2001 BMW Z3 Passenger Side Vent
This is a a replacement for the passenger side vent in a 2001 BMW Z3.
- Pobrania
- 310
- Polubienia
- 44
- Ocena
- 0
198 modeli
This is a a replacement for the passenger side vent in a 2001 BMW Z3.
Use the blank cap for USB Extension
A Vintage Futuristic Look. With 3d printing You Can. Two Version Available Print instructions Print Best with PLA no Support 5% infill For a snug fit, you should scale model so the width of the 3dmodel is same as width of the head. (I…
Here's a dodge ram grill emblem. I've included files to print it in two pieces or one piece. I printed the base in black and the logo in red to match my truck. There's a slight curve, so supports are required touching the build plate. I…
I made this mold for the Crayola Crayon maker from 2001 that my wife had. The original mold had completely deteriorated and replacements aren't available from what I could find. No mold release was needed for the most part as long as the…
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is the cap for the tow hook on the front bumper for Audi A3/A4 2001-2005 B6. Mine is delicately and diligently broken by the tow car driver. So I designed a new one. (Note that the photos are from an older version. The one I uploaded…
Diseño Este modelo 3D del Chevrolet Corsa 2001 capta fielmente los detalles del coche original, centrándose en líneas suaves y una representación precisa de sus características externas. Uso Ideal para coleccionistas de miniaturas de…
The controls on the Audi TT are quite unique in these model years (2000-2006). The climate control system is off when the button is pulled and ‘on’ when the button is pressed matching the other buttons. So ‘on’ is the default state. This…
Originally designed by krashkropp on Thingiverse. https://www.thingiverse.com/thing:4457584 I redesigned to fit perfect for 01-05 civic I printed with PETG. It works. PLA will crack or deform due to tempreture.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed this to wall-mount my Ikea STYRBAR remote for the TRADFRI living room lights and make it sort of match the other light switches and outlets. To mount on the wall, mark out and install two or four diagonal screws at 94mm spacing…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
I recommend printing at the odd angle shown in the attached gcode to manage stresses in the part and reduce overhang issues but YMMV
Can be printed with any material. Print uses Screws. This siren should be compatible with the rotator box for my Tbolt model, but I plan to make it's own rotator box in the future. This siren should be held on the rotator box by friction.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
2001-2007 Toyota Sequoia Side Mirror Gear
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Intorior door handle for Hyundai Coupe/Tiburon/Tuscani GK 2001-2008 Copying the design and printing it was cheaper than buying a new one from dealer, so maybe someone else will have a use for it. For UK and other left hand driving…
Hood support clip for 2001 Subaru Forester. Two versions are available: One that mimics the original where the bar clip and body clip are offset A simplified clip where the two parts are aligned vertically. Print Settings Rafts: No…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I've printed it in ABS as car can get quite hot in the sun, on the picture there is a fuzzy skin option used but printing next time I'd skip that, the effect is not even close to the original facture
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This funnel will assist with filling the engine oil on a 2001 Yamaha YZF-R6 motorcycle. I cannot say for sure if this would fit other motorcycles, but it is fairly narrow and should fit most M27 threaded filler ports. This was printed in…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The model of TMA-1 ( Tycho Magnetic Anomaly - 1 ), a monolith from movie 2001: A Space Odyssey. Model consists of four parts, no supports are needed. I printed everything in PLA but other materials will work. I printed plaque in two…
There are two versions: HAL with a fake "lens" light. With this print, you just need some glue, and maybe a pair of tweezers to place the white lettering if you don't use a filament change. HAL with a real LED light. In addition to the…
This is a dash kit to hold a single din aftermarket radio and 5 round switches. Way stronger version then the ones you will find online for sale. Just slide your radio cage through the hole bend a few tabs to hold it in place and slide in…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Teil des Gelenkes der Dachhaube (40 x 40cm), welche im Zeitraum 1998-2001 in Fendt Wohnwagen verbaut wurden. Meinen Infos nach in folgenden Modellen/Modelljahren: 1998 Diamant 1999 Diamant, Platin, Saphir 2000-2001 Diamant, Platin für…
3D scans of my Wizards of Sorcery, set #2001. At least one model from the standard set was missing and seems to have been replaced in the set I purchased (bought in New Zealand in 1985). Missing the arch mage's spells. I don't own any…
This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices) so I decided to model this "Spannschuh" myself. I used Autodesk Fusion 360 for this purpose and tried to replicate the…
This is a custom siren! It's a dual tone 2001 siren, the chopper port is a 4/6, but if it was a real siren it would be 8/12. You could print the chopper model with the ports separated and could be glued together, or the chopper model that…
Sci Fi Movies - Donnie Darko - 2001 3D printable model.
Band of Brothers - Major Richard Dick Winters - 2001
Band of Brothers - Technical Sergeant Donald Malarkey - 2001
Adapter to mount the GW2001 to a 1.5in pole. Allows the heater cable to be passed though. I've printed in white PLA with a spray UV coating.
Simple drop in cup holder adaptor for large Stanley mugs to fit into the cup holder of a 2001-2007 Toyota Sequoia without falling over. Print in TPU for best results but PETG or ABS will also work.
Sci Fi Movies - 2001 A Space Odyssey - Space Station V - 1968 3D printable model.
Jay and Silent Bob Strike Back - Bluntman & Chronic - 2001 3D printable model.
Band of Brothers - Lieutenant C. Carwood Lipton - 2001
This is a model of the space monolith from the scifi movie 2001. The Edges have a ratio of 1:4:9.
The Fast & The Furious - Vince (Matthew Steven Schulze) - 2001 3D printable model.
Halterung für die Scheiben Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Notes: printed in pla Category: Kitchen & Dining
Printed on Ender 3 Pro. I would suggest printing the two sides seperately even if your printer is big enough for the full model. The sides are made to allow enough leeway that a few mm adjustment can be made without a problem.
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001 3D printable model.
24 - Jack Bauer (Kiefer Sutherland) - 2001 3D printable model.
Band of Brothers - Captain Herbert Sobel - 2001
Trennwand/Trennsteg für Apothekenschrank im Wohnwagen. Einfache Montage. Kann, wenn nicht benötigt, seitlich angesteckt werden. Siehe Bild 2 Da ich nicht die Maße aller Apothekenschränke kenne, habe ich jetzt nur unterschiedliche…
Band of Brothers - Medic Eugene Doc Roe - 2001
This is a great fit for a table or work space for siren enthusiasts.
Scary Movie 2 - Little Hand Man 3D Printable model. Super easy to print, just size to your needs and go!
Band of Brothers - Captain Lewis Nixon - 2001
Iconic Movie Moments - 2001 A Space Odyssey - Hal's Lobotomy - 1968 3D printable model.
The aspect ratio may not match for different holders, you will have to play around with the slicer.
3D Printed Rear Speaker Adapter – 2001 Honda Civic (4-Door) This custom-designed adapter allows for easy installation of aftermarket 6.5" speakers in the rear deck of a 2001 Honda Civic. The adapter mounts to the vehicle using M5 bolts ,…
Seat Toledo 2001-2004 keychain, car have 6 cm/2,362 in width, 0,5 cm/0,197 in thickness. I recommend to use ironing. The best way to attach keyring is by attaching it to one of the wheels. Have fun :)
A mini tornado siren model of a 2001 SRNB. It doesn't scale with anything, just a tiny model. The difference between an SRNB and a SRN/DC is the rotator box. SRNB's have square rotators while SRN/DC's have rectangle rotators Credit to the…
This is a Renault twingo dashboard scan, made originaly for trackday parts making ( right dimensions for fitting) The scan is not "cleaned" it was mainly made for identifiying screws and inserts Done with an Eiscan 2X Pro
Christmas 2001 Tray-packing puzzle by Stewart Coffin (STC #182) Fit all five pieces into the rectangular opening. Christmas 2001 is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't...…
This plug is specifically designed for Dodge, Jeep, and Chrysler vehicles using Mopar part number 4793555 (or equivalent). It fits into the dashboard hole left by the removal of the cigarette lighter providing a cleaner look. The plug has…
Iconic Movie Posters - Lord of the Rings - 2001
Iconic Movie Villains - 2001 A Space Odyssey - Hal 9000 - 1968
Fuel door cover print for 2001 Toyota Corolla. Original hinge was rusted off and this print snaps in place. Printed in PETG (Works in +30C). Prints vertically, requires supports and brim. *Does not latch or lock in place, just works as a…
Band of Brothers - First Sergeant Floyd Tab Talbert - 2001
This model allows you to hang your P20010 on the wall
Hoover Vacuum Piece Button part from Hoover holder - adapter lower hose Uh70211 Uh70212 Uh70215 OEM Part Number 30383200
Band of Brothers - Staff Sergeant Darrell Shifty Powers - 2001
A 2001 lithophane using the iconic scene of Dave Bowman walking down the corridor. I have also included a gcode using 0.15 mm layer heights using my settings. Supports shouldn't need to be used if placed on bottom face but if you are…
A mini tornado siren model of a 2001 SRN/DC 1st Gen or called a 2001 Round Back. It doesn't scale with anything, just a tiny model Credit to the people who took the irl pic of the 2001
This is a set of transfers and photos for the EVA Pod from Bouncy Monkey. Simply print the 2001 Pod2.png at 100% on 8x10 photo paper and the smallest image should be the right size for the pod. Then print Transfers.png on Clear Waterslide…
Blokada rolety Dometic Rastrollo 2001
Hello, 2001 space odissey toy figure. Happy printing
A mini tornado siren model of a 2001 SRN/DC 2nd Gen. It doesn't scale with anything, just a tiny model. The difference to a 2001 2nd Gen and a 2001 4th gen is the cone in the middle of the horn Credit to the people who took the irl pic of…
No supports needed, print in PETG.
Both poverty buttons were gutted by the previous owner to fit a switch each. Switches now don't work, left with gaping holes Did some CAD to replace the empty slot and fit a toggle button on the other side. 2 Options: “Empty” - just a…
A vented engine cover for Yamaha Zuma (prebug 1989-2001) Made in Blender, blend file included. Category: Automotive
A mini tornado siren model of a 2001 SRN 4th Gen. It doesn't scale with anything, just a tiny model Credit to the people who took the irl pic of the 2001
In additition to the .stl here, you will need most of the parts from Marcelo Martinez' model “2001 firetv”, which you can find here: https://www.printables.com/model/494882-2001-firetv Here's what you do: - You print all the Apes and the…
This model is compatible with the lego system.
Monolith based on the 1968 Stanley Kubrick film, 2001: A Space Odyssey. Take into account the skull size when scaling to print. If too small they will only print as small round balls with no detail.
Trail Tech Vapor Digital Gauge Mount for Yamaha Zuma (prebug 1989-2001). Blender file included. Category: Automotive
A mini tornado siren model of a 2001-130 or an 2001 Equinox. It doesn't scale with anything, just a tiny model. The horn doesn't have the detail on the back of the horn to show a difference because I want these models to be simple. The…
Should friction fit, but better with a M2 threaded insert and a M2x8 grub screw. Should be printed upright, with supports on build plate only for the hole
As the description says. Print as oriented from PC, ABS, or PC/ABS blend, GF is a plus.. .2LH or smaller. 6 walls, 30% triangle infill.