Liczymy pasujące modele…
English: This one is a very quick and dirty mockup of Gardena bottle cap by ahoeben ( http://www.thingiverse.com/thing:148310 ) and the Lawn Sprinkler by falcon20cne ( http://www.thingiverse.com/thing:414552 ). I just put those two things…
I used the base of netzlasts Shelly1 DIN Rail Clip and designed two clips, one for the normal Wemos D1 Mini and one for the ESP32 D1 Mini, which is a bit wider because of the additional I/Os. Category: DIY
Customized version of http://www.thingiverse.com/thing:267879 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=267879 Instructions Using the following options: bolt_type = M6 nut_trap = no length = 35…
English: I found this thing: https://www.thingiverse.com/thing:1962611 to mount my 24"-screen to the wall. since the case of my screen seams to be not the stiffest one, and the parts had a little bit loose fit, the screen leaned forward…
This is a higher Version of the original box, so you can mount three WAGO 221-413 or 221-423. It also has three outlets.
This is a compact organizer for the sanon Selphy CP-1500. You can store the printer, the paper tray, some postcard-papers, an additional ink-cartridge, the power-adapter with its cable, two SD-Cards and a USB-Stick. Maybe other…
english: These two parts are replacing the original airbox-service-triangles (ktm-part-nr.:61006003002 and 60006003002) for higher air-intake. Works best if you use a special mapping for this mod and a exhaust without an catalysator.…
This is a little rack to organize your revell-paint. You can also put your paintbrushs in. german: Hier ist mein Ordnungssystem für Revellfarben mit Pinselfach. Category: DIY
Here is a minimalistic radiator/fan-dovetail-mount for 120mm fans or radiators with a distance of 104mm between the mounting holes. Just screw the small rails to your radiator and slide them into the base. The clearance between the slide…
The original bearings of my old Hudora foosball table from 2011 or 2012 bothered me right from the start. The rods had an excessive amount of play in the bearings. Before considering a potential replacement, I wanted to try a bearing…
English: Mount your RAMs wherever you can access a M6 screw. This simple design is a 1"/25,4mm ball with a hole and a short hollow shaft. The other parts are a customized version of http://www.thingiverse.com/thing:267879 , which I did a…
English: Pimp your partyphotos with this simple accessories. The glasses make you look very intelligent, the mustache makes you look like a sir and the lips, they would have made Marylin jealous. Please excuse my bad drawing skills - I am…
Here is a lasercutter, I designed to cut and engrave some plywood, leather, cardboard and other materials. You will also need some 40x20 profiles, 3 stepper-motors with drivers, a lot ob GT2 belts, pulleys an rollers (all seen in the…
This is a small feeding house for birds, squirrels and other animals, which you can place on the ground or up in a tree. You can also use it as a feeder for your hamster or mice in a terrarium. I included a stl-file to 3D-print it and…
This is a gcode-file which is burning several filled rectangles on your material. I choosed to go from 10 to 100% in ten steps and for the speed I started from 300mm/min up to 3300mm/min in three hundred steps. Be careful, some materials…
My second or third print on my brand new Snapmaker 2.0 caused a big mess. It formed a 100%-Infill-Blob around the Hotend. while taking it a part I saw a crack in the black plastic piece. You can get this spare part from Snapmaker for…
This is a minimal wallmount for monitors with a vesa100-compatible mounting plate. It works like a frech cleat but with no chance for the monitor to slide sideways of the mount. I have a 24" benq monitor attached to the mount an it is…
english: Based on http://www.thingiverse.com/thing:284923 , I changed some details. The Case now has a bigger cutout for the USB-Power, so that you can use normal USB-Micro-Plugs from nearly every mobile-power-adapter. It also comes with…
Based on this piece https://www.thingiverse.com/thing:713599 I designed a bounceplate, which holds the flash up, but also diffuses the light from the flash in the direction. Print in with transluscent material to get the best results. The…
Lower Front suspension arm for Tamiya DT-03 Chassis. There is an arrow that indicates the mounting direction. The holes have to be smoothed with a 3mm drill or better with a 3mm reamer. Tamiya E-Teile (Querlenker oben) DT-02 / DT-03…
Just another adjustable bed for the popular K40-Laser You will also need some 20x20mm square aluminium-tubes (I used 4x230mm + 4x284mm with 1,5mm wall thickness), M8-threaded-rodn M8-nuts and at least 12 ball-bearings from your local home…
Upper Front suspension arm for Tamiya DT-03 Chassis. There is an arrow that indicates the mounting direction. The holes have to be smoothed with a 3mm drill or better with a 3mm reamer. Tamiya E-Teile (Querlenker oben) DT-02 / DT-03…
German: Wohin mit deinen stinkenden Sportschuhen zum Trocknen? Lege sie auf den AntiCheese und lass den Ventilator frische Luft in deine Schuhe blasen. Es funktioniert auch für Handschuhe. Die STL sieht in Prusa-Slicer etwas seltsam aus,…
This is a mount for the eachine tx02 camera ( https://goo.gl/4is3j3 ), to mount it on a common tinywhoop-frame. One part is without a tilt, the other one has a 10 degree tilted cam-holder. I also added the Sketchup-files, so that you can…
This is a simple Football Stand with a ~40mm Neopixel-ring and a ESP8266 (Wemos Mini d1). I flashed the WLED-Firmware ( https://github.com/Aircoookie/WLED ) to control the light effects via wifi.…
A simple USB-powered scoreboard for tabletop-sportgames like Tipp-Kick or similar. I used an arduino nano, a 16x02a-LCD, a littel 12mm piezo speaker, two 5mm LEDs, a potentiometer for adjusting the contrast and three buttons. The code,…
english: This is a quick and dirty work, but i like it. While my son was sleeping, I did 2 Sunny side up eggs for his toy kitchen. The eggs arent very big, so that you may have to scale them to fit your belongings. I printed them with a…
This is a shocktower, based on the STL from carwenni (thanks for your design). I just mounted a GoPro-mount on top of it. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: 120 Infill: 60-85% Filament: doesn't matter petg…
English: This is a toolholder to clamp on the 20mm shaft of the proxxob tbm 220 or similar machines. Deutsch: Ein Halter für die mitgelieferten Bohrfutter und Bohrer, den man an den 20mm Säule einer Proxxon TBm 220 oder ähnliche…
This is a simple belt-winder-tool. You'll need a m4-screw at the bottom of the spool. Then it is possible to drive the spool with a 7mm-nut and a cordless screwdriver. I will soon add a printable crankshaft for manual powered drive. The…
English: Since I have mounted the spool of my prusa i3 clone to the wooden plate, the filament has to be guided upwards to the extruder. Thats why I designed this movable filament guide. sure it looks a little bit exaggerated, but I like…
English: Inspired by http://www.thingiverse.com/thing:636591 I created my own race-chassis for the hubsan X4 (first generation, with only 2 LEDs) with 7mm motors. The chassis, printed in PLA, weights ~8.5gr, what is nearly the same weight…
english: Because I am too fat :), I bought a lightweight battery ( http://www.asn-shop.de/Motorrad-Batterie-132V-5Ah-V3-4s2p ) for my KTM SMC-R 690. The new battery is way smaller than the original one, and so i designed a insert for the…
Organize your sewing-tools with this piece of printed plastic. This is the sewing-machine, I designed this thing for: https://www.amazon.de/gp/product/B0CGRF14P9/ref=ppx_ I atteched the skp-file, so you can change this thing with sketchup…
English: This is a little planter with a removable bootom spacer and a "mold-prevention". If you flood the planter, the water will leak out of the infill-indikator-part. Happy planting! Deutsch: Das ist ein kleiner Pflanzkasten mit…
A simple print to store your hairdryer. If you want to change the dimensions, I uploaded the Sketchup-Files as well.
These are the Frame-Parts for a fully working laserplotter. You need several parts to complete the machine: 2x Nema17 Steppers 2 stepper drivers 2x Belts 4x matching toothwheels ~16x16cm tile of alloy or something similar arduino uno 9V…
in english: based on my first spool holder ( http://www.thingiverse.com/thing:364061 ), I improved the design and added more features. This filament-spool-holder contains a tunnel for i.e. permanent markers to give the filament a shade of…
You will need a pipe with 16mm outer diameter, some 4mm screws (countersunk head screws) and of course as many table-football-players with a 16mm hole as you like. I uploaded the complete sketchup-file, so you can easily edit the parts if…
English: For my Anet A8, I designed a simple modular spoolholder which can be screwed onto the baseplate. The cones can take a 19x5x8mm bearing. If your spool has to be mounted higher, just print a longer tower, or do as I did - use a…
English: I made a little change to the FlexiStruder by MikeFrancies, published Oct 29, 2015 ( http://www.thingiverse.com/thing:1099016 ). The flexistruder seemed to be the best solution, for printing flexible filaments. I run a similar…
Neulich war unser erster Termin des neuen Reparaturcafés. Da die Räumlichkeiten in denen das stattfindet normalerweise von einem großem eSport-Verein genutzt wurde bei der Einrichtung nicht auf toll ausgeleuchtete Arbeitsplätze geachtet.…
These are files for every letter of the alphabet, so you can surprise every one of your family with his or hers individual smartphone- or tabletstand. Sketchup2017 file included, if you want to change something.
Hier ist eine Abdeckung, die man anstelle des Balleinwurfs montieren kann. Die Abdeckung passt auf viele Kickertische der Firma Ullrich Sport. Ich habe sie an einem Ullrich Home montiert. Sie ist bündig mit der Innenseite und hat dadurch…
To wszystkie aktualnie dostępne wyniki.
