Liczymy pasujące modele…
The enclosure for Sonoff NSPanel Pro with IEC C8 AC socket for convenience remove the mainline or for optional inline AC switch. The enclosure is designed with minimum overhang for print without support. The screen angle is 45 degrees. 🚀✨…
Build the ultimate DIY soldering fume extractor from an old 120mm PC fan. This all-in-one design included a DC power forwarding hub, detachable magnetic hood, voltage display and easy access carbon filter bay. The fume extractor includes…
While I really liked the original nozzle design by Modu but required inserting a magnet between the printed parts, which felt a bit inconvenient for me. So, I decided to remix it to simplify the assembly process by split the it to 3…
Swann-Morton Scalpel No.3 with #11 Blade Cover Caps. Included 2 versions (Spitted and Full). The split version can lay flat on a printer. So it can print faster and a lot easier. The parts are also stronger when printed this way. But they…
This custom-designed 3D-printed enclosure is made for the ESP32 4-channel relay module , ideal for controlling low-power devices in your home or workshop. The design includes space for status LEDs and physical control buttons to manage…
Inspired by the control panels found in 1960s-era spacecraft, this 4-channel switch panel combines vintage aerospace styling with modern smart home functionality. The primary design is intended for use with an ESP32 and Home Assistant .…
Backer/Spacer/Feet for IKEA Skadis Pegboard - M4 Screw
This custom 3D-printed hanger is built for the MINI TURBO JET FAN X3 , letting you easily push the fan into place where it securely locks, staying stable and ready use. The hanger can be mounted on either an IKEA SKÅDIS pegboard or…
Re-design the interior to fit #10A blade. Also fits blade #11. Related Links:: Swann-Morton Blade extractor More Info about this design Filament I Use:: eSun ABS+ (Fire Engine Red and Black) My Channel: YOUTUBE CHANNEL:…
Drilling evenly spaced and perfectly square dog holes can be tricky — but this simple 3D-printed template makes the job much easier and more accurate. I designed this template while building a DIY circular saw cutting platform from a…
Low-cost but high-performance portable wireless soldering station powered by Makita 18-volt battery. This soldering station uses a clone Hakko T12 controller, which is extremely good for the price. It can heat up to 320 degrees within 30…
Magnetic Vise Jaw Pad for Stanley Multi Angle Hobby Vice The Stanley Multi-Angle Hobby Vise came with rubber jaw pads. I needed something a bit more rigid so I designed my own. I printed it with ABS, which provides a more rigid grip than…
Dual AA Battery Dummy with Buck Converter. The original battery dummy is designed by Inversion: https://www.thingiverse.com/thing:312059 ► SEE THE VIDEO FOR DETAIL: ► COMPONENTS FOR THIS PROJECT MINI-360 Buck Converter:…
Enclosure for the KWS-AC300 meter with extended power cord to solves common issues with budget wall plug AC power meters, like hard-to-read displays and tight spaces I've use an IEC320 C14 inlet with fuse and switch, and a YP-53 IP44…
I designed this bracket to replace the original 3.5" hard drive in my 2011 iMac with a 2.5" SSD, while retaining all of the original Mac hardware. The drive bay uses a 6/32 pin on one side and a screw bracket on the other. I specifically…
I designed this cap for use with my Upgraded SOVOL SH01 Filament Dryer , which switch its filament outlet with a PC4-M6 coupler. This modification allows me to secure a PTFE tube to the dryer and feed the filament directly my printer. The…
Just increase wall thickness and add some clearance to fits #10A blade. The original design from M600 . Notes:: I print with some brim to increase first layer adhesion. I only test with blade that I have (#10A and #11). Filament I Use::…
Custom Bluetooth audio receiver module for Tivoli Audio Model One. Wiring Diagram: https://simplymaker.net/3d-printing/tech-upgrade-for-original-tivoli-audio-model-one/ Build VDO: ► SUBSCRIBE TO THE CHANNEL: http://shorturl.at/bjrEK ►…
Easy to print Stand/Organizer for Dremel Versaframe 2200 Torches Video Link: https://youtube.com/shorts/UQazsbHCgEA ► SUBSCRIBE TO THE CHANNEL: https://shorturl.at/bjrEK ► FILAMENT USE IN THIS PROJECT eSun PLA+:…
Small part tray perfectly fit SAMLA 22l insert plastic tote. Include 3 Sizes: Part Tray Corner.stl - 122 x 40 mm (Can flip the model to fit on other corner). Part Tray 40x110.stl - 110 x 40 mm (2 Slots) Part Tray 40x60 - Vase.stl 60 x 40…
Universal cable lock fits any Arca-Swiss standard rail. Design to use with any camera L-Plate. Can hold USB, HDMI or Power cable tightly in place. Can also mount at bottom to organize cable. COMPONENTS FOR THIS PROJECT:: M4 SL-Type hot…
Upgrade part for RELIFE RL-601L quick release PCB fixture for improved versatility and stability in various soldering tasks. This easy upgrade increases the clamp height, enabling you to securely hold PCBs with taller components,…
This compact enclosure is designed for the ESP32 WROVER-B module, specifically for use with Squeezelite-ESP32 firmware. However, it's also use for other application and will fit in limited space. I use this module as Wifi to Bluetooth…
Mount base for the ZE08-CH2O formaldehyde sensor and optional Buzzer module designed to be used with the 3D Printer Emission Sensor Array (SensorBox V2) . The original design attached the sensor directly to the carrier module using…
A DIY capacitor discharge tool , providing a secure and convenient way to safely discharge capacitors. The enclosure is designed to use M12 banana binding post sockets which are compatible with most multimeter probes, allowing you to…
XTAR VP4 Plus Battery Charger Magnetic Mount for IKEA Skadis Pegboard . This holder is specifically designed to be used with my modular camera charger station . Main Project Page: https://tinyurl.com/charger-station Modular Charger…
I recently upgraded my setup with this rotating vacuum hose to make it more comfortable to use with my power tools. The hose I bought was advertised as compatible with Festool vacuums , and since I’ve never owned any Festool equipment, I…
A cost-effective swing arm LED desk lamp that is super bright and comes with a smart Wifi switch and a 433 MHz RF remote control. You will be able to control the lamp's brightness and turn it on and off with your smartphone through a Wifi…
This is a 36 mm OD hose adapter designed to work with the Festool-style rotating vacuum hose . It allows the hose to connect to tools that use a ~36 mm ID dust port , such as many Bosch circular saws , DeWalt random orbital sanders , and…
Hanger/Holder for Magic Arm - Wall Mount or IKEA SKÅDIS Pegboard. This 3D-printed Magic Arm Hanger is designed for easy mounting on walls or IKEA SKÅDIS pegboards with M5 screw. It's perfect for holding adjustable arms, clamps, or other…
A compact 3D printed dust port designed to improve dust collection performance during edge trimming tasks . The dust port mounts underneath the router base and connects to a 36 mm vacuum accessory , greatly improving dust extraction when…
Magnetic Bench Vise Jaw Pad for 2.5-inch Vise. The jaw pads come in two versions: standard pads and custom pads designed to securely clamp screw or bolt heads. Project Page:…
A simple and easy to print low-profile adapter designed for a 2-inch cyclone dust separator . It converts the cyclone port to 36 mm and 30 mm sizes, allowing you to connect standard dust hoses directly without bulky PVC fittings. The…
PC4-M6 Coupler Cap is designed to fill the gap on the BIGTREETECH Filament Sensor V2 to prevents dust and providing a cleaner look. I've also designed a custom mounting bracket specifically for the Ender3-Switchwire (E3-SW) that you might…
XTAR VN2 Camera Battery Charger Magnetic Mount for IKEA Skadis Pegboard . This holder is specifically designed to be used with my modular camera charger station . Main Project Page: https://tinyurl.com/charger-station Modular Charger…
This inline smart switch case is designed to house the Moes Dimmer Module (MS-105Z) , providing an easy and safe way to add a smart switch or dimmer without the need for in-wall installation. The module is mounted to the 3D printed case…
DIY Blade Guard for Homemade Jigsaw Table Make Video: ► SUBSCRIBE TO THE CHANNEL: http://shorturl.at/bjrEK Project Page: https://simplymaker.net/3d-printing/diy-blade-guard-for-homemade-jigsaw-table-how-to-make-your-own-with-3d-printing/…
XTAR SN4 Camera Battery Charger Magnetic Mount for IKEA Skadis Pegboard . This holder is specifically designed to be used with my modular camera charger station . The design includes both 1-piece and 2-piece versions, allowing you to…
Additional 3D Print Parts: ESP32 CAM Case by Paul Arden: https://www.printables.com/model/6592-esp32-cam-case-with-tripod-mount M5 Knob by Perinski: https://www.thingiverse.com/thing:455821
This remix replaces the original front panel and custom LED PCB with four 12 mm illuminated waterproof push buttons (3V–6V LED version) . The buttons connect directly to the ESP32 GPIOs, while the LED rings use the relay GPIOs to indicate…
Hanger/Holder for Light Stand Adaptor needed 4x 5/8 Spigot Studs. To mount on IKEA Skadis Pegboard needed 15mm M5 screw and M5 dowel by MakerTom https://www.printables.com/model/319281-ikea-skadis-dowel
This alternative front connector mount plate is designed to hold an IEC320 C14 AC input, 2x GX-16 connectors, a 5.5mm barrel DC connector, and an LCD voltmeter. It's perfect for enhancing your modular power supply setup. Designed to be…
This is a remix of my original Edge Trimming Dust Port for Compact Routers . In this version, the Bucket v2 has been modified from a 36 mm to a 33 mm inner diameter so it can connect directly to a Festool-style rotating vacuum hose…
To wszystkie aktualnie dostępne wyniki.
