Wyniki wyszukiwania: 2020

Sortowanie

3747 modeli

P
PrintablesPaul Arden

2020 Extrusion Zip Tie Clip

A zip tie cable clip for insertion into 2020 aluminium extrusion. There are quite a few options in around but none quite like what I wanted. Printed with PETG since they require some force to insert (so that they sit solidly in the…

Pobrania
5707
Polubienia
1217
Ocena
4,78
P
PrintablesRaschmaschine

Drop-in T-Nut 2020 / 2040 extrusion | M3 nut insertion | Ender 3

This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…

Pobrania
2906
Polubienia
409
Ocena
4,73
P
PrintablesCG Muffin
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1222
Polubienia
255
Ocena
5
P
PrintablesMateusz Tokarz

V-Slot 2020 Internal Corner Connector (Reinforced)

This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…

Pobrania
320
Polubienia
112
Ocena
4,67
P
Printablesrahix

I-Type 2020 Extrusion (5mm slot) M5 Tap Guide

This is a guide for tapping an M5 thread into the end of I-type 2020 aluminum extrusions. These are the type with 5mm slot width. The model was inspired by existing designs like this one:…

Pobrania
256
Polubienia
50
Ocena
5
P
PrintablesObtuse

Better Macbook Air Stand 2018-2020 (M1)

A MacBook stand to combat turtle neck. More sturdy and stable than the original "MacBook Air Stand 2018-2020 (M1)". Works with MacBook Air 2018-2020 models. I recommend setting the internal fill to 100% in the area where the laptop is…

Pobrania
242
Polubienia
32
Ocena
5
P
PrintablesBasementLAB

2020 Leveler Pad for Aluminum Extrusions - Stabilizer - with Leveling Mounts M6

2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…

Pobrania
223
Polubienia
69
Ocena
0
P
PrintablesMateusz Tokarz

V-Slot 2020 Open-Side End Cap (3-Slot Fit)

This is a snap-fit end cap for 20x20 V-slot aluminum extrusion profiles with one open side . It fits securely into three V-slot channels and the center bore , while keeping one full side open for uninterrupted access to the rail, belt…

Pobrania
216
Polubienia
76
Ocena
5
P
PrintablesDanol

DNL Sencor Scooter 2020 Mudguard

NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Mudguard/fender for the Sencor Scooter 2020 e-scooter. Might work on other models as well, I'd be very happy if you tested it out and let…

Pobrania
185
Polubienia
25
Ocena
5
P
PrintablesREMLURELMI

Honda Ridgeline 2020+ Transmission Park Release Tool

Update: R2 version has an arrow pointing in the direction to move the tool to reach Neutral (N). This model is a tool to manually release the park pawl on a ZF 9HP transmission, used on 2020 or newer Honda Ridgelines. A ½ inch ball valve…

Pobrania
157
Polubienia
12
Ocena
0
P
Printablesdigbat

MMU2S Tube Guide 20200222

A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. Tested in PETG 0.15 layer height…

Pobrania
139
Polubienia
23
Ocena
5
P
PrintablesJacksonRay2

Iphone 7, 8, and SE2020 Hexagon Case

Iphone 7, 8, and SE2020 case that should be printed with solid materials like PETG or PLA . I recommend PETG as it provides just a bit of flex to the case which can help with getting it on and off. PLA will work just fine just be careful…

Pobrania
106
Polubienia
3
Ocena
0
P
Printablesredangel1984

GT2 Belt Tensioner for Drawbot & 2020 Profile Laser Engravers

It's exactly what the title says. If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 You just need: 1x M3 Square Nut (trimmed like in the pic and) 1x M3 Screw of your desired length…

Pobrania
101
Polubienia
23
Ocena
0
P
PrintablesCopyRited

Audio Technica AT2020 Mic Stand

I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…

Pobrania
85
Polubienia
9
Ocena
0
P
Printableskull

Dune 2020 Gom Jabbar Stand

Display stand for Trekkie's Gom Jabbar model (scaled to 160mm) labeled in Orthodox Herbertarian font . This is my first model, so I'm afraid I used primitive Harkonnen techniques (TinkerCAD), but it's functional. Photos are of a quick…

Pobrania
76
Polubienia
19
Ocena
0
P
Printables3DOM

Dell XPS 9700 (2020) Riser / Ventilation Feet (v3.0)

Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…

Pobrania
58
Polubienia
11
Ocena
4
P
Printables3DJay

2020 aluminum extrusion 90 deg connector

90 degree corner for 2020 aluminum extrusion. I used this for my diy printer.

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesSmelliot

Ender 3 / 2020 Extrusion Diagonal Spool Adapter

Originally, my Ender 3 sat on a shelf with a restrictive height so I could only mount the spool holder directly onto the side of the extrusion frame, losing me 80mm in usable Z height (250mm down to 170mm). This design works by allowing…

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesNutMunky

Atlanta United FC 2020 Spike and Coin Holder

Spike and Coin holder for Atlanta United FC 2020 season ticket holders. Update: added freestanding version. Print instructions I printed the two pieces separately using PLA. Then used a glue stick to attach the logo to the wall. The coin…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesDušan Saiko

Mac Mini M1 2020 držák na stěnu

Tisk 0.2mm, jakýkoliv materiál, bez podpor.

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesSkinnyBuddah

Samasun Galaxy S8 Phone mount 2020 extrution

Needed a way to mount a Galaxy S8 to my delta printer for use with Klipper Screen. You may get away with printing only 1, however for stability at higher speeds and to keep everything tight on the printer, best to print 2. I've mounted…

Pobrania
21
Polubienia
3
Ocena
5

2020 - Hook for square tube - Haken für 4-Kant Rohr

Made a hook to fit on 20mm x 20mm square tubes or profiles. Use some double sided tape or play-doh to prevent slipping. Works very well for lighter objekts. Haken passt auf 20mm x 20mm Geländerstäbe, oder sonstiges mit dem gleichen Mass.…

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesargoroots

Stand for IKEA VINTER 2020 christmas trees

Made replacement stands for small IKEA christmas trees (304.668.13). Originals look like bath plugs: https://www.ikea.com/se/sv/p/vinter-2020-dekoration-set-om-3-julgran-groen-30466813/

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesIllimar Rekand

Microphone mount + collar (AT2020)

I bought a used AT2020, but part of the mount was missing. This mount has a 3/8" thread, and you will need a M6 bolt + nut to fasten the mount. I also needed to remodel the collar which fastens the bottom of the microphone, which is…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesMavis1975

2020 extrusion 10kg spool rollers

needed to make an 10 kg spoolholder so i took an proven spoolholder system and made it more my wishes. incl an sort of brake because an 10kg has quit an momentum….. added an extra holder for the 2020 I got the bearings from here:…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesJL

FCU panel letadla A320 pro Microsoft Flight Simulator 2020

Model panelu FCU letadla Airbus A320 použitelný pro Microsoft Flight Simulator 2020

Pobrania
2
Polubienia
5
Ocena
0
P
PrintablesRichard M

Voron 2.4 Filament Latch (or any 2020 extrusion)

Printable quick release latch for panels on 2020 extrusion This is originally inspired by a youtube video - https://www.youtube.com/watch?v=6p7M18oPn3k A recent review video on YouTube by Maple Leaf Makers Another user did a review of the…

Pobrania
22 350
Polubienia
1469
Ocena
4,93
P
Printablesmce076

Corner Brackets For System20 2020 / 2040 Extrusion

These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…

Pobrania
21 190
Polubienia
9910
Ocena
4,93
P
PrintablesDET-Man

Modular Cable Management Clips for 2020 Extrusions

If you are looking for a solution for your cable management that is functional gives your Voron a clean look (that it clearly deserves 😎) is flexible, easy to handle and modify Maybe this is something for you! What I use the clips for:…

Pobrania
16 497
Polubienia
760
Ocena
4,6
P
PrintablesDET-Man

JST Hub for 2020 Extrusions - Wiring Bed Fans, LEDs and more!

When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…

Pobrania
14 025
Polubienia
368
Ocena
5
P
Printablesrandom.ae

Sturdy Print-in-place Panel Latch for 2020 Extrusion - Voron Panel Clips

I needed something like a panel-latch for a not-a-voron. I was using RichardM's Voron 2.4 Filament Latch on my Voron. I thought about modding his for my purpose, but decided to re-implement it myself and make some improvements. Heavily…

Pobrania
12 263
Polubienia
264
Ocena
5
P
Printablesgeektoybox

2020. 2020-R, 2040, 3030, 3060 Aluminum Extrusions

Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included. New 2020-R Extrusion! Please don't forget to like the model if you find it useful. Thanks!

Pobrania
9405
Polubienia
626
Ocena
4,91
P
PrintablesBasementLAB

Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1

Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…

Pobrania
6386
Polubienia
1965
Ocena
4,85
P
PrintablesStarrEngineer

Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, ...)

This is a port of https://www.thingiverse.com/thing:2503622 , by mightynozzle. I do not claim ownership of the model . I had a hard time finding something like it on printables, so I ported it here. The following text is taken straight…

Pobrania
3795
Polubienia
846
Ocena
5

Extruded aluminum profile 2020 2040 3030 4040 4080 8080 with T-nuts

Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…

Pobrania
3646
Polubienia
1017
Ocena
3,5
P
PrintablesShaun Doe

2020 cable clips (T-slot & V-slot)

Various cable clips for 2020 extrusions, for use with zip-ties. Fits both T-slot and V-slot. If you are using V-slot extrusions, the original (V-slot only) ones these are based on could be more interesting: cable_clip_horizontal…

Pobrania
3445
Polubienia
500
Ocena
4,81
P
PrintablesVesh

2020/2040 Extrusion Cover / Cable Channel

perfect fit for 2020/2040 Extrusion (Openbuild/Ratrig) BearFrame Cover / Cable Channel. haven't found any that would actually fit snug, so i made one myself. it fits perfectly, is flush to the surface and has about 3mm room behind it to…

Pobrania
3423
Polubienia
282
Ocena
3,82
P
PrintablesTechbeards

MGN9 & MGN12 Linear Rail 2020 Alignment Tools

Here you will find really basic alignment tool for 2020 profile with the MGN9 & MGN12 linear rails. Proper alignment of linear rails especially on a 3d printer is VITAL to help give your 3d printer the best chance of both working &…

Pobrania
3196
Polubienia
131
Ocena
5
P
PrintablesDeclanD_

2020 Extrusion Cable Clips (Flush and Guide)

Simple cable clip design, one clips into the extrusion and extends out, while the other is flush and routes the cables inside the extrusion.

Pobrania
2935
Polubienia
196
Ocena
4,86
P
PrintablesPaFcio

2020 Extrusion V-Slot Cover

Could not find a model for 2020 extrusion slot cover so designed it. Optimized for 0.4 mm nozzle Base layer height 0.2 mm “Wings” to be printed with lower layer height to aid strength (0.7 mm and up set to 0.1 mm) 20 cm length to fit on…

Pobrania
2848
Polubienia
193
Ocena
4,31
P
PrintablesEB3D_Printing

90 Degree Bracket for 2020 Extrusion for Ender-5, Pro, Plus

This is a remix of: https://www.thingiverse.com/thing:3644062 I liked the design of the original bracket, but wanted to try and make it a little smaller. This design is about 50% scale of the larger bracket. Included is both a 2 bolt and…

Pobrania
2787
Polubienia
468
Ocena
5
P
Printablesnanuk

Vslot 2020

Vslot 2020 Vslot 2020 profile includes a .f3d file to be able to use the object as a base for larger projects. Ideal for use during the design of parts that have vslot or are anchored to it. El perfil de Vslot 2020 incluye un archivo .f3d…

Pobrania
2705
Polubienia
779
Ocena
5
P
PrintablesBasementLAB

2020 Extruded Aluminum - Profiles Collection

2020 Extruded Aluminum - Profiles Collection - Parametrico/Parametric - Adjust the Z scale to obtain longer profiles Available in 5 variants: 2020 4 Sides Open 2020 1 Sides Open 2020 2 Sides Open (90°) 2020 2 Sides Open (180°) 2020 3…

Pobrania
2663
Polubienia
1017
Ocena
5
P
PrintablesORM

T-nut for 2020 aluminium extrusion profile

This is a complete pack of T-nuts designed for the assembly of 2020 aluminium profiles. This pack contains a variety of T-nuts for different applications. There are T-nuts for different sizes of screws, and there are T-nuts with…

Pobrania
2406
Polubienia
755
Ocena
4,9
P
PrintablesPsych0h3ad

VORON 2020 Aluminum Profile Cable Clip

Tag me if you printed~~~!!! Twitter https://twitter.com/YuTR0N

Pobrania
2334
Polubienia
408
Ocena
4,95
P
PrintablesSteveJohnsen

2020 T-Slot Bar (like aluminum extrusion)

This is a square section of 2020 T-Slot bar or rail (like extruded aluminum). Its dimensions are 20 x 20 x 20 mm. To use it, one would stretch or shrink the height of the model to the desired length. Being made of plastic filament, it is…

Pobrania
2269
Polubienia
144
Ocena
5
P
PrintablesHenryA

Voron Chamber Thermistor Mount 2020 extrusion

This model is a remix from Maple Leaf Makers and the excellent V0 chamber thermistor mount. Just adapted to the 2020 extrusions fitted for the Voron 2.4/Trident . BOM 1x M3x8mm BHCS/SHCS 1x M3 T-Nut 1x 3x15mm thermistor

Pobrania
2214
Polubienia
296
Ocena
4,96
P
PrintablesRudy Martin

Aluminum Extrusion 2020

Aluminum Extrusion 2020

Pobrania
2134
Polubienia
303
Ocena
5
P
PrintablesAvvarshn

2020 Profile Corner Bracket

Did not want to uselessly buy corner brackets, these ones are exceptionally strong (especially since they are printed with 4 walls). I am using mine for my DIY 2020 system laser cutter. I have found that w/ 4 walls, these make a PERFECT…

Pobrania
2087
Polubienia
259
Ocena
4,94
P
PrintablesCL Performance

Aluminium Extrusion Profile 5 6 8 with dimensions 2020 3030 4040

Für alle deutschen Nutzer habe ich hier noch ein Video gemacht, wie ich einen Unterbau für meinen neuen 3D Drucker erstellt und gebaut habe. Vielelicht inspiriert es ja den ein oder anderen. For all english users, the following youtube…

Pobrania
1976
Polubienia
573
Ocena
5
P
PrintablesRolohaun Design

Rook 2020 MK2

Welcome to the Rook 2020 MK2 3D Printer Kanrog who is part of the Rolohaun Design helped created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook 2020 MK1 , the frame now uses blind joints,…

Pobrania
1974
Polubienia
398
Ocena
5
P
PrintablesRolohaun Design

Rook 2020 MK1

THIS IS AN OLD OUTDATED VERSION, NEW ONE HERE Welcome to the Rook 2020 MK1 3D Printer Kanrog who is part of the Rolohaun Design team created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook…

Pobrania
1953
Polubienia
413
Ocena
5
P
PrintablesBasementLAB

2020 2-Way 90° Corner Profile Connector

2020 2-Way 90° Corner Profile Connector Update 04/05/2025: added RV1 Geometries clean-up, fit tolerances for smoother assembly Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile…

Pobrania
1906
Polubienia
810
Ocena
5
P
PrintablesIatraliptes

Wago 221 412 413 and 415 double / triple and single / double lined connector for 2020 / 3030 extrusions

Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…

Pobrania
1897
Polubienia
199
Ocena
5

2020, 2040, 2060, 2080 Extrusion Scalable

Collection of 2020, 2040, 2060 and 2080 extrusions. The model is 1mm in the Z-axis so it is easy to scale it to wanted length. Also included the .dwg file if you want to make changes to the model. Category: 3D Printer Parts

Pobrania
1816
Polubienia
149
Ocena
5
P
Printablescbearman

MGN12 Alignment jig for 2020 and 3030 extrusions

Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…

Pobrania
1809
Polubienia
86
Ocena
4,83
P
PrintablesTrocheHole

Drill Guide for 2020/3030 Aluminum Extrusion Profile

Drill guide that can be securely fastened to 2020/3030 aluminum profiles. Durability is enhanced by using metal pipes together. The STL files are designed for 5mm and 7mm drill holes , but the hole sizes can be customized by using the…

Pobrania
1790
Polubienia
591
Ocena
5
P
PrintablesPsych0h3ad

Annex modified 2020 Enclosure clip

Try one corner clip if it works for you.

Pobrania
1781
Polubienia
297
Ocena
5
P
PrintablesRyan Smith

LEGO Speed Champions Wall Mount (2020-Current)

Hello, this is my first model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand. I designed it using a hole large enough for a screw and to be attached using a drywall…

Pobrania
1780
Polubienia
61
Ocena
5
P
PrintablesBasementLAB

2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile

2020 3Ways Connector CUBE Corner Bracket for ITEM 2020 Profile Available in two versions: Blank M4 Treaded Suitable for: https://www.item24.com/en-il/profile-5-20x20-natural-37003#description All our designs are free to download and use.…

Pobrania
1720
Polubienia
1072
Ocena
4,71
P
Printablestato_713

Apple iPhone 6 & 6s & 7 & 8 & SE 2020 case

Originally published here: Apple iPhone 6s & 7 & 8 & SE 2020 case by tato_713 - Thingiverse For the regular iPhone 6 Plus, 6s Plus, 7 Plus and 8 Plus, see this . This case was tested only with the iPhone 6, 6s, 8 and SE (2020), but it is…

Pobrania
1705
Polubienia
79
Ocena
4,84
P
PrintablesFreshPrints

Bambu Lab Anti-Vibration Feet for All 3D Printers FDM 2020 4040 frame, Anycubic Prusa Sovol Elegoo Voron Creality

These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…

Pobrania
1699
Polubienia
407
Ocena
4,93
P
PrintablesHessenDnD

V-Slot 2020 20x20 Extrusion End Cap

Push in end cap for V-Slot 2020 Extrusion, 20x20 Extrusion.

Pobrania
1696
Polubienia
170
Ocena
4,75
P
PrintablesBasementLAB

T-Slot Nuts "ITEM 2020" Spare part

T-Slot Nuts "ITEM 2020" Spare part M3 Thread / Standard-Flat M4 Thread / Standard-Flat M5 Thread / Standard-Flat Suitable for: Profile 5 20x20 Dimensional Tolerance Advisory Please be advised that final print dimensions can vary due to…

Pobrania
1679
Polubienia
944
Ocena
4,78
P
Printablesripper

Strong corner bracket for 2020 aluminium extrusion - 5mm slot

Modified for 5mm wide slots, otherwise it's the same model. prints without support, and works best in PETG

Pobrania
1651
Polubienia
348
Ocena
5
P
PrintablesBasementLAB

2020 Heavy Duty Sturdy Door Handle

2020 Heavy Duty Sturdy Door Handle Overall dimensions: 20x45x140mm Suitable for:

Pobrania
1611
Polubienia
638
Ocena
5
P
Printablesmt_benno

2020 BMW S1000RR

This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.

Pobrania
1569
Polubienia
38
Ocena
0
P
Printableshackerbijay

V Slot Gantry Plate for 2020 extrusion

V Slot Gantry Plate for 2020 extrusion with 5mm holes. Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: self made PLA 1.75 Gray Notes: V Slot Gantry Plate for 2020 extrusion. stl of V slot…

Pobrania
1545
Polubienia
126
Ocena
5
P
Printableschking

2020 Endcap

Another endcap for 2020 extruded aluminum

Pobrania
1509
Polubienia
216
Ocena
4,73
P
Printablescimoalpacino

Prusa Bear 2020 Spool Holder - Quick Change

I've remixed the original STL so you don't need additional screws for the holder. Just slide it in and you're ready to go. Print instructions Category: 3D Printer Parts Summary I've remixed the original STL so you don't need additional…

Pobrania
1469
Polubienia
242
Ocena
4,96

2020 Toyota Supra

This is a high poly replica of the new 2020 Toyota Supra modeled in Blender over about 43 hours. Parts optimized for 3d printing are coming soon! Update 1- 3D printable files are available for a 1/16 scale model. Print instructions…

Pobrania
1440
Polubienia
120
Ocena
4
P
Printablessapencil

Creality Ender 3 Direct Drive Spool holder (2020 Extrusion)

this is a custom spool holder i designed for my printer after i converted it to direct drive. the spool cylinder is made to fit most 1kg filaments and can be on either side of the main body. Print instructions can be printed at high layer…

Pobrania
1425
Polubienia
169
Ocena
4,87
P
PrintablesIR Blinx

Modern Xmas Tree 2020

Solid model, ideal for printing in Spiral Vase mode or just hollow (0% infill) with a couple of perimeters updated the stl as the orientation was sending me crazy :-)

Pobrania
1422
Polubienia
310
Ocena
4,98
P
PrintablesBasementLAB

T-Slot Framing Structural Brackets 2020 / 3030 / 4040

2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…

Pobrania
1402
Polubienia
256
Ocena
5
P
PrintablesBasementLAB

2020 T-Slot V-Slot Nut - M3 / M4 / Double Thread RV2 - Inserto per profilo 2020 filetto M3 / M4 / Doppio

2020 T-Slot V-Slot NUTS - M3 / M4 / Double Thread RV2 - Inserto per profilo 2020 filetto M3 / M4 / Doppio Suitable for: 21/04/2024 Added Double Version 17/08/2024 Update 03/06/2026 UPDATE RV2 All our designs are free to download and…

Pobrania
1384
Polubienia
189
Ocena
3,5
P
PrintablesErnumseTremWege

2020 profile

2020 profile, interchangable with normal aluminium extruded 2020 profile Change length by adjusting one of the X/Y/Z axes

Pobrania
1378
Polubienia
105
Ocena
5
P
PrintablesRemiRafael

Cable clip for 2020 Vslot profile

This design is a remix from hanz_grau's cable clip: https://www.thingiverse.com/thing:4992551 This version is for 2020 profiles (Vslot and normal profiles). Elephant feet's (first layer overextrusion) tend to impede the part from clipping…

Pobrania
1366
Polubienia
225
Ocena
4,92
P
PrintablesOtann

Wago 221 412 413 and 415 mounts for 2020 extrusion

Wago mounts I needed a mount with two sections so I could join multiple fans on tha same line for The Filter project, while original had only three sections variants. I also chaged the model cosmetically a bit. Wago Splitter I've also…

Pobrania
1352
Polubienia
131
Ocena
4,88
P
PrintablesWCTT

2020 extrusion M4 T-Nut adapter

Simple M4 T-nut adapter for 2020 Aluminum Extrusions as I didn't find anything that fit what I needed on Thingiverse. I recommend printing with 100% infill and 5 side walls for strength since it's so small. Category: 3D Printer Parts

Pobrania
1350
Polubienia
144
Ocena
5
P
PrintablesDžino

2020 Corner Bracket dzino

2020 Corner Bracket dzino Alu profil 20x20mm T-5,5mm

Pobrania
1338
Polubienia
179
Ocena
4
P
PrintablesBasementLAB

Universal 2020 T-Slot V-Slot Nut - M3 / M4 / M5 Double Thread Alu_Profile - Inserto universale per profili 2020

Universal 2020 T-Slot V-Slot Nut - M3 / M4 / M5 Double Thread Alu_Profile - Inserto universale per profili 2020 M3 Single M4 Single M5 Single M4 25mm Double M4 40mm Double M5 25mm Double M5 40mm Double Resize to adjust dimension…

Pobrania
1334
Polubienia
631
Ocena
4,71
P
Printablesidig3D

Extrusion Corner Plate Brackets for 1515, 2020, 2525, 3030, or 4040

Extrusion corner brackets with built-in plates. Short and tall versions for 2020, 3030, and 4040 extruded aluminum -- and now with 2525. Print three of each for each corner. I like to break things down to essential patterns and make…

Pobrania
1300
Polubienia
284
Ocena
5
P
PrintablesDamian

Lego Speed Champions Stand 2020+

Lego Speed Champions Stand for post 2020 models. This is a remix of a great model created by RobC. You need to take pillars and other parts from the original model and my remixed platform.…

Pobrania
1277
Polubienia
216
Ocena
4,89
P
PrintablesBasementLAB

2020 "ITEM" T-Slot Profile Spare part - Parametric

2020 "ITEM" T-Slot "Profile 5" Spare part / Parametric Adjust the Z scale to obtain longer profiles Orient the model vertically for printing, and scale it to your desired height in the slicer. Adding a brim or raft may be necessary to…

Pobrania
1263
Polubienia
389
Ocena
5
P
PrintablesBasementLAB

Linear Connector for 2020 Tslot Aluminium Profile M4 Thread

Linear Connector for 2020 Tslot Aluminium Profile M4 Thread Two models available: Standard - Heavy Duty Suitable for: Update 15/04/24 - Added Reinforced Type 15/07/2025 - Added REV1 versions - Geometry cleanup All our designs are free to…

Pobrania
1261
Polubienia
200
Ocena
5
P
Printablessilpstream

Drill and Tap Jig for 2020, 2040 and 4040 v-slot extrusions

A jig to drilling holes for blind joints in v-slot extrusions as well as for tapping the ends of the extrusions. I use it when drilling and tapping the holes for 3D printer builds. There are 2 jigs. drill_tap_jig - This is used to tap the…

Pobrania
1194
Polubienia
406
Ocena
5
P
PrintablesCrambambuli

Voron V2.4 300^3 C920 gantry 2020 mount

To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077

Pobrania
1186
Polubienia
177
Ocena
4,92
P
PrintablesAaron F

Strong Corner Brackets 2020

Super strong corners for use on 2020 or 2040 extrusions.

Pobrania
1168
Polubienia
164
Ocena
4,78

2020 Tesla Roadster

This is a high poly replica of the upcoming 2020 Tesla Roadster. It was modeled in Blender over 25 hours. Any feedback would be appreciated! UPDATE 2: The front and rear logo are now available attached to the body or separate. The front…

Pobrania
1162
Polubienia
196
Ocena
4,8
P
PrintablesSE

T-nut M3 for ALU 2020 V slot

Print diagonally for the best result (like in image). Remove an overhang after print for easier nut insertion.

Pobrania
1146
Polubienia
112
Ocena
4,92
P
PrintablesScootworks

Wago 221 inline for 2020 extrusion housing

This simple housing lets you mount your Wago 221-2411 nicely on a 2020 (or 3030) extrusion. No special printer settings are required, but I recommend ABS/ASA material, especially when you are working with a heated chamber. BoM: 1x housing…

Pobrania
1141
Polubienia
446
Ocena
5
P
PrintablesGeorge

Dual Filament Spool Holder With Guide For 2020 Profile

After you convert to Direct Drive you probably need a new spool holder. So I made a dual spools holder for Ender 3 family (Ender 3, Ender 3 Pro, Ender 3 V2) or any 2020, 2040 profile like Prusa Bear. I modeled the holder myself and I…

Pobrania
1135
Polubienia
199
Ocena
4,94
P
PrintablesHiRez99

Simplex 2020 Profile M4 T-Nut

I bought an aluminum profile in 2020 for may ANET AM8 upgrade. It turned out this model of Simplex manufacturer. I did not find a suitable T-nut, because the inner dimensions are slightly different, so I designed one that fits this…

Pobrania
1107
Polubienia
106
Ocena
5
P
PrintablesBasementLAB

Gusset bracket - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile

Gusset Bracket - 2020 / 3030 / 4040 / 5050 Profile Suitable for: 2020 -3030 -4040 -5050 V-Slot T-Slot Alu profile 20x20x20mm 30x30x30mm 40x40x40mm 50x50x50mm Resize to adjust dimensions All our designs are free to download and use—because…

Pobrania
1098
Polubienia
178
Ocena
5

Drilling jigs for 2020 and 2040 extrusions

These jigs should help drilling holes in aluminium profiles that line up with taped ends of other profiles. Designed for 6mm groove profiles. The 66, 70 and 86mm dimensions were especially made for the Muldex 3D printer design from John…

Pobrania
1089
Polubienia
88
Ocena
5
P
PrintablesM1324

Voron 0.1/2.4 Roller Spool Holder for 1515/2020 Profile

Update_2: I have added a 100mm bracket for 2020 aluminum extrusion for my new Voron2.4, which should be compatible with most printers that use 2020 extrusion. I printed the bracket with PET and it has been running for somewhere about 60…

Pobrania
1082
Polubienia
178
Ocena
4,82
P
PrintablesBasementLAB

2020 Connector 3Way Corner Bracket _Cover M4 Thread

2020 Connector 3Way Corner Bracket _Cover M4 Thread Suitable for: Update: 31/05/2025 Added Rv1 04/11/2025 Added: 2020 Connector 3Way Corner Bracket Cover Custom 1 09/09/2026 Added RV2 Cleaned up geometries for improved accuracy and…

Pobrania
1062
Polubienia
234
Ocena
0
P
PrintablesTomTom

Cable Clip 4040 2040 2020

yet another cable-clip set for laser/printer/cnc machines with 4040 2040 2020 aluminium profiles. with the different sizes, cables from 0.1x0.1mm to 8x8mm can be fixed securely and very stable - both in the direction of the profile and 90…

Pobrania
1054
Polubienia
273
Ocena
4,67
P
PrintablesRyGuy Design

iPhone SE (2020,2022) / iPhone 8

I was working on designing a new phone case, and needed an accurate model of the device to work around, so I made my own. This was made using a Caliper from Harbor Freight, and Fusion 360. If you want the F360 file, message me and I can…

Pobrania
1033
Polubienia
40
Ocena
4,67
P
PrintablesMicrosoftWord

2020 Extrusion End Cap

Quick and easy cap I designed since I couldn't find any caps that fit my extrusions without binding or requiring repeated use of a hammer to fit. I added measurements if you too want to make sure this design fits your profile. Category:…

Pobrania
1030
Polubienia
112
Ocena
5