236 modeli
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Pièce porte bouteille ou porte journaux se situant sur la porte de la cellule d'un camping-car Eura Mobile de 2011 Print instructions Impression en PLA, mais peut très bien être imprimé en Pet-G, ABS ou CPU. J'ai mis une jupe donc il sera…
this is a divider for the original storage in the armrest. to divide the storage compartment en can holder. made for a Mercedes C180 from 2011 w204. Gcode is for printing with 0.15mm layer hight PETG. Print time 1:23 with prusa mk 2.5s i…
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
I printed it with 0.6mm nozzle and 0.3mm layer heights in PLA and it worked fine, it doesn't damage any of the pins and keeps them covered. I made this quickly so it's not perfect, but it does the job
Remixed an older design from Discobanan since the original had a lot of friction for me. Safely store your precious Xeons (and Desktop CPUs)! Best printed as the STLs are already orientated.
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
I wasn't about to pay springfield or another company $50+ for a +3 magazine base pad extension for my Prodigy DS 17-round mag, so I designed my own in fusion from scratch. Currently uses M3x4 heat set inserts I grabbed from microcenter…
My center console (underneath the shifter) was a mess and needed something to organize it all. Specifically, I wanted something for coins as they would always get shoved into a cup holder and rattle around. I found some great examples…
Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…
This is a 2011 Dacia Duster, it has been custom modified for 3d printing and prints pretty nicely Happy printing! link to original: 2011 Dacia (Renault) Duster - Download Free 3D model by razor24 (@razor24) [30bc2e0] (sketchfab.com)
uses standard mounting holes for most frame mount sights, has “love & peace” inscribed from the show Tri-gun.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
There are two options, the first is a copy that can be bought for example on Aliexpress, but for my top flow cooler it did not fit, one wall interfered, so in the second version it was removed, but the rigidity of the structure was not…
Custom STI 2011 9 x 19 Base Plate If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Never be caught short again with my versatile coin and contactless payment holder. Designed specifically for Ford Fiesta 2011 owners, this compact accessory features a secure coin compartment to keep your parking fees organized. The…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You will need to print two of these to mount the cooler. This uses the hardware that is included with the kit. All you will need to do is secure the clips to the print. The cooler used can be found on amazon here Pick the cooler that…
Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
MIKROTIK 2011 / 4011 - series - holder RACK 19''
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This model is a simple but very useful magazine holder for all double stack 9mm and 10mm i could test it with. This includes 2011 magazines.
UPDATE: I cut the model so that that it is out of the way key to ensure that the original key is making OEM contact with the car. This is to fix where the plastic breaks off where it connects to a key ring. First, file or sand the top of…
ssogaard 's Oil funnel remixed for 2011-2014 F150 5.0. Funnel is keyed to match oil cap.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A simple adapter to mount an SSD hard drive in Apple iMac 2009-2011. Printing time approx. 31 minutes 8 grams of filament Category: Computer
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a tray for Intel Xeon CPUs of Ivy Bridge & Sandy Bridge (Xeon E5-26xx and their v2/v3/v4 variants), and some Haswell & Broadwell. It may fit other CPU models too! Check your CPU dimensions: if it's 45x53 - it will fit! UPDATE:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Needed a replacement grommet for my 2005 Ford Focus. This one was almost exact, so with some minor changes this fit perfectly. You may need to file the nodule off the prop rod to make it fit, or file the grommet slightly so it can slide…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a sabot that is used for traditional hunting with black powder rifles. It creates a gas seal between the barrel of a muzzle loader and the bullet/Ball. Instructions Print it. Use it, or just show it off. Category: Other
A cover box to store Intel CPUs with the LGA 2011-3 socket.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
No support required, ideally should be printed with ABS. Was using 6 pc. M4x15 bolts, 4 pc. M4x18 bolts, 6 washers and two M4 nuts to attacht this to dual cpu motherboard.
Festool is very innovative in the further development of its tools and their details. Therefore, here is another anti-tilt for mitre cuts with the FS 55 EBQ and the FS/2 rail. Suitable for the 2011 model of the TS 55, which was the last…
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Drop in grip safety block for 2011s, No permanent modifications required just drop in on top of your mainspring housing behind the grip safety tails over top of the hammer strut and reassemble. no need to pin your safety using this PETG…
2011 competition style follower to add plus one. Does NOT lock back.
Want a manual style shift knob in your automatic mk6 or mk6.5 VW? Look no further! Shift knob adapter for automatic style transmissions to adapt a different, or in my case, more comfortable shift knob. Simply pull the shift knob…
Gridfinity Inserts for Intel Xeon (Scalable) CPUs with Sockets 2011, 2011-3 and 3647
This is for a third generation Toyota Sienna. 2011-2020. It will fit in the lower console to allow for phones, chapstick, dvd's, etc.. We had a Honda odyssey with so many more cubbies and this just helps us out with organization.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Used to avoid damage to socket pins when no CPU is in the socket (shipping, etc)
ENGLISH I lost the original control cavity cover on my 2011 Gibson Les Paul Studio. After realizing that replacement covers available online are either overpriced or don't fit the Studio model properly, I decided to make my own. The model…
These should fit all the various mags made by Checkmate. I've tried it on Live Free Armory and MasterPiece Arms mags 126mm/17 round mags and it worked for both. If you try it on some other one let me know and I'll update this page with…
My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…
An emblem replacement for 2011-2014 Chrysler cars
I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer
I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…
When changing a CV axle in a 2010 ford focus I damaged my axle seal. I thought this would be an easy swap, but little did I know Ford used the worst seal design I've ever seen. After trying 2 times and ruining 2 seals, I looked online for…
Ram air intake for Yamaha TMax 2008-2011. It is held by two pre existent screws in the front fairing. Has connection for a 34mm hose. To be printed with the hose connections facing the printing bed. Supports required at the hose…
Thermalright Peerless Assassin 120 mount for LGA 2011. Printed in PLA+ so results may vary. 50% infill (a few grams different than 10%) I'm using a Xeon E5 2630-V4 that I know doesn't get hot with this cooler. Is there a valid reason for…
I designed this bracket to replace the original 3.5" hard drive in my 2011 iMac with a 2.5" SSD, while retaining all of the original Mac hardware. The drive bay uses a 6/32 pin on one side and a screw bracket on the other. I specifically…
My center console latch broke, so I 3D modeled this replacement for it to save $9. It is a drop-in replacement for the original part. I simplified the organic curves on the OEM part to make modeling easier, but it still fits and functions…
I had an old Amazon Fire tablet (2011) lying around. I converted the tablet into a picture frame. I designed everything in Fusion 360 (I'm a beginner). So I could make the device look like a real picture frame, I used HATCHBOX wood…
Silhouette / Silueta BMW F30 335I con medidas 52.4 x 12.6 x 3 cm
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
Western Movies - Cowboys & Aliens - 2011 3D printable model.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece.
Iconic Movie Moments - Harry Potter vs Voldemort - 2011 3D printable model.
The LTT design for the 20xx cpus works well for the E5 v1 and v2 chips as the IHS is perfectly square. However the v3 (2011 v3) CPUs have little wing extensions to the IHS that interfere with the design. This model simply has an extra cut…
Was tired of my soda cans or any cans of that nature flopping around in the one size fits all insert that ford has inside their inserts for the center console. Couldn't find anything remotely close or anything for my truck so I decided to…
Simple DIN rail holder for router Mikrotik RB2011 nad similar (with similar mounting)
Pins for the side trays below the "floor" of the trunk on a Subaru Legacy Outback 2011 (4th gen). Tested on a European Outback 2011 2.0D (diesel engine) model. I assume it is the same across all variants of the same year at least though.…
Print with what color combination you want. Lighter colors for Snake Eye. Darker for Eye Center. This is my first design
Another useless and ugly accessory for fiat panda. (third series, since 2012) Parts: Cup Ring, to be pasted over cup Top. 4 mm metal pin Cup and ring parts have been separated to avoid the supports Beware of the size of the hinge,…
I bought an older SuperMicro server motherboard off ebay and it came with a low-profile 1U heatsink, which depends on airflow from some very loud fans, directed through the fins by the close-fitting top of the server chassis. Since I put…
Hennessey Venom GT 2011, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
what's that ⬝ ABOUT The measurements work for STI Combat Master 2011 ASG Airsoft GBB Replica An infill of 15% is way enough. Onshape file settings ⬝ PROFILE Prusament PLA 0.40mm nozzle 0.20mm layer height SPEED profile 15% grid infill…
I printed this out of PLA and when I checked after a drive it became super flimsy. Don't use PLA. I printed it in PETG in October of 2024 and I'm still driving on that sucker (Feb 2025). Fits nice. I was fortunate enough to recover the…
Cup holder "rubber" tab gaskets for a 2011 Volvo S40. The original rubber tabs for cup holders in older cars often get brittle and break off. Printed with 95A TPU at 100% Infill. NOTES: Print 2 of each part. The parts are 1.5mm high. If…
This is the support peg for the trunk cover on a Subaru Legacy Outback 2011 (4th gen). This is for the spring loaded side (right side). The shape is the same on the opposite side except the shaft would be different (larger diameter, no…
A tray to store six Intel CPUs with the LGA 2011-3 socket.
BGE623 Side Mirror Repair Gear 876101U060, 876201U060 for KIA Sportage Sorento 2011-2016 Sonata 38-Teeth Outer Diameter:32.40 mm
iMac 21" 2009-2011 Webcam Cover
Center cap replacement for 2006–2011 Honda Civic alloy wheels
Loosly based on STI 2011 grip module.
A 2010 - 2013 Mazda 6 model, made to be printed at a standard Hotwheels scale (though it should scale fine). Included are some simple 5 spoke wheels (if you wish to use your own, keep in mind that anything over 3mm in depth will not…
I designed this set of diffusers to fit directly around the bumper of a Toyota Camry between the years of 2007-2011. Make sure to apply a couple coats of clear coat to protect it from the weather. I applied it with JB Weld and magnets to…
This is almost the same design as the bracket ( 076-1386 ) used when the CTO option's Apple SSD is inserted. The SSD and Housing fixation use the 2.5-inch drive screws used in regular computers (Very important! It should be for 2.5…
Printed at .2 layer height and 15% infill. No supports should be needed, if you have issues with the overhang, just reduce bridging speed significantly v6 Updated for extra wide (ex. Xeon E5-2697 v3) and all other LGA2011 CPUs
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
This is a windshield washer fluid cap for a 2011 Cadillac CTS. The cap may fit other Cadillac years and models.
I like all of my magazines to be the same length when on my belt so I created these extensions. The “lock” replaces the factory part and accepts a #5 x 5/8" screw. There is no additional capacity added to the magazine, just an increase in…
This is is for the (pre-facelift 2010 and 2011) Mercedes-Benz W212 E350 I was laying my phone in the cupholder. This one props it up at a better angle. It is a donut so you can run the cable underneath. The phone slot lines up with the…
I didn't find any adapter suited for the setups I usually do so I made this one. It is minimalist, can be printed on the tiniest printer and does not need support. It can handle up to 2 ssds (in place of the 3.5" spinning drive),…
The new mounting holes should be pretty universal, if the mounting latches of your new speaker are too wide, you can add a negative modifier in Prusa Slicer adjacent to the existing cutouts I have put into the model. The holes for the…
Extended mag catch buttons for 1911/2011 style of pistols. Holes are sized to accommodate a #4 screw. The normal button is flat at the underside and can be used on mag catch of different sizes. The reinforced button has extra materials…
I have designed this because I needed a plug since my wiper was defective and replacement motor was late :) If you like it without the wiper than this one is perfect fit. If you want you can use a screw and a washer from inside to prevent…
These are Replacement feet for the Unibody Macbook Pro from Late 2011. For the different corners you need to cut a little bit off the model in the slicer. When looking from the bottom, the top right needs the shortest stump, the bottom…
Mikrotik 2011 holder 10'' rack. Holder for 2/3 U positions Category: DIY
