Liczymy pasujące modele…
a friend wanted a cardboard strip cutter to make cat scratchers, I found one here but it needed supports to be printed so I decided to modify (or rather redesign) it so it can be printed with no supports. This one requires a threaded…
I wanted a box for my batteries so I made one. Assuming infinite stacking height you could have infinite batteries storage! I added two tolerance versions, one with 0.08mm tolerance and other with 0.16mm. My printer managed to print…
My curtain originally hanged on a flimsy thread which broke in several places. This made the curtains hang again. The hook is made up of 2 parts: hook and key . You'd put the hook under the fabric and the key over the fabric. Then slide…
I really like the boruit flashlights (I have 4 different models lol) and wanted to have it mountable on my bike. It's light is 180° adjustable so it's nice to quickly adjust during rides. Thanks to adjustability of the light it can be…
This was tricky to print due to small bottom surface area but my A1mini handled it quite well. Print directions: print on the flat side turn off wipe print slower turn on Arachne wall generator I also lowered minimum wall width to 60%…
Onshape Project URL: https://cad.onshape.com/documents/a72caaa9468cfb1c1f8fcdd4/w/e099a04e25b7ec96936a03ef/e/cb81bed87c14383b0c171f0d?renderMode=0&uiState=675c6def03e03152a01c9942 how to print YOU NEED TO PRINT THIS ON A SMOOTH PRINT…
OnShape URL: https://cad.onshape.com/documents/7532f4bd1851a58a0b46e888/w/f207919a39b8bdad16042b5b/e/30e5bc26c2f24caae9a6dde3?renderMode=0&uiState=67896d316c0d287ce7e03517 My Klipper config: https://github.com/spajo/n3p This mounts both…
I measured wrongly and hung up kitchen cabinets a little bit too high lol. I have very crooked walls and all the cabinets were different heights, so pretty much each segment had to be different depth and height, but that's where 3D…
Hi, I was kind of anxious with using spool holders printed standing up due to layer lines being parallel to gravity when mounted on a printer. I feel much safer with this remix lol. The thread printed fine on a 0.6 nozzle with Arachne ON.…
REQUIRES 2 M3 BRASS INSERTS TO MOUNT THE PROBE TODO: add description Offset according to Onshape measurements should be around 25mm in y-direction. (ignore wrong axes in picture) When measuring using Esoterical's probe offset tool it was…
Updates 09/03/2026 - Updated OnShape document to allow mounting the entrance on the side. TODO: update this and add STLs 10/03/2026 - added new side entrance photos Story I had couple of Heidrun boxes bought at Action from my last move.…
To wszystkie aktualnie dostępne wyniki.
