Leonardo AW139 Helicoper Wall Art
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
- Pobrania
- 127
- Polubienia
- 23
- Ocena
- 5
105 modeli
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Wall holder for WIX_51394XP oil filter. This oil filter fits my CF-MOTO 650 Adventura. The engine oil threaded outlet is 3/4” -16 threads. Yes for a Jap or Chinese bike this is not what I expected. Double check yours. That is what mine…
Wydruk około 25,90 €–31,66 € nettoWstępna wycena jednego wariantu
I took the original Christmas Tree (Thing 1913982) and used a cone shape in Tinkercad to create a hole in it. It was printed in a Exelvan transparent filament using Vase Mode to create a clearer looking tree, and also a Yellow Gold from…
This model is compatible with the lego system.
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This model covers up the rather large opening at the…
This model is compatible with the lego system.
This model is compatible with the lego system.
this is a replica of a license plate lighting bracket for the VW T3 Bully. this is the right side. I'm not sure if the other side is identical. if necessary simply mirror it in the slicer. VW Part Nr: 251943139 print without support. I…
Leonardo AW139 Helicoper Angle Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
This model is compatible with the lego system.
This is now a much better model than before. I have worked on it for hours to increase the details, and reduce the triangle count. It is much easier to slice and prepare the model for printing. This is a model for the Sarcophagus of…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
I Designed this for a buddy when he showed me that they are selling for $25 on Etsy. added 2 little indents on the inside rim of the face so you could add an SCS sticker and then fill with clear resin to get a nice finish. i got my best…
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
Replace Feet pad for MacBook pro 2015 (A1398) With lips. No need glue. With or without tip Added model 2mm height Print setting: 0.1mm layer 100% infill Not Supports material: TPU
This is a replica of the Anasazi flute A-13994-A from the Broken Flute Cave using the measurements given on Flutopedia . It is broken into segments to fit within the build volume. The segments are designed using annular snap joints for…
This model is compatible with the lego system.
I acquired a used SMX2200RMLV2U and SMX120RMBP2U but only one set of rack ears. This design is sufficient to hold the UPS/battery in the rack as long as its mounted on the APC rail kit. Print in same orientation as UPS configuration…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
This model is compatible with the lego system.
Originally published here: (WIP) Motorola Edge 20 Lite xt2139 case by tato_713 - Thingiverse This is a work in progress, the case could not fit on your phone. This case was designed for the Samsung S20+, including the 4G and 5G versions,…
Preizniet/mutter OEM 853.873.139 Spreizmutter zur Befestigung von Anbauteilen z.B. Grill und Schweller oder Spoiler. passend für: Golf I Cabrio, Mod. 1988-1993 (Kühlergrill) Passat 32B, Mod. 1985-1988 (GT-Verbreiterungen) Polo 86C, Mod.…
You can insert the pliers into the cap with the locking lever deactivated — the cap securely holds the pliers in the closed position. When you take out the pliers, the locking lever is activated by friction. I also designed a double sided…
Its just a 3D Scan from a Mercedes ISOFix Blindplug in the W213. Not a perfect, but a working version
Recommended: requires M6 bolt and nut, minimum 60mm length, for proper mounting (not included).
a ptfe 4mm x 25mm length cutting jig for the 139413-prusa-mini-revo-micro-upgrade. Insert a piece of filament into the PTFE tube before cutting to avoid squashing the PTFE out of shape. make sure to cut the ptfe using a SHARP blade for a…
I wanted to mount a light to my new basket, but all the other ones mounted to the front of the basket. That seemed like it will limit the size of light, or just get in the way of stuff. So here's a side mounted one! The mount area is 32mm…
Simple mount for my UNI-T UT139S multimeter to Parkside pegboard. It should fit on all other models from UT139 series. Easy print, no supports needed. PETG and 3 perimeters recommended. Attach with two M5x8 screws from behind.
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
Provided here are two models, The first file is just the support that can be added to the Fully Assembled 3D Printable Wrench by barspin in your slicer of choice. The second model is an example that I exported from Prusa Slicer. The…
Reinforced handles for XAG B13960S and B13970S batteries (suitable for most XAG p40 v40 p100 p100pro and other drone models). The original handles often break, especially when carrying the batteries. These handles are a practical and…
The multimeter sits securely in the holder. You can rotate the function dial effortlessly without the device wobbling or falling out. There is enough space to wrap your test leads around multimeter. This bracket may also fit other UNI-T…
MHP30 stand for Hakko C1390C Omnivise PCB Holder
Should support up to a 3" wide bike tyre vs the 2.2" with the standard rack. Also slightly longer to help support bikes with a longer wheelbase. I used a Blu Tough resin by Siraya Tech to print this which appears to be quite strong.
ARTE&DISIGN GT139 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Box für https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954 Box for https://www.printables.comdemodel547500-prusa-mk4-tool-holdercomments1391954
An anti-skid bottom plate for the Hakko Omnivise C1390C PCB holder that also prevents scratches on delicate surfaces. The 3D print consists of the bottom plate on which some rubber feet can be glued. These rubber feet can basically be…
Jedná se o osvětlení SPZ VW T3. Číslo výlisku je 251943139. Model je rozřezán na více dílů a následně je slepen. Packy pro zacvaknutí do karosérie jsou tištěny vodorovně, aby se zachovala jejich pružnost. Výrobek je vytištěn z PETG.
Replacement of the little thingy that keeps the spacer for the powder measure (if used with a small powder bar) in place. Fusion 360 file is included. Category: Sport & Outdoors
Courtesy of the Robotic Conspiracy Team 28139 out of Bothell we are publishing our Mecanum Wheel Guards and some other 3D Printed parts we are using on our robot to help other teams! Find our models on Maker World And Printables! Just…
A bracket that, when mounted to the A139 / A139 PRO dashcam, prevents removing connected cables and the SD card.
Luftfilter Schalldämpfer für Chinaroller. Macht das Ansauggeräusch bei Vollgas etwas leiser. Würde je nachdem zu ABS raten, bisher hält das PETG aber sehr gut. Bitte den Innendurchmesser des Schnorchels messen und dann entsprechend im…
Fits Wiha 71397 6 Piece Hex Insert Bit Set and probably other sets. Supports recommended on the overhangs.
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
Záslepka proti úniku vody přes skimmer při vypnuté filtraci.
Recommended: Add double-sided 3M max 1mm thick VHB tape for a stronger, vibration-resistant bond between the rack and mounting surface — improves stability and helps prevent rattling on the road.
Seat Mount, Indian, Part 5139695. Replaces https://www.indianmotorcycle.com/en-us/shop-parts/5139/5139695/
Follow plug tool for cross-style lock cylinders. I used this for a Prime-Line GD 52139. Remove retaining ring, insert key and turn 45 degrees, insert follow plug into cross hatch, push tool against cylinder to remove from the cylinder…
Kann ohne Stütze gedruckt werden.
A UNI-T UT139C wall / pegboard mount for 1" pegboards. If using with a pegboard you will need to use a pegboard anchor such as this: https://www.printables.com/model/410478-pegboard-wall-control-screw-anchors
It's just a simple copy of the IKEA komplement shelf support/pin 139200. Print 100% for better strength. Please, give me feedback on this because I used only once and has been a while.
FLIR for helicopter I am designing, subject to change. The scale of the files is tiny, so if using for animation, scale up to liking. f3d files included.
One Cover of my Tupplur Block-out roller blind broke, so i designed and printed a new one. Print on my Prusa is pretty tight, so maybe make it bigger. Print instructions Category: Replacement Parts Summary One Cover of my Tupplur…
Opened up the hole for Walmart style 29mm lights.
for using with prusa slicer as config baseplate model for printer one detial missing is ribs inside mount .. but only neccisary for reproduction nto for the slicer stl model Print instructions Category: 3D Printer Parts Summary for using…
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
Courtesy of the Robotic Conspiracy Team 28139 out of Bothell we are publishing our intake design and some other 3D Printed parts we are using on our robot to help other teams! Find our models on Maker World And Printables! Just search…
Can-Am (715006097 ) LinQ 30 US Gal (139 L) Trunk Box to Fit without removing rear rack. I bought this box for my atv. It was annoying that it needed to remove rear rack to make this fit in linq system. I made adapters that make it…
KTM 1390 Super Adventure cruise control cover. This cover protects the cruise control button from potential damage. When installing it using 3M double-sided tape , ensure the tape is applied precisely. Incorrect application will interfere…
Hello all you Toyota restorers! Here is a cheap way to plug your frame. Online, the cheapest I could find these plugs is $3 with $20 shipping, so I said NO. Found one that fits a land cruiser, Modded it to fit the Toyota Pickup, and away…
ORGANIZZATORE GT139 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
the subwoofer enclosure fits on a 220 x 220 x 250 build volume in 2 seperate build plates. i made it and printed one to accompany a self made 3d printed speaker set with a mini 2.1 amplifier.
Efficient Skadis mount for UT139C Multimeter. I tried to use multiple hooks and mounts but none worked for me so I redesigned my own. My Skadis Peg Board is mounted on a slope so I needed a fearly sturdy system. This fixture holds up…
Passender Adapter vorn und hinten für Blinker mit M8 Gewinde (Ø 6,8 mm Bohrung)
Hook to allow Tek P6131 & P6139A (not B) probe cables to be coiled out of the way when not in use & hung on probe body.
This is the first version, it's not 100% perfect but good enough for me now, but maybe not to your full expectation :) Need some time, feedback and will do a refinement once I have some time and testing. It's good for me now Maybe it is…
Hier ein kleines Gadget um die Kette zu fetten
I was looking for a way to hang my Uni-T UT139C multimeter on my electronics shelves with a way to store the leads as well. When I came across this wall-holder I had an idea to remix the design to be able to hang it on one of the…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
I have several different sizes with missing drawers, and the drawers from one don't all fit. So I made a model in Fusion that I can resize for each type. This fits the small drawer that I believe came from Harbor Freight but there is no…
This simple holder is designed to be printed in rigid filaments like PETG, PLA or ABS, unlike the original model by @Yurshevich_387032 . Instead of a belt mount it has two holes for screwing the holder to something with M5 rounded head…
Washer lid strike 131390000 touches and activates the lid switch when the lid is closed.
Customized version of https://www.thingiverse.com/thing:2325317 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2325317 Instructions Using the following options: magic_distance = 139 thickness = 3…
Hello, I drew a cover for the Wondom AA-AB31392 1000W amplifier. There are two versions of the front cover, one is both with the Wondom logo and the other has two holes for LEDs, one indicates the on state and the other LED indicates the…
Diese Adapter verschließen die Endrohre der RS22 Schalldämpfer
The spacers in my opener went out, so I fixed it, for next to nothing, 3 hours later. OEM kit is about $10 with 5-7 days shipping. To get them close to the OEM "durometer" or function of the original spacers (soft start on the plastic…
Small organizer. The base plate isn't actually necessary. Fits sleeved cards and allows the lid to close flush.
These files are from the same parametric source project as my 36mm × 55mm × 159mm drawers , and are meant to fit into the same kind of cabinet. I haven't printed a final version of this size yet but will add pictures here when they get…
Original phone holder is not practical nowadays, so I've designed a pretty decent replacement cupholder insert. Printed in TPU 40D.
Under support between mount and existing KTM part is advisable to use 3m double sided tape.
well the door gear broke ... so here is a replacement one that seems to work
Please note that the mic is supposed to be soldered with wires instead of directly onto the board. If you wish to have a version which is suited for a PCB mounted mic, let me know. Requires 4x M3x6 bolts (or M3x8 + washer). Lid is just…
DAM (Deutsche Angelgeräte Manufaktur) made some very high quality, all metal spinning reels in the 1960s and 70s. Their reels are renowned for their robustness, effectiveness, and simplicity of operation. The DQ 1000/1001 were ultralight…
Hiermit ist es möglich eine Action-Cam an der Gabel mittels Klebeband und Kabelbindern zu fixieren
3,4-Dihydroxybenzaldehyde (C7H6O3, CAS 139-85-5) — a free educational 3D molecular model for teachers and students, by MolGod.org. Whatever the filament colour, each atom reads clearly thanks to its engraved symbol. An STL file stores…
A compact, modern and minimalist wall-mounted coat hook, inspired by the classic Hermeta 0139 aluminum coat hook. This 3D printable replacement features a clean, angular design with smooth edges, a rounded upper front corner and a…
I wanted to put this LEGO Question Mark Block on a shelf. The only space which was available was at the very top. In order to display it in a cool way I designed these feet which balance the block on its edge. It is perfectly balanced…
This model is compatible with the lego system.
Update 03/26: I added some cable clips in two designs: USB-C and Coaxial. Hey, i designed a perfect mount for the rear cam of a VIOFO A139 / A229 / T130 Dashcam. [Version for A329 Rear Camera on my Profile!] You can slide the cam in and…
Efficient Skadis mount for UT139C Multimeter. I tried to use multiple hooks and mounts but none worked for me so I redesigned my own. My Skadis Peg Board is mounted on a slope so I needed a fearly sturdy system. This fixture holds up…
Wall holder for WIX_51394XP oil filter. This oil filter fits my CF-MOTO 650 Adventura. The engine oil threaded outlet is 3/4” -16 threads. Yes for a Jap or Chinese bike this is not what I expected. Double check yours. That is what mine…
Passender Adapter vorn und hinten für Blinker mit M8 Gewinde (Ø 6,8 mm Bohrung)
Diese Adapter verschließen die Endrohre der RS22 Schalldämpfer
Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…