, slots facing up.
- Pobrania
- 79
- Polubienia
- 18
- Ocena
- 4,5
P
PrintablesFraughst
Prusa XL 5kg Spool Holder
Split the model in your slicer and place both thread features facing up. Secure base of spool holder to the printer in the desired location using the M4 bolt and nut from the original spool holder. Thread the second portion of the spool…
- Pobrania
- 78
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFraughst
2040 extrusion 2x4 flat bracket
This bracket was designed to help join two pieces 2040 aluminum extrusion together. This fits on the extrusion on the bottom of most open air printers. Print with the flat face of the bracket on the print bed. Model has been reuploaded,…
- Pobrania
- 74
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFraughst
Simple Strength Test
Use a trigger clamp to hold this down at the edge of a table, with the bottom edge butted up against the table.
- Pobrania
- 66
- Polubienia
- 5
- Ocena
- 5
P
PrintablesFraughst
Retraction and Stringing Test
Making the model solid, it only took about 1.5 meters of filament, great test to be able to run out some scrap filament shorts you might have laying around!
- Pobrania
- 57
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
5kg ZYLTech Big Texas Spool Holder
I recommend 10 walls and 55% infill for this spool holder since it'll be carrying 5kg spools. It will almost certainly hold the weight with less structure than that, but I prefer it to be beefy. Print this model laying flat with the legs…
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFraughst
Qidi Tech X-Max 3 Handle Spool Holder
Print with at least 5 walls, as solid as possible is recommended. A larger version to hold more/larger spools is available here: https://www.printables.com/model/1156510-qidi-tech-x-max-3-big-spool-holder
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFraughst
XRP Ribbed Wheel
For use where rubber O-Ring tires might not be suitable (or unavailable)
- Pobrania
- 53
- Polubienia
- 8
- Ocena
- 0
P
PrintablesFraughst
Comgrow T300 Bed Level Test
Model is .2mm tall, and the lines connecting the points are .4mm wide.
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFraughst
Simple Card Sorting Box
I've got a big collection to sort through and modeled these up to help. These should fit even sleeved cards.
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFraughst
Comgrow T300 Spool Rod
Print with flared ends on the print bed. Using a brim is recommended.
- Pobrania
- 41
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFraughst
Comgrow T300 Z Axis Knob
There is room to secure a 6mm timing belt around the knobs to help keep the gantry in sync when the printer is in a powered off state. There are also numbers to help you adjust the sides individually if need be.
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFraughst
Comgrow T300 Spool Holder
This is designed to hold the spool directly over the gantry with a 1" rod or dowel. Threaded rod is also viable.
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFraughst
Scrabble Letter Tray
Made using the official font! Currently working on the letter tiles, will link when completed!
- Pobrania
- 38
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFraughst
Comgrow T300 Cable Bracket
Print with the long face of the bracket on the build plate. No supports required.
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFraughst
Scepter Water Jug Adapter 10mm
Remixed this model to hold a 10mm OD tube for a drip irrigation system on my balcony.
- Pobrania
- 36
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Qidi Tech X-Max 3 Handle Big Spool Holder
Print with at least 5 walls, as solid as possible is recommended. A smaller version designed for 1kg spools is available here: https://www.printables.com/model/1156522-qidi-tech-x-max-3-handle-spool-holder
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 5
P
PrintablesFraughst
Sort Box with Sliding Lid
Remix of Farscape1111's Guild Deck box.
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFraughst
Qidi X-Max 3 Press Fit Tool Holder
A press-fit tool holding solution for the Qidi Tech X-Max 3. Thanks to jrice128 for their work on the tool rack!
- Pobrania
- 29
- Polubienia
- 5
- Ocena
- 5
P
PrintablesFraughst
Z18 Side Mounted Spool Holder
This model will need supports. Print on side.
- Pobrania
- 29
- Polubienia
- 0
- Ocena
- 5
P
PrintablesFraughst
AMD Wraith Fan 120mm Adapter Plate
I was going through a box of unused old computer equipment and decided to strip the fans from some stock AMD Wraith coolers that come with Ryzen processors for other projects. This plate I modeled converts these fans to 120mm fan mounting…
- Pobrania
- 27
- Polubienia
- 8
- Ocena
- 0
P
PrintablesFraughst
Hose Wrapping Support Hook
Attach this to a workbench or table surface to wrap hose or cable around. Scale to fit your needs!
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFraughst
3 Section Sorting Box with Sliding Lid
Print with box and lid bottoms on the build plate.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFraughst
10 Section Sorting Box with Sliding Lid
Print with box bottom and lid bottom touching the build plate. No supports required.
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 5
P
PrintablesFraughst
5 Speed Harbor Freight Bauer Drill Press Fixture Plate
I needed a template of the fixture plate for a Harbor Freight Bauer drill press to model up work-holding solutions.
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFraughst
8 inch Nicholson File Handle
This handle is designed for an 8" Nicholson file. Attaches best if the tail of the file is warmed up before this handle gets pounded on. I recommend at least 3 walls and a decent infill, but print at your own discretion. No supports…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
.25x1 Pin for Pegboard
Don't overthink this one, it's just an inch long peg for a 1/4 inch holed pegboard. Category: Organization
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFraughst
FJ Cruiser Door Mounted Armrest
I'll include a link to the product I intend to mount to this platform once it arrives and I test for fitment.
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFraughst
Bracket for Schunk APS-Z80 Proximity Sensor
This was designed to replace an existing magnetic proximity sensor bracket that the recessed nut stripped out of which caused the proximity sensor to begin slowly backing itself out of position. This small print needs supports to keep the…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
8.75" Frame for Hueforge prints
Found a Hueforge print that I liked, but I didn't have a frame for it. This is just a simple frame so I can hang it.
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Guild Deck Box (Magnet Remix)
Remix of Farscape1111's 'Guild Deck box" design using two 5x2mm magnets inserted after printing to secure the lid.
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Order 66 Stencil
This is a stencil I commissioned for the Supreme Chancellor. Dimensions are [3" x 1" x .125"] . Scale as needed.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFraughst
FJ Cruiser Speaker Grille Mount
Thanks to 1D_Design for their work on the original model!
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFraughst
Toilet cleaner tablet stand
Scale based on tab diameter. 1.45" diameter at 100% scale. Print with flat base on build plate.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Acer Monitor Hook
Acer B226HQL . Gap is .740", the thickness of the bezel of the monitor this was modeled to fit is about .735". Mounting supports hang down .500", this will interfere with the screen on monitors with a thin bezel. AcerB226HQL. Hook is…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Caulk tube adapter
I bought the wrong size silicone tube to use with my tool, so I made an adapter to make it work.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFraughst
.25" Tumbler Medium test
Created this to test out the viability of using leftover filament as polishing medium in a vibratory bowl or tumbler.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Big Comfy Rotary Knob (Featuring Light Pass-Through)
This should fit most printers that have a rotary knob control. Tested on Creality CR-30, Kingroon KP3SPro V2, Sovol SV01, Prusa Mk4, Prusa XL.
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFraughst
Micropick Stand for Pegboard
This was designed to be mounted to a pegboard (specifically my hexagonal pegboards, but any standard pegboard should suffice). Holes for the pick handles are .200" in diameter with a small tolerance built in. They're also 1.9" deep. Holes…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFraughst
Grout Gun Adapter...Adapter
These nozzles slip onto the larger nozzle. I.D. is .490", it should be a snug fit but not difficult to remove or install. Available in 1/8" and 1/16" outputs
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Road with 10mm connection Pins
Remix of "road" by lord_fred to make assembly a little easier
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
Headphone Holder Clamp with Backstop
I needed a dual-purpose headphone holder and desk backstop to keep books from sliding off.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFraughst
LACK leg brace
Made to be used i n conjunction with a bracket to brace the legs of a LACK table to prevent wobble.
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.