Liczymy pasujące modele…
RC work stand for 1/10 rc cars, based on a bearing 15x35x11 Base V2 does include shocks support, for shock cylinders up to 16.5 mm external diameter. Holes have been included in case oil is going into the support to ease the evacuation of…
Nichimo Luminous and Cosmo Shooter plastic parts This is the set of plastic parts to repair those Nichimo cars. You need to have a Luminous or a Cosmo Shooter to use those parts as no model are provided for shocks, metal parts or motor…
I modeled the Marui Big Bear tire as close of it I could make it... When looking to print it I scratched my head : no way to print it without supports, and supports in TPU are quite are not going to help the tire is big, so no way it…
After the Spirit FF, I had the chance to get my hands on the Nichimo Midships thanks to my Australian friend Jason alias Bormac. I modeled the car, and you will find the stl of the plastic parts for this car in this publication. I also…
Beside my work to reproduce some tires for the Big Bear, I had an urgent need for tires for an experience on a track with some refined gearbox. A tire easy to find is the Lunchbox tire, but the orignal Big Bear tires are larger, so you…
I modeled my Bearcat SS and decided to provide the files for plastic parts so one can repair and revive a broken car. No files are providen for shocks or metal parts. ** EDIT : forgot to precise that Hirobo original screws are conical.…
***My Marui Samurais have either no wheels or wheels in bad conditions. I had to do something.*** * Please note that this was a massive work to get here, and do not forget to feedback or tip me for the work :-), Thanks! * * My criterias…
The Marui Ninja 1/10 rc car has one characteristic it shares with the Marui Samurai : front and rear rims are not with the same diameter, making it difficult to find harmonized tires configurations working with both front and rear. I…
I designed this to add front lights to my Tamiya Super Hotshot. This is remixed from a front suspension brace by rcXmartin, and the intention is to use led light buckets from Tamiya hop up 54972 or any similar led light buckets Fixed with…
There is things that disturbed me in the layout of this car: the chain rubbing on the radio plate the risk of the ESC power plug going to mess with the chain in the case you use Lipo battery, the risk of having the balance connector…
I got one of my Samurai without a wing. I decided to model it to print it in Nylon PA12 using SLS process, expecting it to be more robust than a lexan wing Category: R/C Vehicles
I can't stand a vintage rc car without driver figure. The layout of the Kyosho Tomahawk re-release is supposed to take the ESC on top of the upper deck under the driver figure, but with most modern ESC it turns to be a problem as there is…
I designed this part for the rear end of my Kyosho Turbo Scorpion. It should work with Tomahawk, Beetle and Scorpion as well. Red Led lights are 5mm standard leds License plate is 30*15mm and comes from Tamico shop Part is fixed using a…
My Shogun don't have its battery door, and I have a Ninja. I modeled the Ninja door, and from there modeled the Shogun doors. Both can be used on both cars. It is also working for the T-Bird Coors using the same chassis Category: R/C…
I had difficulties measuring distance between holes with my caliper, specially when holes where not positioned at the same height or if there is things preventing to place the caliper without any parallax issue... I designed this simple…
I did not have the bumper with my Shogun, but the Ninja had it. Modeled it. Also appliable for the T-Bird Coors Untested at this stage Category: R/C Vehicles
While building my Turbo Optima, I broke two of the sway bar attachments (OTW102.1 and OTW102.2). I designed parts to temporarily replace them awaiting for replacement parts. As the steering connecting rod (OT203.8) is of the same…
I designed this part to be able to add Light to my Kyosho Javelin. It should work as well with Optima and Turbo Optima (at least for the rear) re-release models. I designed a different version of the front for the Turbo Optima to fit with…
Wanted to hide the 540 silver can, and created this motor cover. There is room for the wires. You need to use 2 M3x8 screws. The two parts are supposed to be printed with the contact face on the printer bed. No support is needed. Please…
I have a friend who got his Marui Thunderbird Coors with shocks without the piston parts. I decided to help him with this part modeled as per the original part. I set 3 different versions to allow different damping settings... Category:…
Among my multiple Marui SuperWheelie and Big Bear chassis, a lot of them have rear bodymount issues and bumper fixation issues I designed some quick fixes I printed : for rear body mounts (in repair and reinforcement versions) : they can…
I designed this parts to reinforce my Marui Hunter chassis: the shock towers are known to be one of the weak point. I took measurements, and designed this in order to allow partitions of the forces. The first part is a simple link between…
Designed led holders for the Kyosho Fantom Two parts, to be installed on the chassis. The bodyshell needs to be painted with masks for the lights glass (no design yet - will add something once I will have done the paintjob :-) ) The parts…
I bought a Samurai, and it was coming with an Electronic Speed controller, and it was glued on the battery pack. This is not practical at all when you have multiple batteries. I decided to find a better solution. As it replace the…
One guy at the club at this car and searched for replacement of Front suspension arms for years without finding one. At the end, he gave me a sample, and I designed a part for this. The design is different at it is plain arm, but the…
I built a few Kyosho legendary series kit, and one step is always difficult. Last time, I did not thought about this, but it's always hard to put the shock gaskets in place, and sometimes you break one. This is my own attempt to solve the…
The Marui 4WD chassis used for Ninja, Thunderbird Coors and Shogun requires S30 parts to replace trust washers while using ball bearings. The part is on the servo saver cluster, and among the chassis I got, none came with the unused parts…
the instruction manual of a Marui Samurai says that if you replace tenac bearings in the knuckles and rear arms by ball bearings, you should use the spacer E-38. My samurai did not came with the unused parts from the build. I had to…
I had a few parts missing on my Samurai. In particular, the D_collar as figured on the instruction manual was missing, so I created a part to do the work. I also took inspiration of it to get some for the rear shock mounts, but added a…
I designed this ring to put inside Kyosho legendary series Scorpion rear tyres and use them with Marui Hunter and Galaxy rims: the ring will be locked laterally by the two parts of the rim, and will lock the tyre against the half rims.…
None of the Galaxy or Galaxy RS I got was having its wing. I decided to try to find a solution to the problem, which result in broken wing at the first roll over. The principle is quite simple: a support that goes on the roll cage and…
Servo mount for Marui Hunter/Galaxy/Galaxy RS Category: R/C Vehicles
Designed those parts initially to reinforce the tubes used to mount the Rear Bumper and Gearbox cover at the rear end of the Hunter chassis. Since the first parts did not integrate well with the rest of the chassis design, I decided to…
My Marui Samurai did not come with its Speed controller support. I needed one to put my wireless MSC to make my Samurai more vintage look alike... Category: R/C Vehicles
When I disassembled the front differential of my Marui Samurai, I had to use a paper clip folded to remove the bevel gear, and it took a while. I designed this tool to ease the extraction. It goes around the bevel gear, and enters in the…
Simple parts designed to refix a wing while the holes on the wing and the bodyshell have been damaged V2: Review as the nut recess was slightly too small. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes…
Designed this to reinforce the front body mount support in the Marui Hunter/Galaxy chassis, as it happens this one breaks. Simple fix, glue the broken part and put the printed part around. You may even fill to replace the broken part if…
I designed this part to fill in the space around the tubes used to fix the motor mount on the Marui Hunter/Galaxy chassis, as those tube tend to break. It may used as well for broken tubes, as you put the part in, fill the broken tube…
Marui Samurai G55 spacer Category: R/C Vehicles
Leds holder designed for Hirobo Bearcat SS designed for thos cheap led buckets you can find on aliexpress, ebay or amazon. Printed fronts in TPU (but PETG is fine as well as the part won't be too much exposed) and rear in ABS. All printed…
To wszystkie aktualnie dostępne wyniki.
