Liczymy pasujące modele…
These are all the parts I created to mod the Prusa Lack enclosure V2 to fit the ender 3. Most of the parts can be found in the Prusa build here: https://www.prusaprinters.org/prints/3673-prusa-enclosure-v2-mmu2s Wood screws:…
A quick clip to hold your LED light strips. These are for the type that come on spools, snug for 8mm wide ones. I made 2, one is smaller designed for double sided tape and the other has counter sunk holes to fit 4mm screws. I made this…
I took the Voron enclosure part and made it longer so I could use it on other projects.
This is a working candy claw machine that has many 3D printed parts. We shared this at ERRF 2022. Have a look at what it does here: https://youtube.com/shorts/K-8PsoMRIVw Note: Watch the different model files, you don't need to print them…
I made this to be able to drill holes in the enter of 3030 extrusion a little easier. I should slide in to T slot pretty easy. I needs supports that are a pain in the ass, but check out the pic of how I put them in 3MF file will have…
I made this clip to give you roughly a 25mm starting gap for you filament when using the 3D Chameleon. This is just easier to use to line up the filament instead of tape. I use PETG to print this because it's a little more flexible than…
I changed pretty much everything about this model, but it still does look the same. The base does require support from the build plate only. Video on it here: These are not affilate links, they are just for reference. You will need some…
I made this custom to hold all of our pot lids and keep them organized. I have included the STEP file so you can change it up. I designed these around hexclad lids that have a 10mm lip that does into the pot and a 4mm outer rim. It's a…
This is a common puzzle you see made from wood. I reproduced it so you could 3D print it. Enjoy! Print 5 fins, 3 Sticks and 1 key.
This is a replacement socket tray I made to replace the one I got with my craftsman 140pc socket set I received in the 90's. You should be able to print this face down on any 300x300 printer.
Easy print, stacked so you can print them with a multi color or tool head machine. You can also separate them if you wish. No special printing instructions needed.
A simple box I created to fit my Craftsman roll around tool box. Great for sockets. An easy print on a big printer. Printed on the Folgertech FT6.
Not sure why, but I got the idea that hummingbirds needed to take a rest. So I designed this perch for them to hangout on and you know what? It worked! They show up a couple times a day just to take a load off. Here are some videos, I…
Clips for the 3dChameleon Y pipe. There are 2 sizes because the outlet tube has more space than the 4 inputs. So you need 1 outlet clip and 4 inlet to do all of them. I use PETG because it's a little more flexible.
This is a regular amp that I took apart and replaced with 3d printed part so it would match my Prusacaster. The inserts are used in the top and bottom pieces, 4 holes each. 4 holes on the sides to hold the back on. 4 holes on sides of…
This is a simple cam mount for and enclosure so you can mount it in the corner.
This is a back to the BigTreeTech Bezel that fits the pad5 touch screen. I made this for a video where I power the screen with a battery. This back holds the battery. The back has a button that will turn the battery on and off. Both parts…
Print this upside down. I used ninja flex for this with Prusa slicer default settings. It just presses into the main body, it pretty tight, no need for glue.
Seckit SKGO Inductive probe mount for auto bed leveling. This fit behind the nozzle. Offset in Marlin X 17 Y 59. I used 3 M3 screws and nuts to mount the probe in the stock SKGO holes and 1 M3 x 10mm screw and a square nut to mount the…
Just added a holder for an external antenna.
These are mount extensions of a q-see plastic body camera mount. These have 20mm 1.5mm threads. I used these for my covered porch, I had to lower the camera to be able to see under the eve. I used PETG, .15mm layer heights and 0.9…
I needed a door stop that was easy to use because my walkout basement door is pretty high off the ground due to the footing. So I came up with this. I used 5 10x3mm round magnets because I had a bunch. Super glued them in. You could also…
A cover for the Simpson EZ base post cover. I used one of these for my deck railing on the concrete base. It does require supports on build plate only. It can be a little tight on the sides depending on the screws you use to attach the…
I took Pooch's great original file and split the border to a separate piece so that it can be printed in multi color with the MMU2 The .3mf file should work for your MMU2 profile. I scaled mine up to 150% from the original design. Thank…
This is a hook for flowers and feeder off you composite decking that requires no screw holes in your deck. I had a bunch of these balusters left over and wanted to use them. I bought these railing kit from Menards. Found here:…
I did my best to make a simple mount for the Hemera extruder on the FT-6, but this needs to be done in order to make it successful. Step 1, attach the PCB with M3 nuts and M3 x 14mm screws to the back mount with the printed spacers. Step…
Optional add on items I made for the Printed Solid enclosure. It includes coner and center feet I printed from NinjaFlex and a bracket for the PSU mount.
A quick clip to help manage high pressure 3/8" ID vinyl hose. I got tired of my condensation pump hose kinking and being hard to manage so I made these clips. The are 5/8" in size. They fit this type of hose: https://amzn.to/3OpgRvJ…
Hooks you can use on your Gladiator shelf, they should slide into the slots. I have added a left and a right. They should have some supports, but they would probably print fine without them. I show a picture of the slicer. PLA is fine.…
A quick clip to help manage condensation pump dehumidifier vinyl hose. It fit 3/8" ID vinyl hose, it's about 19/32 OD. They fit this type of hose: https://amzn.to/3OpgRvJ (Amazon aff) My furnace used 1 ¼" iron pipe for the gas feed as a…
This is to help you find the center of a 3x4 landscaping timber so it's easier to line up holes for stacking them down. This is also tape measure friendly. I printed this out of ASA, so there is a bit of shrinkage. It fits snug on the…
This is a hub I created for a 5 lb colorfab spool so it would turn easier on my ½" PVC spool holders I use on the ceiling in my basement. Inside 22mm ish outside 52.8mm ish. Spool holder here:…
To wszystkie aktualnie dostępne wyniki.
