Liczymy pasujące modele…
Gridfinity 1x2 bit holder I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file Included is a height extender (stl + f3d) if you want to stack two units.
Gridfinity build plate holder Only tested with the Bambulabs build plates. Included is the f3d file You need to print this twice. I used a 0.2mm layer height with a 0.4mm nozzle. (I used ABS.)
Grdfinity 1x2 small socket holder (1/4 inch square drive) I tested 4mm to 11mm sockets I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
2x2 Gridfinity rack for 8 small wrenches or tweezers. I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file (modified from the original by Zack Freedman. The rack height is 30 mm shorter than the original. The bottom…
19 inch rack bracket for minisforum ms-01 power supply this mounts to the side bottom of my rack enclosure No support material needed. Included is the f3d file
2U 19 inch rack front panel mount for minisforum ms-01 These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. Included is the f3d file
The hooks clicks into a pegboard with 10x10mm square holes. The baseplate has a flat underside, with a groove over the entire width. The hooks click into the groove. The hooks should be printed flat on their side. No support is needed.…
Gridfinity holder for 3m Stanley tape measure It does not fit the 12' tape measure. I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file
2x2 gridfinity rack for 6 Wiha PicoFinish screwdrivers I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file (modified from the original by Zack Freedman) It is a two-part model, that has to be glued together.
Stanley FatMax FMST1-75779 Shallow Organizer Lid for the small bins This lid exists, to prevent small washers to move to another bin. I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Print with the top of the lid on the…
Gridfinity dashboard module for streamdeck xl Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x dowels, printed straight up, with a brim. Print bracket on the side. No support material needed. You…
Gridfinity 2x2 Bosch GAL 12V-20 Battery Charger Holder Included is the f3d file I used a 0.2mm layer height with a 0.4mm nozzle. The two screw holes at the bottom need support. Unscrew the bottom part of the charger and replace with this…
Gridfinity dashboard module for streamdeck+ Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x dowels, printed straight up, with a brim. Print bracket on the side. No support material needed. You…
19 inch rack front panel for two 176mm wide switches
1U 19 inch rack front panel mount for one 176mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
Gridfinity Interface plate for dashboard modules You need magnets to connect to a Gridfinity base plate . I used a 0.2mm layer height with a 0.4mm nozzle. no support needed Included is the f3d file
Gridfinity 6x2 Holder for Proxxon IBS/E rotary tool and accessories There are two parts I used a 0.2mm layer height with a 0.4mm nozzle. Included are the f3d files
2U 19 inch rack front panel mount for Mac Mini M1 This model also fits the OWC miniStack STX , if you remove the rubber feet. These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support…
2U 19 inch rack front panel mount for two 176mm wide switches These panel mounts require the DAP 2U MP-1 bracket. I have tested with cheap unmanaged switches: 8x 2.5Gb ports + 1x 10Gb SFP+ 4x 2.5Gb ports + 2x 10Gb SFP+ Print the front…
Gridfinity holder for Olight S2R Baton version 1 flashlight and magnetic charger. Only tested with Olight S2R Baton version 1. I don't know if version 2 of this flashlight fits? The overhang of the slot for the charger needs support…
2U 19 inch rack front panel mount for mean well LRS-75-5 power supply These panel mounts require the DAP 2U MP-1 bracket. parts used: mean well LRS-75-5 power supply 4-port d-tap bus splitter voltage+current meter Print the front panel…
Stand for Hanshow Nebular 750Y electronic shelf label. The Electronic Shelf Label is used with openepaperlink no supports are needed Included is the f3d file.
2U 19 inch rack front panel mount for WiiM Pro Plus These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. This mount is designed, so that the WiiM Pro Plus slides in from…
Gridfinity dashboard module for streamdeck mk.1 Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x dowels, printed straight up, with a brim. Print bracket on the side. No support material needed.…
2.3U 19 inch rack front panel mount for 12.6" 1920x515 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005001966967133.html (with touch) Print the two halves of the front panel mount / two clamps on the…
Gridfinity 2x2 holder for 3Dconnexion SpaceMouse Compact
2.5U 19 inch rack front panel mount for Ugreen Nexode CD271 200W USB Charger These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Gridfinity 4x2 holder for sabrent 10-port USB-Hub https://www.amazon.nl/dp/B0797NZFYP?ref=ppx_yo2ov_dt_b_product_details&th=1&language=en_GB I used a 0.2mm layer height with a 0.4mm nozzle. no support is needed. Included is the f3d file
Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials I used this display: https://nl.aliexpress.com/item/1005003014364673.html (with touch) Requires interface plates and magnets to connect to a…
2U 19 inch rack front panel mount for 3.7 inch e-paper and raspberry pi zero These panel mounts require the DAP 2U MP-1 bracket. parts used: 3.7 inch e-Paper HAT Ethernet / USB HUB HAT Raspberry Pi Zero W Print the front panel mount on…
Gridfinity dashboard module for 14" 3840x1100 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005003332731770.html Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x…
Tap guide for DAP 2U MP-1 bracket Support material is needed for the two overhangs at the bottom. Included is the f3d file
2U 19 inch rack vertical front panel mount for raspberry pi compute module CM4 and oled display These panel mounts require the DAP 2U MP-1 bracket. parts used: Raspberry Pi Compute Module 4 Compute Module 4 Base Board Heatsink 128x32…
Gridfinity 6x2 holder for Bosch 12V-35 FC cordless drill/screwdriver and accessories There are two parts The holes for the drills are metric (1.5mm to 8mm drills in 0.5mm steps) I used a 0.2mm layer height with a 0.4mm nozzle. Included…
Bisley hanging file cabinet bracket for 5x Stanley FatMax FMST1-75779 Shallow Organizer I removed the metal hanging file brackets from the drawer. I printed this model 4 times, per drawer, in ABS and mounted using double sided tape…
Gridfinity dashboard module for loupdeck live Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 3 x dowels, printed straight up, with a brim. Print bracket on the side. No support material needed. You…
4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 4.3U apart. Print the two halves of the front panel…
1U 19 inch rack front panel mount for one 218mm wide switch, one raspberry pi CM4 (with oled display), two 4-port unpowered USB-hubs
Bambulab AMS bracket for 2020 v-slot extrusions. The stand, for dual AMS, is made out of 4x 500mm and 10x 400mm v-slot extrusions with gantry plates, used as sliders. (hole spacing is 10mm) I printed this in PLA. You need to print this…
Gridfinity dashboard module for two M5Stack dials Requires interface plates and magnets to connect to a Gridfinity base plate . Print bracket on the side. No support material needed. You need angled usb-c cables (or just connect power…
Portrait stand for Hanshow Nebular 750Y electronic shelf label. The Electronic Shelf Label is used with openepaperlink I printed it with the leg pointing up, at an angle, with a 10 mm brim. No supports were needed. Included is the f3d file.
2U 19 inch rack horizontal front panel mount for raspberry pi compute module CM4 and oled display These panel mounts require the DAP 2U MP-1 bracket. parts used: Raspberry Pi Compute Module 4 Compute Module 4 Base Board Heatsink 128x64…
2.5U 19 inch rack front panel mount for Owon XDM1041 / XDM1241 / DGE2070 / DGE2035 These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount /…
19 inch rack anti-sag bracket for QNAP TL-R400S Print the bracket on the side. You need two brackets, one of them mirrored in the y-axis in the slicer. No support material needed. Included is the f3d file
Gridfinity 4x2 holder for Raspberry Pi Compute Module CM4 and oled display Designed, so that another 4x2 module should be stacked on top. parts used: Raspberry Pi Compute Module 4 Compute Module 4 Base Board Heatsink 128x64 1.3" oled…
1U 19 inch rack front panel mount for one 222mm wide switch and a blanking plate
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display More information, about the hardware and software, can be found on on github . You need two stands, one of them mirrored in the y-axis in the slicer. Print the…
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
2U 19 inch rack front panel mount for Google TV Streamer These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. you need 2 nuts and bolts. (I used M3 after using a drill…
Gridfinity dashboard module for streamdeck mk.1 and Lilygo T-Display S3 Long (without shell) Requires interface plates and magnets to connect to a Gridfinity base plate . Requires 4 x dowels, printed straight up, with a brim. Print…
To wszystkie aktualnie dostępne wyniki.
