Liczymy pasujące modele…
Wanted to hang my small parts box from the side of my tool box. I have printed, tested and works well. Print 2 of them, there are other options out there, but I wanted something that was simple to print, and to keep the print minimal.…
My daughter picked up some salt and pepper shakers at the thrift store and they didn't have plugs, so after a few iterations these came out great! I would assume they would work for most that are ceramic of this size \ shape, if you need…
there are 2 options, either of them will cover the single bin, then a dual and quad as well.
Ok, so I put a linear rail on my X axis.... i lost that lil bit of space from the print area due to this as the print head is now + a bit on the Y axis from where it was. The bed "bottoms out" on the Y tensioner that I'm using, so I…
Needed a sliding window lock for my older windows. These are designed to be used with 4mm nut and bolt combo, there is a insert for the nuts to go in. I printed some in PLA and PETG and they both work great at 40% infill
v2 Update - The hole for the probe is a bit wider so it does not have to be drilled at all, also trimmed it up a bit more to lower print time. I was able to use the existing top bolt by using a non nylock nut, but i may update it again to…
My Kraton came with the HR wing hardware, that hardware doesnt work with the TPU wing mount at the following link, https://www.thingiverse.com/thing:4781582 , that thing has been working great. But yea, the HR wing mounts dont work on it…
I got a tinyhawk cheap, i can not get it to bind, so i wanna put a crazybee board in it that i have here...... so here we are :) https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left…
I wanted my antenna mounted down below in the middle away from everything else, this worked out well, you can mount the board in front or back and it can flip to accommodate. I have some with full size T and some with the blue betaFPV…
I got me a ToolkitRC M7 charger, it is quite nice ! No one had made a case for it yet so i mocked something simple up. I use a decent amount of XT30 batteries as well so i put a holder on the front for an XT60 to XT30 adapter, there is…
My son in law has a 95 Del Sol (NICE) in taking the door panels off he broke some of these guys, so modeled one up in tinkercad and works well.
I needed a case for this TPU ND filter holder, https://www.thingiverse.com/thing:4920392 , works really well, i printed mine in PETG.
2 adapter options, taller one is a drop in single. Shorter is for printing 2 and putting one in top and one in bottom. Should fit PINDA v2 size very well. Hope it helps ! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Liked the org version, but wanted it a bit further back to be closer for shorter plugs, moved it 10mm, still lots of clearance on the prop, and the XT60 does not touch the frame. Enjoy! Category: Other
A buddy of mine kept having the issue where when he would flip his RC truck, it would end up eating away the lil spoiler off the back of the bed, so i made this bumper to cover that. I used cut strips of VHB tape to hold it on and that…
Just tryin things that I can print rather then buy, this is working out fairly well, I would not put it on a race rig, but for bashing just fine. Make sure you use something flat to apply equal pressure when setting it.
As soon as i get a SUPERPINDA in I will be ensuring that it works fine with this as well :) No disrespect as I know the creator does not like ABL, but i LOVE PINDA probes, so i had to get it integrated into this design as i now use it on…
This is a mash up of some models from Thingiverse, a com badge that i scaled up and added a hole to. They work great.
Do you like punishing yourself with hacks and mods to get things to do what you want like me ???? Wish you woulda just got those Fatshark Scouts when you had the change......NAWWWW.... So I had gotten some Fatshark Transformers that had a…
Have CineRat, need nice wall mount with name, here ya go ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: eSun PETG Yellow Category: Other
UPDATE: I was not liking having the module on the side of the goggles, so I came up with an adapter that "hangs" on the 2 stock antenna mounts, I printed some antenna caps to hold it down, works very well, file ending in - Front Mount. It…
Have CineRat, need to mount SMA antenna and hold my cap down well, here we go, there is a slight uptilt on the antenna. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 100 Filament:…
Got a TBS Unifi from a buddy, nice gift :) And was using the org design and liked it. So started on this, while working on it remembered I had a LED buzzer combo from an old Storm X2 and popped it in there as well. I need to work on the…
Wanted to have the text reflect my build of a v2.1, also wanted to put an angle under the over hangs to help it print better with out support, turned out really well. Print Settings Printer Brand: Creality Printer: Ender 2 Rafts: No…
Still testing this, it fits fine and all that good stuff but not sure if it helps at all so yea theres that. But I wanted my gopro a bit lower so remixed this from the org mount. Enjoy ! Print Settings Printer Brand: Creality Printer:…
As always I wanted to add a PINDA probe, I started by trying to make a drop in adapter but that was not a very good solution due to not having a good spot for the cable. So I mixed this guy up. Print it the same as the org model, fan down…
Ok so my power switch on my BLX185 went out, i thought i lost the ESC but turns out it was just the switch, I wired up a larger switch to test and the ESC was good. So checked for a replacement and I was not spending around 30$ for one,…
I've broken so many of these in front end crashed even with the bash bar bumper. So here is a TPU one that seems like its gonna hold up great! ARA 320573
To wszystkie aktualnie dostępne wyniki.
