Liczymy pasujące modele…
Printable quick release latch for panels on 2020 extrusion This is originally inspired by a youtube video - https://www.youtube.com/watch?v=6p7M18oPn3k A recent review video on YouTube by Maple Leaf Makers Another user did a review of the…
After doing the can bus conversion on my Voron I found that the z chain was too close for comfort to the back of the can bus board. To this end I decided to re-use one of the x/y chains to just pass the A/B motor cables up. Obviously,…
Latch for panels on 1515 extrusion This is not an original idea. For information go on history go here Hardware m3x12 Only tested against LDO extrusions, if you're using something else the pins may need to be adjusted (let me know how)…
Needed to bleed my brakes and discovered I didn't have an appropriate bleed block. So just quickly took a few measurements and printed one.
To assemble you'll need 8 (yes 8) m3x40 and the same number of m3 nuts or nylocs. The insert is separate so you could print in a different filament (e.g. TPU) if you want. The plan is to put some foam or another rubber insert in the top…
The CAD is parameterizable but you may need to merge extra latches or adjust the extrusions if you do decide to modify things. I've found that adjusting the parameters for size you have to go into the latch sketch to adjust the height…
This is a badge based on a trace of https://www.thingiverse.com/thing:1549561 I needed to do another badge for a friend's child and the other logos didn't look as nice. So I redid the design in OnShape. I printed it at 50% scale with…
My better half wanted me to make her a pentagram pendant that she could wear. Very simple design and it's a fairly small item only about 26mm across. Instructions Printed in PLA @ 210C with a .35 nozzle and .15 layer height. Because of…
The diffuser from the 15.5mm quarter round led aluminium profile works nicely. Hardware LEDs That's about it
Simple box for d1 mini for WLED The din mount is adapted from Voron Trident - https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_v2_x5.stl - GPLv3 Hardware - m2x10 (din rail) or m3x? fhs - m2x10 (box)…
Vitamins If using threaded pins 5 M5 x 16 1 M5 x 12 ( or 6 M5 x 12) 3 M5 x 45 1 M5 x 35 4 M5 nylock If using through pins 5 M5 x 45 2 M5 x 35 7 M5 nylock Also 1 M10 threaded bar x 200 mm 7 M10 nuts 2 M10 washers Instructions Print the…
Just added a couple of lugs and sockets in the base of three models. Also slightly reprofiled the cut outs to remove the extreme overhang when printing. Added a solid wall and base version for loose bits-n-bobs. Added a solid lid to match…
Just a quick little model to hold my nozzles in my Voron. Use a couple of drop in or roll in nuts and some m3x8 button head screws. 2023-10-29: Added 6 and 8 nozzle variants.
This is far less tasteless than my previous attempt at designing a lampshade. Hence the name. Print it in vase mode and fit to your lamp. You probably don't want to use PLA or PETG for this if you use an incandescent bulb, but hopefully…
Simple spacer for a UK light switch in a few variants. Designed for a Sonoff UK T1 switch but should fit other switches if you check the size first (the opening is 88mm in cad). The CAD has a couple of parameters to tweak if you are so…
y-motor with extra bolt hole that isn't strictly necessary. Print instructions This is a merging of a previous remix and the mk2s design with the endstop. I just like the extra support of another bolt in the motor. Previous design: i3…
Drill through holes rather than modelled (to hopefully increase strength) Use m3 nylocs where possible - not heatsets Remove sensor mount
I needed to move the hinge location on some old ikea cabinets, but those small plastic inserts are impossible to remove without breaking. So a quick bit of cad later and we have something that works perfectly. You may want to print with a…
Modification of mk3s x-ends and z-axis-top for use with TR8 lead screw, endstop block returns, taller nut trap for belt tightening. Print instructions After printing run a 3mm drill slowly through the inside bolt hole, I've reworked the…
Vitamins Fits a GY-291 (not the ones from Adafruit). 2 x m3 heat set insert M3 x D5.0 x L4.0 2 x m3 x 8mm 2 x m3 plastic washers m6 x 12 to solid mount to the block Profit. Results Same printer, tested back to back. The only custom…
y-corner without the bearing cut out, prints easier but can only be used on the side with one bearing. Print instructions Print and go.
The din mount is adapted from Voron 2.4 - https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/VORON2.4/Electronics_Compartment/DIN_Brackets/pcb_din_clip_x3.stl - GPLv3
Adorable "hello cuthlu" coaster. Made on request. The image in public domain from - Hello Cthulhu | Free SVG (Yes, I didn't quite get the colour swap right)
I liked the idea of holding the bolt in place with a simple part but I like my fillets and chamfers. So I redesigned the part to use less plastic and be a bit more finished. Instructions Printed in PLA with .25 layer height, .35 nozzle.…
I wanted a mini t driver for hex screws. So I decided to quickly design one. Instructions Printed with .25 layers .35 nozzle 70% rectilinear infill. Category: DIY
Use 10x2 magnets, 8 of - two in each space.
I was having difficulties tensioning the belts on my i3. So for the y-axis I created a new version of the idler with an integrated tensioner. It was easier for me to just create the design from scratch although if requested I can do an…
Simple design to stabilize the aluminium i3 frame that's not too fussy about the angle and easy to retrofit (just replace the rear threaded bars with longer ones) Instructions I've found I've been seeing quite a lot of wobble on my…
Minimalist mounting brackets for Uno electronics on Shapeoko 2 Instructions In order to mount the electronics of the Shapeoko onto the Y carriage you need an adapter so I decided to make the silliest ones I could (that still work fine).…
To wszystkie aktualnie dostępne wyniki.
