Liczymy pasujące modele…
This is my Beyblade geared Speed launcher. You will need some add. parts and a beyblade clutch. I took mine from an old Beyblade starter, since the printed one mostly don't last long (not even 5 starts). Just glue the clutch to the round…
Hi all, as my son is a big fan of Fireman Sam, i wanted to print him a Fog Nozzle as Sam is using it ;-) I used the nice design of pocsag and deleted the lever because it should be able to use the lever and of course the design is…
just a simple add-on part to improve the fit of the phone.
Hi, wanted to print the Flexi-Trex for the backpack of my little son. I only added the hole for the keyring, and scaled in in Cura to 60%. Works well and fits the backpack perfectly. Thanks to Benchy4Life for this great design!
my first remix i designed and printed... may be not perfect in the inner... but who cares :) I need a double stand because we have two brushes and i don't want to have two single stands. Also text (e.g. names) is applicable. First try…
My sodastream got broke... i think this might be the most frequent reason. You can find this problem with the broken plate for the locking pin, everywhere in the internet. Ok... got a printer, so i can print a new lever... but why…
Additional parts to this design: https://www.thingiverse.com/thing:4739055 E27 remixed from existing parts. Have fun!
Thanks for the original design! Needed a small box with a switch, so i did this remix! Fits perfectly!
Hi, I was sick of using LiPo Packs for my Dji FPV Google so I build a 3S Li-Lion Battery Pack in a printed PETG housing, to wear it on a belt or trousers. Add. Parts 3x M3 Screws 20mm 3S Balancer XT (what ever you need, in my case XT60) I…
Hi all, I wanted to easily open the enclosre for PLA etc. printing. Since I'm unsing an AMS, it's not possible to lift the topplate. Leaving the front door open, is also not an option. So I design this small frame which will perfectly fit…
Wie schon so oft, ist der Siphon undicht und natürlich passiert es am späten Abend. Bei der Demontage fällt schließlich auf das sich das Anschlussrohr bzw. der obere Kragen aufgelöst hat und einmal demontiert kriegt man es nicht mehr…
Dear all, please see the instructions at https://www.verdrahtet.info/2019/01/04/homematic-statusanzeige-selbst-genaut/ Thanks to Stefan for this project. There will be some options: with switch / without switch (already here) version with…
I liked the original design a lot, but I prefered to have a case where I can put all my things in... So I created that remix. It will have enough space to fit a small BetaFPV Lipo Checker... of course you can use it for sth. else too,…
This is a simple tool to fix your FritzBox7560 under a table. You will need 2 of them. I'm using the version without holes, but there is a second version with 5mm holes. You may turn two additional pieces by 180 degree, and you will have…
This is a full body case for the cheap spot welder: NOTE: There are several similar PCB out there. remix: https://www.thingiverse.com/thing:4729031 by atunguyd I'm using the spot welder with a 3S 2200mAh 50C Lipo! It contains: Bottom Top…
Hi, this is a simple stand for a Hoymiles HM-1500 micro frequency converter. Mainly designed to keep it in place on a flat roof, under the Panels. You will need: 2pc. M5 threat inserts 2pc. M5 Screw 20mm 2pc. washer The connector is…
Hi all, mainly designed to fit my Feiyue Fy08 since I'm using it on 3S Lipo and I don't want to destroy my lipo. Fits perfectly with my 3S 2200mAh into the lipo bay. To use it with a Socket just desolder the pin strip and solder a socket.…
Hi, inspired by the design of Josef Müller! ( Velux Solar Panel Frame von Josef Müller | Kostenloses STL-Modell herunterladen | Printables.com ) Due to the fact that my Anycubic's build plate is not big enough and I want to be sure that…
I created a Powerbank for 18650 Liion. Most parts are recycled parts: 3x 18650 Liion (in my case 2400mAh) 1x step up module 5V 1x connector cable (in my case a micro usb) 3x M3x20 screws The cell package is spot welded. See my Spotwelder…
Inspired by serveral Designs. This is just a simple Go2 mount for my Cinelog25. May fit other models to, due to the simple fixing.
Since I'm using a QX7, I wanted to have a charge block which fits all my needs. So I've done this remix. Thanks for the original design. I also changed the bottom of the block, to make it easier for soldering. Have fun!
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
UPDATE: Adapter for 120mm hose! I needed a adapter for the exhaust air hose of our aircondition, because we have insect mesh in front of our windows. So i decided to create this simple adapter which will be pushed between the window frame…
Added a cap for the H7 bulb, to prevent it from damage! Added two versions with a slot for a voltmeter. Links below! I used this H7 car bulb for some months as LiPo Discharger or Killer. Since it works pretty well I decided to design a…
Needed an antenna mount, due to the fact that I was not able to get the long Antenna or an extension. So I designed this little mount. You will need a hole for the Antenna cable and two holes for the guide pins. Glue them to the case,…
Hi, this is a small little helper to easily control 4 devices, which are connceted to Homematic-Actors. You will need: of course an existing Homematic installation 1x HM-PBI-4-FM 4x momentary switches 6x6x4mm some wires The case is…
Hey, since Zahnheld has nothing to mark your toothbrush to difference between 2 or more brushes, I designed this simple marker. It is 0.6mm thick and can easily be placed between the brush and the main device. Have fun :)
This is a cover for the Adapter, to keep it clean during non-use phase. You may put a slim rope on it, to prevent it from falling down /loosing it. Have fun! Link to the adapter: Umfülladapter Sodastream Quick Connect geeignet für…
Since i wanted to give the noisy fans of my printer a second chance, i decided to create a small handy vac for my little son. So now the fan does, what it was created for... NOISE ;-) Of course, the handy vac, doesn't have a vacuum to…
Originally I just fixed my SLZB-06 with a Powerstrip. Unfortunately it happened a few times that someone just stole it the USB-C Power. So ich found this great design, which was equipped with the Fusion-file and designed a simple theft…
We are using a Philips Avent SCF255 to heat up baba pulp or keep milk warm. Unfortunately there is no cap to close the warmer and prevent it from dust and other dirt, while you don't use it. In the past we used a kitchen towel... With my…
Hi all, the lock of the Rotho diaper bucket got broke, so it's not possible to keep it close... not that good ;-) Tried to glue it, but no chance... good to have a 3D Printer... Print, glue and everything is good again! Have fun!ainers
This is a simple wallmount for the Xiaomi/Atuman TH1 Clock/Thermohygrometer. Just carefully remove the folding stand. The mount is designed to fit a standart Tesa powerstrip. Now the TH1 is easy to remove in case of changing settings or…
To wszystkie aktualnie dostępne wyniki.
