P
Printablesn9dmt
Shelf
Small shelf that can be screwed to a wall. You know, to hold stuff. Originally designed to hold a Sennheiser EPOS base. Category: Organization
- Pobrania
- 1846
- Polubienia
- 168
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printablesn9dmt
2005 Honda Pilot Key Fob
I've tried all the other 05 Pilot key fob designs I could find on here, but they've all broken on me. My biggest complaint was that none utilized the 2mm threaded hole in the key "blade" to secure it. My design requires more hardware, but…
- Pobrania
- 382
- Polubienia
- 46
- Ocena
- 5
P
Printablesn9dmt
QRP 40M EFHW Reel Style Housing
Overview This design combines the functionality of both a transformer housing and wire winder into a convenient package that is both easy to deploy and store. It is sized to hold an FT140-43 toroid and approximately 67ft of 18AWG wire,…
- Pobrania
- 319
- Polubienia
- 51
- Ocena
- 5
P
Printablesn9dmt
UniFi G3/G4 Bullet Camera Base Mount
Overview A friend of mine was getting these UniFi G3/G4 bullet cameras returned from remote sites without the bases, and unfortunately, Ubiquiti doesn't sell the mount as a standalone piece. If you're going to be installing these outside,…
- Pobrania
- 301
- Polubienia
- 21
- Ocena
- 5
P
Printablesn9dmt
ATX PSU Mounting Bracket v1.1
v1.1 Update Fixed hole caused by ribs not being fully extended. Should improve print time. -Thanks @kaizoor_940459 ! A bracket designed to mount an ATX power supply to the underside of a bench/table/any other surface. Designed to work…
- Pobrania
- 227
- Polubienia
- 15
- Ocena
- 5
P
Printablesn9dmt
Private Property/No Trespassing Sign
A “Private Property No Trespassing” sign. Works well when printed in white and gone over with red permanent marker. You could also do a color change during the print to get the raised letters and borders to be a different color.
- Pobrania
- 212
- Polubienia
- 9
- Ocena
- 0
P
Printablesn9dmt
1.5in PVC Floor Flange
A floor flange for 1.5in PVC pipe. Designed to be used with M4 hardware. Support ring included - I used this flange for a mushroom grow tent, so having a backing ring was helpful.
- Pobrania
- 208
- Polubienia
- 24
- Ocena
- 0
P
Printablesn9dmt
Arrow Antenna Holder AKA The Quiver v1.0.1
Credit to Zanzibar_T_Cricket on Reddit for the awesome name. Updated June 8, 2025: Based on some feedback from @JammerX19 , I've added some labels to indicate where the driven element for each band should be located. For 2 meters, this…
- Pobrania
- 194
- Polubienia
- 47
- Ocena
- 4
P
Printablesn9dmt
Ratchet Strap Winder
A simple, flat print to help keep ratchet straps organized and not in a big nest. I start with the hook through the hole then wrap tightly around, putting the loose end into the slots on the side (in one, back through the other). Other…
- Pobrania
- 140
- Polubienia
- 38
- Ocena
- 5
P
Printablesn9dmt
QRP Balun Housing
Overview This is a QRP balun housing I've been working on. It's nothing new in terms of what it can do, but it's a nice, compact package that requires only minimal hardware and is easy to assemble. I'm planning to use this in conjunction…
- Pobrania
- 131
- Polubienia
- 22
- Ocena
- 0
P
Printablesn9dmt
120mm Fan Filter Housing
A filter housing for a 120mm PC fan. I'm planning on using this as part of a solder fume extractor system that I'm going to build into my workbench. Could be used for various purposes depending on the filter chosen. I used Polyfil, which…
- Pobrania
- 128
- Polubienia
- 21
- Ocena
- 5
P
Printablesn9dmt
Flange for 4in HVAC Hose
A flange for 4in HVAC hose commonly found in hydroponic systems. Mounting screws are spaced to fit 120mm PC fans.
- Pobrania
- 117
- Polubienia
- 15
- Ocena
- 5
P
Printablesn9dmt
Tree of Life NFC Keychain
A keychain designed to house a 1in NFC tag featuring a design of the Tree of Life.
- Pobrania
- 107
- Polubienia
- 13
- Ocena
- 0
P
Printablesn9dmt
Saw Vacuum Adapter
Overview A simple adapter to allow a vacuum hose with approximately 2.25in OD to be used with a saw having a vacuum output of approximately 1.5in OD. The inside walls are tapered slightly to provide a snug fit. Category: Parts
- Pobrania
- 101
- Polubienia
- 13
- Ocena
- 5
P
Printablesn9dmt
Wemos D1 Environmental Monitor
The following is largely a copy/paste job from my GitLab page . The instructions on Thingiverse should take you through the basic setup. For more information, including the Helm chart to deploy data collection and visualization, check out…
- Pobrania
- 98
- Polubienia
- 16
- Ocena
- 5
P
Printablesn9dmt
EMT Conduit Filament Storage Shelf v1.1
v1.1 Update: I've added a tab at the top of the bracket for an additional screw. After using the shelf fully loaded for a while, I noticed it was pulling away from the wall at the top. I've been using the new design for a while without…
- Pobrania
- 87
- Polubienia
- 20
- Ocena
- 4
P
Printablesn9dmt
Mini Excavator Water Bottle Holder
A water bottle holder designed to hold a Nalgene water bottle and fit around a ~32mm tube. Requires: M3 heat nuts @ 5mm in diameter x 4mm tall (x4) M3x25 screws (x4) 4 M3 washers (x4) Print both parts. The heat nuts go in the main body.…
- Pobrania
- 82
- Polubienia
- 10
- Ocena
- 0
P
Printablesn9dmt
Combination Wrench Holder (11 Wrenches)
A simple holder for 11 combination wrenches. Designed around an old Performax set.
- Pobrania
- 81
- Polubienia
- 10
- Ocena
- 0
P
Printablesn9dmt
Boom Arm Mount
A screw-down mount for lights, mics, magnifiers, etc on boom arms. If the included clamp isn't large enough to accommodate the edge of your desk, this can be screwed down on a right angle to provide a place to mount the boom arm. Hole…
- Pobrania
- 72
- Polubienia
- 17
- Ocena
- 0
P
Printablesn9dmt
4in HVAC Hose Hanger
A U-shaped bracket I created to hang 4in HVAC hose from floor joists. Use 2 nails driven at a downward angle to mount the bracket; this will keep it secure while still being easy to remove for maintenance if necessary.
- Pobrania
- 60
- Polubienia
- 16
- Ocena
- 5
P
Printablesn9dmt
Tape Holder Bracket
A bracket that can be used to create a tape shelf using 1/2in wood dowels. It's similar to some other designs, but I wanted one that printed completely flat and would support 1/2in dowels. I would recommend pushing the dowels through the…
- Pobrania
- 54
- Polubienia
- 10
- Ocena
- 5
P
Printablesn9dmt
Panel Mount XT60 Side Mount Housing
A simple holder for an XT60 connector that can be mounted to something with a single screw. Cap allows for wire passthrough and should snap together with the body.
- Pobrania
- 53
- Polubienia
- 7
- Ocena
- 0
P
Printablesn9dmt
QRP Reel Antenna for 20M
Description This is a (likely over-engineered) QRP antenna system I've been working on for a while. The goal was to have something that was easy to deploy/pack and was somewhat self-contained. The design does not include a balun, but I…
- Pobrania
- 53
- Polubienia
- 28
- Ocena
- 0
P
Printablesn9dmt
Attachment/Tie Down Point
A simple attachment/tie down point that can be secured to a surface with 2 #8 wood screws. I originally designed it intending to use hook and loop cable wrap to secure things to it, but I have yet to do that since I've found so many other…
- Pobrania
- 52
- Polubienia
- 7
- Ocena
- 5
P
Printablesn9dmt
Fiskars Multipurpose Snips Pegboard Holder
A pegboard holder for Fiskars multipurpose snips
- Pobrania
- 48
- Polubienia
- 8
- Ocena
- 5
P
Printablesn9dmt
BNC/SMA Adapter Spacer
A spacer for BNC/SMA adapters to improve the look. Sized for use with a Nagoya NA-771, but will likely work with other antennas.
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
Printablesn9dmt
Pegboard Isopropyl/Q-Tip Holder
A pegboard holder for a 16oz (473ml) rectangular bottle of isopropyl alcohol and some q-tips.
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
Printablesn9dmt
Jackite 31' Basecamp Mast System
Update: February 1, 2023 This mast system was used for Winter Field Day 2023 and held up great in Wisconsin winter weather (printed in PETG). No changes are planned at this time, but if you run into any issues using this, please comment…
- Pobrania
- 44
- Polubienia
- 9
- Ocena
- 0
P
Printablesn9dmt
Screw Fastening Cable Grommet for 1in Hole
This cable grommet fits a 1in drilled hole and will accommodate a thickness of a couple mm. I created it to use with a fogger system I'm building that is part of mushroom grow tent. This grommet allows the power cable for the fogger to…
- Pobrania
- 43
- Polubienia
- 8
- Ocena
- 0
P
Printablesn9dmt
Bat Chainsaw Pull Handle
Motor start pull handle shaped like a bat
- Pobrania
- 41
- Polubienia
- 11
- Ocena
- 0
P
Printablesn9dmt
Pegboard Spray Bottle Holder
Another one for the pegboard collection. This works with these spray bottles (and probably others)
- Pobrania
- 38
- Polubienia
- 10
- Ocena
- 0
P
Printablesn9dmt
Bracket for 1/2in PVC Pipe
I'm building an outdoor shower and needed some brackets in order to create a curved shower curtain rod using 1/2in PVC. Secures with 4 screws and holds the PVC relatively tight, but it can slide through the bracket with enough force.
- Pobrania
- 37
- Polubienia
- 17
- Ocena
- 0
P
Printablesn9dmt
Ender3 Screen Surface Mount
I wanted to cleanly mount my Ender3 screen/control knob flat on a surface for top-down viewing. This design accomplishes that task. The screen gets mounted into the main body, while the clip gets mounted to a surface using #6 wood screws.…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 5
P
Printablesn9dmt
Scalpel Blades Pegboard Holder (1in pegboard)
A pegboard holder for boxes of scalpel blades that allows for easy dispensing.
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
Printablesn9dmt
NodeMCU Plant Monitor Housing
This model is a case I designed to hold the components for a plant monitoring device I created using a NodeMCU. For code, parts list, and wiring diagram, please see my Gitlab page .
- Pobrania
- 31
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Solar Meshtastic Node
Solar Meshtastic Node Non-Printed Parts List RAKwireless WisBlock Meshtastic Starter Kit US915 Base RAK19007 + Core RAK4631 915MHz LoRa Antenna 3.7V 2000mAh Lipo Rechargeable Battery Pack Micro Solar Panels (x2) Micro ZH 1.5 2-Pin JST…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
Printablesn9dmt
Bench Power Label Plates
Screw down label plates for bench power. Countersunk holes for #8 wood screws. If there's a voltage you'd like, please let me know.
- Pobrania
- 30
- Polubienia
- 9
- Ocena
- 0
P
Printablesn9dmt
Temp/Humidity Sensor Pole Mount
A simple mount for temp/humidity sensors commonly found online. It prints in two parts: a clip for ~16mm diameter poles (commonly used in cheap greenhouses), and a sensor holder, into which you can clip the actual sensor. Either of the 2…
- Pobrania
- 28
- Polubienia
- 6
- Ocena
- 5
P
Printablesn9dmt
NATO Phonetic Alphabet Chart
I'm running the Ham Radio Ward at Cyphercon 2026, and I needed to display the NATO phonetic alphabet for our Get on the Air station, so I printed this to match the con color scheme.
- Pobrania
- 27
- Polubienia
- 8
- Ocena
- 0
P
Printablesn9dmt
DON'T PANIC Badge
Pretty straightforward - a badge/label that says DON'T PANIC, like from The Hitchhiker's Guide to the Galaxy.
- Pobrania
- 26
- Polubienia
- 7
- Ocena
- 0
P
Printablesn9dmt
Water Resistant Container
This is a water-resistant container I originally designed to hold paper clues for a treasure hunt. The container does well in rain, but not when submerged. Uses a 20mmx3mm o-ring.
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
Printablesn9dmt
Anytone Mic Button Hanger Conversion
A quick print to convert your Anytone mic (at least the one on the 778UV; I'm not sure how others are) from the hook style hanger to the button style like Yeasu and other use. This uses the original mic hardware. f3d file is included if…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
Printablesn9dmt
LED Work Light Mounting Clip
I needed a way to mount these lights from Amazon across the exposed floor joists in my basement since the mount points don't line up with the spacing of the joists. The mount works great, just screw it in and clip in the lights; it should…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
Printablesn9dmt
Neighbors Welcome Sign
A sign to let your neighbors know they're welcome.
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Soft Faced Hammer Holder
A screw-mounted holder for double sided-soft faced hammers/mallets.
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
Printablesn9dmt
LED Remote Caddy
I recently found myself with a lot of similar remotes for various RGB LED strips and other lights that I have, and I needed somewhere to keep them. This caddy holds 8 remotes and 6 CR2025 batteries. Print Settings Printer Brand: Creality…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
DIY Watering Can Spout
Designed to fit a Blue Diamond almond milk cap, but should work for any cap that's ~42mm in diameter or smaller. To assemble, drill as big a hole in the cap of the jug as you can while keeping the threads intact. Next, epoxy the spout…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
BNC Antenna Holder
A floating BNC antenna holder. Print both parts, screw the wall plate to the wall and slide on the antenna holder after installing 5 BNC connectors.
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
Printablesn9dmt
1/2in NPT Filter
I made this to go on a spigot that is used on a spring dam. Behind the dam is filled with clear gravel, so this keeps the spigot from getting clogged. Sorry, I forgot to take a picture after install and before filling with gravel! Holes…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Pegboard NanoVNA Holder
Overview Not exactly a remix, but it is designed based on the size of the awesome NanoVNA case by Hagster . Just a simple box to hold your NanoVNA on 1in pegboard. Category: Organization
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
Printablesn9dmt
Ignition Coil Tester Pegboard Holder
A pegboard holder for an ignition coil test tool. Designed for this one from Amazon, but may fit others: https://www.amazon.com/gp/product/B09FJSZD2H
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
EFHW Antenna Transformer Housing
A housing for an EFHW antenna that fits a single 240 toroid. Designed to accommodate multiple mounting options as well as a built-in shroud to divert rain/water away from the coax connection. Requires M3 heat insert nuts (x7) and various…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Wire Winder
A wire winder designed for ham radio antennas. Print just the main body for a simple winder or add the optional rounders to keep the sharp bends out of your wire and extend it's life. The XL wire rounder can be added to increase overall…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
Printablesn9dmt
1in PVC Mast Support
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
Printablesn9dmt
AMTIFO OBDII Code Reader Pegboard Holder
A pegboard holder for the AMTIFO OBDII Code Reader. Print with supports. Yes, I definitely should have dried my filament before this print! Designed for this one from Amazon, but may fit others: https://www.amazon.com/gp/product/B09TQCLDCZ
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
223 Snap Cap Holder (x5)
A holder for 5 223 snap caps/rounds. Has space for 2x16mm round magnets (x3)
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
DC Probe Pegboard Holder
A pegboard holder for a DC probe tool. Modeled around the dimensions of this one from Amazon: https://www.amazon.com/dp/B0CHJHW2XD
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Pickle Fork Kit Label
A label to attach to the box of a pickle fork kit. Designed to fit this one - https://www.amazon.com/dp/B08H8JJ122
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
.308 Laser Boresight Case
A small, friction-fit case for a .308 Winchester boresight and 6 LR41 batteries. Label is printed separately to avoid needing supports for the lid - attach with your choice of adhesive.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
9mm Magnetic Snap Cap Holder (x5)
A holder for 5 9mm snap caps. Has space for 2x12 round magnets (x3)
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
1/2in PVC Rod Hanger
Hangers to turn a 1/2in PVC pipe into a closet rod. One open end, one closed.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Mason Jar Light
I'm currently learning to darn socks, and I saw it suggested somewhere to stretch the sock over a mason jar rather than use a darning mushroom. I liked this, but thought it could be improved by adding a light to the inside of the jar to…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Compression Test Kit Label
A label you can epoxy to a compression test kit case. Designed to fit this one - https://www.amazon.com/dp/B0BQC7K4LJ
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Clutch Alignment Tool Label
A label for a clutch alignment tool box. Designed to fit this one - https://www.amazon.com/dp/B093BPLXFX
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Terraform Associate Magnet
Requires 10mm x 2mm magnets (x3). I usually melt my magnets in with a soldering iron, so the holes are somewhat undersized. F3d file is included if you want to modify.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Dell Laptop/Dock Power Brick Mount
Just something I whipped up to help clean up under my desk. FreeCAD file included so you can adjust to your needs.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablesn9dmt
Torx Sockets Label
A label for a box of torx sockets. https://www.amazon.com/dp/B0CTWMXYDC?ref=ppx
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Plastic Welder Holder
Uses 2 screws to attach to a surface. Designed for the plastic welder to sit with the handle down but can work the other way.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Hexagon Dish
Originally designed to hold belts, these have also found use as catch-all dishes in my toolbox. FreeCAD file included.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
Plant Labels
Various herb and vegetable labels for your garden. Blank template included. Current list: Basil Beans Beets Better Belle Birds Eye Chili Black Krim Boston Pickling Broccoli Brussels Sprouts Carrots Cayenne Cherokee Purple Chives Chocolate…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
40mm Extrusion Stabilizer Bracket
A bracket for 40mm extrusion. I made this to be able to screw my Ender 3 down to the table.
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
Printablesn9dmt
2in PVC Gutter Cleaner Parts
Parts that can be used to assemble a vacuum attachment for cleaning gutters from the ground using 2in PVC pipe.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printablesn9dmt
XT60 and Button Grommet for 1.5in Hole
A part to hold an XT60 panel mount connector and a push button (I use as a reset button) in a 1.5in hole. Push button hole is 7.5mm in diameter.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.