Liczymy pasujące modele…
The magazine base plates will fit original Glock 2-row magazines in “normal size” calibers: 9x19mm, .40 S&W, .357 SIG etc. e.g. for the Glock 17/34/21… I recommend to print them standing upright with a brim and set the slicer to finish…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toilet paper dispenser with a box for wet TP and a drawer for tampons or other toiletries. Improved version.
Wydruk około 14,23 €–17,39 € nettoWstępna wycena jednego wariantu
This is a rope end knob to be used e.g. on the string of a scuba diving BCD/wing (the thingy marked on the image). If you are printing underwater equipment, always use 100% infill and as many perimeters as possible. You probably want it…
Wydruk około 4,71 €–5,76 € nettoWstępna wycena jednego wariantu
I printed mine using a 0.8mm nozzle and 0.4mm layer height and no supports at all, which seems to come out just fine. As you can see, there are some bridges that would probably be of better quality when using supports. I don't care about…
Wydruk około 16,62 €–20,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: I've also uploaded matching lid for the box: https://www.printables.com/model/562960-lid-for-filament-swatch-box Here you can find the matching filament swatches: https://www.printables.com/model/230120-filament-swatch
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The .3mf contains a prepared model. If you are using a different slicer than Prusa Slicer, just split the model in half along the y/z plane and add pegs or similar feature to re-connect the two halves after inserting the cable. On the…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
If you want to have a bicolor print, set the color change at 3.2mm. Choosing PETG is my top recommendation if you plan to use the lugs for the 2mm cable ties. However, PLA is also a viable option. For the best results, consider using a…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've also uploaded matching screw-on clamps (with M3 inserts) , but basically you can use the M3 throughhole to mount the hooks to anything you like.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
Only needs tiny supports for the openings. I've also added a stackable version (v2) which is backwards compatible with v1. Prints in 5h (PLA, HF 0.6mm, 0.4mm layer height) on a Core One. The stackable version takes a bit longer of course…
I recommend to use PETG or hard TPU so the claws are flexible and won't break.
I made this according to a requirements list from my girl friend. ;-) She likes it. Maybe someone else might like it too. You can scale it from 75 to 125% depending on your hair type.
A screw-mountable key board with hooks for up to 6 keys.
Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
Leave some memories to your later self or to the future. Place some letters, coins, gadgets etc. in it and put it in the attic, basement, dry wall or wherever. To make it waterproof, you might want to print a TPU gasket for the lid. I've…
Basically prints without support and brim, but I'd recommend a 5-10mm brim (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality print. Do yourself a favour and use PETG or…
Easy print - no support / brim whatsoever required.
Desktop cannon. Wheels and body can be printed in different colors. Fix the wheels with a hex nut or melt the shafts.
Additionally needed: 1x M3x26 screw, 1x M3 nut, 2x cable tie Feed the cable ties through the holes (as shown) and fasten them around the Olight. In the files section, you can also find models for 25,4mm (1") and 30mm flashlights.
Updated design (v2): improved lid to close tighter added stop to drawer added mounting block
Basically prints without support and brim, but I'd recommend a 5mm brim and organic support for the locking interface (as in the .3mf file). 0.6mm nozzle and 0.25mm layer height is fine, although you might reduce it for a higher quality…
Box that holds up to 12 6/9/12mm cassettes, 7 24mm cassettes, 5 36mm cassettes or any combination. Standalone version.
Print with strong material and not too little infill. A frame full of honey can easily weigh 2kg or more.
This adapter allows you to deflate your (filament) vacuum bags with your Dyson hand vacuum. A 3,5l standard bag can be vacuumized in 10-15s. Please note, that this adapter will only fit v1..v7 models. Some models might also switch off due…
New in V2: changed snap-on lid to an easy-open tray/lid design added lid imprint (Prusa font) removed large overhangs for easier printing New in V3: added V6 style dot markings to easier identify nozzles no dots - 0.25mm 3 dots - 0.4mm 4…
Muzzle brake for airsoft guns. Use the CAD files to adapt the barrel and bore diameter if necessary.
Can be printed in 2 parts simultaneously, so it doesn't need supports.
A NEW AND IMPROVED VERSION (V3) IS AVAILABLE HERE: https://www.printables.com/model/533469-mk4-nextruderv6-nozzle-tray-v3 Updated (enlarged) pocket sizes for the v6 nozzles. Updated the locking lids to function also with PLA. For some…
This is a 10cm tall stand for a Reolink E1 Zoom camera. The cable can be fed in through the hole in the back and fed out through one of the holes in the foot of the stand. Can be printed without support.
A stackable bullet box with a hinged and snap-locked lid. Fits large .45 cal bullets (e.g. .45 Colt/.454 Casull)
To modify the box dimensions, choose “Modify”/“Change Parameters”. Here you can enter your desired inner width, length and height. If you change the width, you'll have to shorten or lengthen the clips, but that's easy - just select the…
I recommend printing it with 3 perimeters and from PETG, PA or composite material. Update: Adjusted tolerances for less tight fit.
Only needs a few supports that can easily be removed without traces. Also I made this model completely parametric. The wall strength, can count, compartment configuration, can diameter, can height etc. can all be adapted easily, in case…
Headset hanger to be mounted to a shelf with 20mm boards. Fixes its vertical position on one of the cupboards.
The tire profile gauge has two scales on the upper side. One is for summer (sun symbol) and one for winter (snowflake symbol) tires. One division equals 1mm, the marks are at 1.6mm (minimum profile depth of summer tires) and 4mm (for…
Print the whole alphabet, delete the characters you don't need or duplicate them as you like. The back hole is a perfect snug fit for a 10mm round magnet. I've used these cheapo magnets, but any 10x2mm magnet will work.…
Holds 12 6/9/12mm cassettes, 7 24mm cassettes, 5 36mm cassettes or any combination. Fits the Honeycomb Storage Wall: https://www.printables.com/model/152592-honeycomb-storage-wall
Door/Wall Clip for Notes (Paper Holder) A simple but very practical wall clip for holding single sheets of paper, notes, reminders, or posters on a wall or door. Just push the paper into the clip – no pins, no tape, no damage to the…
Best printed with TPU. You can adapt the infill percentage to the stiffness of your material. When using material softer than 98A shore hardness, I recommend using the shorter flag. Otherwise it will bend during printing and start messing…
Be sure to use filament with some flexibility and UV resistance. Also print it sideways (as in the .3mf file), so the hook doesn't break when you clip it onto the griller's sidebar.
Fits 34mm MTB handlebars. Adapters for 25.4mm and 31.8mm are included. I recommend printing the adapters from TPU95. Recommended material for the rest: ASA GF or ASA CF. Use two zip ties to fix the handlebar and Olight (with its original…
Be sure to use filament with some flexibility and UV resistance. Also print it sideways (as in the .3mf file), so the hook doesn't break when you clip it onto the griller's sidebar.
It's best to print it from TPU/TPE, but the design will also work with PETG. Use <0.25mm layer height and max. 0.6mm nozzle when printing with PETG. No support needed. Prints in 10-15min. Improved the knob - no support needed anymore.
I couldn't see my cacti being separated in different pots, so I created a dual-pot so they can live together from now on. :-) I printed mine with fuzzy outer skin in FormFutura ReForm - rPLA Elephant Grey which gives it a really nice…
Yin & Yang Pendant - The first STL has no hole (can be adapted where needed).
Requires 2 cheapo 6x2 or 6x2.5 mm magnets per horn (or double-sided adhesive tape). There are two versions in the downloads section: one with alignment claws, and an easy-print-version that requires no supports.
This is the largest 3-row shellholder tray that will fit on the build plate of a Prusa MK3/4. You'll have to rotate it around its z-axis to fit (like in the .3mf file).
Best printed with TPU with a shore hardness of 50..60D, e.g. extrudr Flex Hard. That gives the feel of a tupperware lid. Also, that material can be put in the dishwasher safely. Of course you can also use 95A material, but might want to…
A pen box for a peg board with a 45mm keyhole grid
The joints work best, if you print it standing on its side. I use organic supports to minimize the scarring.
The metric version can be found here: https://www.printables.com/model/519596-dewalt-metric-tap-and-hex-die-set-case
Even more improved and modular version (complete re-design for easier printing and better functionality).
Flight hole slider for a bee hive. Two or more can be combined for larger hives.
Temperature and humidity display mount for the honeycomb storage wall system.
Let me know if you also need a 5mm version, I already have it in Fusion, just need to upload the STL.
You can pre-squeeze the clamps of the knob a bit to make it easier to insert into the drawer. It's quite a snug fit.
Box for for 8 flat shellholders and 8 shellholders with foot. For RCBS, Lee, Redding, Hornady etc.
Print from stiff filament such as PETG-CF etc. I've also added a stronger version for PLA/PETG/ABS, which is slightly bigger and has a smaller chamfer angle.
I've printed mine from Prusament PC Carbon Fiber using a 0.6mm nozzle with 0.25mm layer height, 4 perimeters and 15% gyroid infill. The 20mm hook came out so strong that I could not break it, even when I used my full weight.
Just for the looks: I recommend a color change on the last 2 layers. Of course you can also print the parts in one color. PETG, 0.4mm nozzle, 0.28mm DRAFT mode works perfectly. The connectors are a snug (0.1mm) fit. I did not design a…
Use TPU for printing. It will be a snug fit for your lens and not fall off.
The modules fit easily on an MK3/MK4 print bed and can be printed without support. Wood filament is recommended of course. A 0.6mm nozzle and 0.32mm layer hight is fine.
A holder for punches (8mm hex base) for the honeycomb storage wall system (HSW)
Print it lying on its front side and enable snug support. 0.4mm nozzle and 0.2mm layer height will be a good approach.
You might want to print the 3 smaller parts separately and in a different color to get the look from the cover photo. Easy printing. No support, brim or whatsover needed.
How does it work? Printing The model will fit most off-the-shelf folding rulers. Anyway, you can use the CAD file to adapt it to the size of your ruler. Assembly You'll need an additional M4x10 screw. Tap an M4 inner thread into the hole…
If you plan to hang heavy stuff on it, consider printing it from PETG and user 3 outer perimeters. For normal shirts and suits it's just fine to print it from plain PLA. Prints without supports,
This “mouse repellent” plate fits an "Einheitsmaß/Schulmaß" beehive. Dimensions of the plate: 388x50x4mm. The dovetails are very tight and should hold without glue. Just use a vice, if you are not able to click it together by hand. PETG…
Replacement grips for the Gaztanaga Eibar Destroyer
Holds 12 6/9/12mm cassettes, 7 24mm cassettes, 5 36mm cassettes or any combination. Peg distance 45mm.
Be sure to use filament with some flexibility and UV resistance. Also try to print it sideways, so the hook doesn't break when you clip it onto the griller's sidebar. You might want to print it with 100% infill too.
I've printed the case from durable PCTG and the lid from PETG (for flexibility). No supports needed.
These grips are for an original Mauser C96. The hole fits a Ruthex M4 threaded insert, an additional M4 screw in appropriate length is needed. I recommend printing it from PETG or other rigid material. I also recommend printing it with…
I recommend printing it from PETG or hard Flex material. The cutters are ment to be inserted with the tip pointing downwards.
Print upside-down on a textured plate and with a 0.25mm nozzle for the best look.
These are hooks for attaching a privacy screen to a balcony railing using 16mm grommets. I recommend using ASA, PA12-CF or any other UV resistant filament for printing. There are larger and smaller hooks, for my railing they can be used…
If you print it from hard TPU, it will be absolutely watertight when fastened firmly.
Prints without support. Uses approx. 500g of filament.
The wind used to throw my terrace door shut, so I designed this door stopper that is aligned with the contour of the terrace door and wedges between floor and door to fix it. Can be printed without support. It's designed to work pretty…
These hooks are suited to hang large kitchen utensils on the upper edge of a wall grid. In case your wall grid looks different, I gladly share the CAD files to adapt the model.
Three M3 holes need to be drilled to the narrow flange on the backside of the DRO tray. Simply use the holes on the mount to mark the correct position.
These lids are super handy and can be used for nosings or just to prevent insects from flying into the glasses.
I've got a Tuya ZigBee motion sensor to detect if my cat wants in at the terrace door. When I sit on the terrace myself, I of course don't want the sensor to trigger all the time. That's why I came up with this cap for the motion sensor.
This is a simple lid for Adam's Pistachio Bowl. It protects the pistachios from humidity, insects an curious pets.
To wszystkie aktualnie dostępne wyniki.
