Liczymy pasujące modele…
Hyundai Ioniq 5 dash magnetic glasses holder Printed in two pieces with tenon to join them. I used superglue gell to build mine. Uses two 8 mm x 3 mm magnets OpenSCAD source included for mods and to adjust to your magnet size
Hi Q air wound coil forms. Generates a form with helical spacers to ease even winding. Designed in OpenSCAD, so you can modify for your needed dimensions and turns. Includes feet for attachment and holes for brass screws and nuts for wire…
A simple snap on stand that leans the sBITX V2 back 30 degrees for a better screen view. Created in OpenSCAD so you can easily modify to suit your needs. Place model flat face down to print. I used organic supports on the foot hole. I…
A dust cap and dew shield for the SeeStar 50. Designed in OpenSCAD so you can easily modify it. I printed mine in PETG with a .6 nozzle on my MK3S. You may need to modify OD to fit well depending on your 3D printer and settings.
This is a nanoVNA-H base that holds two BNC/SMA connectors firmly to save SMA life and relieve strain on the nanoVNA. The design is done in OpenSCAD, so it is completely parameteric. The stl files are for a Huygen nanoVNA-H which has a…
Revision V2 I found a stiffer spring that can be used alone and is easier to adjust. It was labeled #7 Compression 1-38 L x 5/16 OD x .041 AWG. With the stiffer spring I managed to break a leg off the handle so I revised the handle,…
sBITX tilt legs for portable operations. Attaches to back to tilt screen back 30 degrees. Folds up when not in use. Folded does not extend beyond heat sink so does not add to the radio depth. Not as sturdy as the sBITX V2/3 stand,…
Several reports indicate that Baader solar film provides better solar images than the solar filter provided by ZWO. Here are two designs for film holders done in OpenScad. They are slightly smaller in od to be easily inserted and removed…
Designed with OpenSCAD and source included to make it easy to modify.
sBITX tilt legs. This version features adjustable tilt angles by adjusting the leg angles. The new feature comes with the price of a larger mount that protrudes out beyond the heat sink. Designed in OpenSCAD so it is easily modified. The…
Top plate with larger opening for air flow and HDMI access. Designed in OpenSCAD and printed with PETG. Useful with active cooling fan https://www.printables.com/model/921214-sbitx-active-cooling-fan
Holds two BNC/binding post connectors for attaching a device for testing with a VNA. Designed in OpenSCAD, so it is completely parametric. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .2 mm Infill: gyroid Filament:…
A plate that holds a quiet 40 mm x 10 mm fan to cool the PI in the sBITx. This plate has sides on the plate that are meant to direct air from right side case vent through fan and out the top and the left side vent. The air flow may also…
A more robust top for the Tiny Tina drone. It is slightly heavier, but I think it survives crashes better than the original. Done in OpenSCAD so you can easily modify it. Print instructions I printed mine in PETG on a MK3.
A simple holder that slips over a QMX+ case to tilt it up that also has a slot to hold a M5stack Tab5 when used as a panadapter. https://github.com/SteffenLav/qmx-panadapter I printed it in PETG with supports. The attached geometry does…
A plate that holds a quiet 50 mm x 50 mm x 10 mm fan to cool the PI in the sBITx. This plate has sides on the plate that are meant to direct air from right side case vent through fan and out the top and the left side vent. The air flow…
A stand for mounting an Elecraft KX3 on a shelf. The SCAD design can be adapted for a KX2 or any rectangular device. 73 KD8CGH Print Settings Printer Brand: Prusa Printer: i3 MK3 Resolution: optimal .15 mm Infill: 25% Category: Electronics
sBitx case models. Includes backs for V2 and V3 and right ends for Pi 4 and Pi 5. Also has an option for two 1" left end fans. Models created in OPENSCAD which is included to mod as you like. m2m3.scad file contains tapered hex holes for…
A fan mount and fan cover for a Newtonian telescope. The plate covers the area around the fan. The cover is held on by 4 small magnets glued onto the corners that attract the fan mount screw heads. Mine is an 80 mm fan mounted on a…
A sunscreen for the KX3 that attaches to the side rails and folds down to protect the display and controls. Designed in OpenSCAD. I printed mine in PETG. Print top and 2 side pieces and put together using 2 M3x8 self tapping screws. Shade…
A Bhatinov mask for the Skywatcher MN190. Modified from Brent Burton's example. Two handles, SCAD parametric design and MN190 stl. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Resolution:…
small cleat for sunfish sailboat designed in OpenSCAD so you can mod for your needs I printed this in carbon reinforced PETG 5 perimeters, 6 top and bottom layers, 50% gyroid fill
A base that securely mounts to the sBITX HF transceiver case that you can mount your CW key or paddle to for portable operation. Also has a hanger for the mic. Designed in OpenSCAD so can be modified. Uses original case screws. Screw…
This is a model of the Perseverance Mars rover 3D printed from NASA data. This is a large and complex model. Although you can find stls at https://nasa3d.arc.nasa.gov/detail/M2020-Model-Rover-STLs512020 , you need to go to…
A detachable sunscreen for the sBitx display for putdoor. The mount also has a handy tab to hand the mic on. I printed mine is PETG-CF to get a dull, less reflective finish. I use this with my sBitx with tilt back legs. Two shade amf…
Tilts TR-45 back 20 degrees to make use easier. Base clips over existing rubber feet. Geometry generated in OpenSCAD. I printed mine in PETG.
An adaptable power supply that can accept 6-36 V in and provide .6 to 36 v out with overcurrent protection and added filtering. Designed in particular for QMX field use. Includes mounts for Anderson Powerpoles. Designed in OPENscad so you…
Case for Pi Pico power/SWR meter using Kits-n-Parts sampling bridge and a 20x4 display. Be careful to select a 3.3 volt display. The Pico 2 ADC is used to sample the bridge forward and reverse voltages. The MicroPython code on the Pico…
An insert in a 1.5" sch 40 PVC tube to hold a HamSci PSWS magnetometer board. Designed in OpenSCAD so it is inherently parameterized. A board is inserted in the holder and the holder inserted in the pipe which is capped and placed in the…
An easily attached sun shade for the KX3. It fits nicely in the bottom of the side compartment of a WindCamp KX3 case with mic and cables on top of it. Designed in OpenSCAD and printed in PETG.
To wszystkie aktualnie dostępne wyniki.
