P
PrintablesIvosus
IKEA Lamp key clip - model 22217
model was printed on Prusa MK3S+. material: PLA layer: 0,2 mm perimeters: 4 infill: 20 %
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
- Pobrania
- 37
- Polubienia
- 8
- Ocena
- 0
Wyniki wyszukiwania: 217
448 modeli
P
PrintablesDalkain
Gridfinity Battery Trays (AA, AAA, AAAA, 18650, CR123, CR2, 9V, 21700, C, D)
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
- Pobrania
- 23 009
- Polubienia
- 3559
- Ocena
- 4,98
P
PrintablesDavid Newham
Lego Mercedes F1 42171 Wall Mount
Designed to fit snugly in the center of mass in the model. One screw seems to be enough to hold against the wall I recommend printing it with at least 6 walls, 35% infill, tree supports.
- Pobrania
- 3423
- Polubienia
- 177
- Ocena
- 5
P
PrintablesSartor
Lightweight 21700 6S2P, 6S3P battery holder
Print without support. In Prusa slicer it is better to use Classic perimeter generator (instead of Arachne) and disable “Detect thin walls” setting. For fast printing increase number of perimeters to 4 (for 0.4 nozzle) and disable “fill…
- Pobrania
- 1889
- Polubienia
- 94
- Ocena
- 5
P
PrintablesSpicy3d
18650/21700/26650/26800 snap holders
You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…
- Pobrania
- 1838
- Polubienia
- 353
- Ocena
- 4,89
P
PrintablesKrakka10
Wall Mount for Lego F1 Mercedes 42171
Stand with nose up
- Pobrania
- 1564
- Polubienia
- 112
- Ocena
- 5
P
PrintablesYXC
High current 18650/21700 holders with integrated spring
I can't find any high current 18650 holders on the market... So, this is it. Just need some M3x6+6(20A) or M4x6+6(30A) brass standoffs. ~~copper standoffs~~ Update: V2 Many small improvements. Print Settings Resolution: 0.2mm Infill: 20%…
- Pobrania
- 1453
- Polubienia
- 245
- Ocena
- 5
P
PrintablesMcAbra
21700 Battery Case
Not much to it, I needed one quick, but could not find one that would fit my need so I made my own. I've printed it with 0.3 mm layer height and 0.45 mm extrusion width. Disclamer I have no idea how safe it is, don't trust it - it's…
- Pobrania
- 1362
- Polubienia
- 139
- Ocena
- 4,72
P
PrintablesSartor
Batteries holder for 18650 or 21700 lion packs (6S, 4S, 2S)
Better to print from temperature resistant filament (ABS, PETg) and without supports
- Pobrania
- 1303
- Polubienia
- 113
- Ocena
- 5
P
PrintablesJankieL
Battery basket 21700
Baskets for 1 to 10 batteries. I took the plates out of baskets 18650 from aliexpress as in the picture because I have a lot of them and I needed baskets for 21700 battery
- Pobrania
- 1031
- Polubienia
- 113
- Ocena
- 5
P
PrintablesMike Hancock
LEGO Technic 42171 Mercedes-AMG F1 W14 E Wall mount (No Supports Needed)
Welcome to my first published model! This is a wall mount for the Technic Mercedes F1 car. The majority of mounts for this car require supports and/or are printed in an orientation where the car will be pulling against the layer lines -…
- Pobrania
- 1021
- Polubienia
- 94
- Ocena
- 5
P
PrintablesRustomac
Battery Travel Case (AAA, AA, 14500, 18650, 21700)
Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…
- Pobrania
- 966
- Polubienia
- 300
- Ocena
- 5
P
Printablesxtf
LEGO Technic - McLaren P1 (42172) Wall Mount
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
- Pobrania
- 851
- Polubienia
- 49
- Ocena
- 5
P
Printablesjames gittins
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose down. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
- Pobrania
- 848
- Polubienia
- 45
- Ocena
- 0
P
PrintablesLuheadr
Parametric 21700 battery holder/case
It prints well without supports. If you need anything more customized than the models I uploaded, I included the f3d file. How to use: See picture 1 Measurements Tab height: 3mm Holder height: 10mm Cell spacing: 1.35mm (3 perimeters with…
- Pobrania
- 822
- Polubienia
- 68
- Ocena
- 5
P
Printableschuyskywalker
21700 3p Cell Holders
A 21700 cell holder I came up with for make a 3p battery setup. They nest together in a nice, compact hexagonal/staggered shape for efficient use of space. There are two variants, and two setups. The first is a single piece, you can…
- Pobrania
- 692
- Polubienia
- 46
- Ocena
- 1
P
PrintablesAirwaves Ted
21700 Battery Beer Crate
Simple 21700 cell holder in the style of a beer crate. Holds up to 12 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 Infill: 5% Notes: Can be printed without supports if your printer handles…
- Pobrania
- 643
- Polubienia
- 71
- Ocena
- 4,75
P
PrintablesMaxter3D
Compact 21700 Battery Akku Case Enclosure with aktive Cooling Makita 18V Compatible
Dear Friends, If you like the Design leave a like and show some Love. I Bought an Anglegrinder from Makita and realised that the Battery got realy Warm and didnt last at long. So i needed more Power !! For what ever Reason Makita dont…
- Pobrania
- 630
- Polubienia
- 63
- Ocena
- 0
P
PrintablesSTRIKING FPV
TPU Battery Caps - 21700 4S
These are caps designed to hold 21700-sized Li-Ion cells to create a 4S battery. It's made from TPU for tightness in fitting and for shock absorbing, leaving air gaps between each cell to facilitate airflow for cooling. Included files…
- Pobrania
- 600
- Polubienia
- 110
- Ocena
- 4
P
PrintablesUnboxingexperience7
NLR35 - single 21700 Nanolongrange digital FPV drone
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…
- Pobrania
- 595
- Polubienia
- 186
- Ocena
- 0
P
PrintablesTim
lego technic 1x15 liftarm 6321716
obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…
- Pobrania
- 593
- Polubienia
- 54
- Ocena
- 5
P
PrintablesBriareus
Stackable 18650/21700 Holder
Stackable 18650/21700 Holder. Inspired by another stackable beer crate battery holders. 20x 18650 / 12x 21700 can be stored. To stack the crates, Print 'HOLDERBOTTOM' and glue it under the crate. *The model may not be oriented correctly,…
- Pobrania
- 590
- Polubienia
- 32
- Ocena
- 0
P
Printables4Null
21700 holder - no support
I printed the original from @Robindk but it used a massive 15% support material. My improvements are: slightly wider male pegs for a snug fit (+0.2mm width total) 45° fillet on the male pegs to print w/o support no curved overhangs on…
- Pobrania
- 579
- Polubienia
- 46
- Ocena
- 5
P
PrintablesAndras Farkas
21700 Cell Holders for DIY Battery Packs – Lightweight, Durable, and Easy to Print
Summary: The 21700 cell holder is a 3D-printable component designed for securely holding 21700 lithium-ion cells. It combines a lightweight structure with high durability, making it perfect for DIY battery packs, electronics projects, and…
- Pobrania
- 553
- Polubienia
- 103
- Ocena
- 5
P
PrintablesDani it Yourself
TP 4056 1A 18650 21700 CHARGER for 10 cells
This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…
- Pobrania
- 543
- Polubienia
- 84
- Ocena
- 5
P
Printablesthall72
Lego Compatible (32174.dat) Technic Axle Connector 2 x 3 with Ball Joint Socket - Open Sides Angled Forks with Closed Axle Holes
This model is compatible with the lego system.
- Pobrania
- 535
- Polubienia
- 44
- Ocena
- 4
P
Printablesdave818
Altoids tin battery inserts AA/AAA/18650/21700/etc.
I love repurposing Altoids tins. This is a collection of inserts for carrying various types of batteries. I've also included a blank insert you can use to create your own in Tinkercad or another design program. If you like this please…
- Pobrania
- 523
- Polubienia
- 88
- Ocena
- 0
P
PrintablesExtrutim
18650 / 21700 Battery Stand
A simple stand for your 18650 or 21700 Batteries. It can hold 24 of them. If you like check out my other designs too!
- Pobrania
- 515
- Polubienia
- 53
- Ocena
- 4,75
P
PrintablesDIY500AMP.COM
6S2P/12S1P Lightweight 22.2V 21700 Battery Holder for R/C Air Projects
This 3D-printed battery holder is designed for 21700 cells and supports configurations of 6S2P or 12S1P, making it ideal for lightweight R/C air applications. The design ensures durability and stability while keeping weight to a minimum,…
- Pobrania
- 513
- Polubienia
- 28
- Ocena
- 5
P
PrintablesSipper
Lego wallmount Mclaren P1 42172
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
- Pobrania
- 498
- Polubienia
- 24
- Ocena
- 5
P
PrintablesZycan12
21700 battery holder
This 21700 battery holder is simple and mainly meant to fit some readily available metal contacts that are found in the common 18650 battery holders. There are 2 versions. If you have the space then go for the big one otherwise the…
- Pobrania
- 493
- Polubienia
- 36
- Ocena
- 4,5
P
PrintablesOlaroll
Twin 21700 Battery Case
Just a little case for two 21700 batteries. The cap is secure and snaps on satisfyingly. There are also grooves for air to escape/enter to avoid pressure/vacuum in case of a tight fit.
- Pobrania
- 487
- Polubienia
- 44
- Ocena
- 4,25
P
Printablesvladikmukin17
holder 21700
Model for 21700 battery with holes for nickel tape, hole size 8.88mmx0.165mm
- Pobrania
- 485
- Polubienia
- 55
- Ocena
- 4,5
P
PrintablesRobindk
21700 modular battery holder
I needed some 21700 spaces for a DIY-Lipo battery I'm building. Couldn't find one on Printables, but found one on Thingyverse from user keepydroj: https://www.thingiverse.com/keepydroj/designs Link to the model:…
- Pobrania
- 480
- Polubienia
- 22
- Ocena
- 4
P
PrintablesEric Leung
21700 SMT Battery Holder
This is a strengthening mod based on an excellent battery holder by jkenny23. All credit goes to the original designer. If you like the model, please also click the original model link below and click like and probably post a make.…
- Pobrania
- 470
- Polubienia
- 37
- Ocena
- 5
P
PrintablesKyle Geisler
21700 3S Cell Spacer
This is a simple little cell spacer for a custom 3S battery for my Heewing Ranger T1. The most juice I can squeeze into it. I designed it to maximize the width and reduce the height of the pack.
- Pobrania
- 466
- Polubienia
- 44
- Ocena
- 5
P
PrintablesHelder Barreiros
Lego Koenigsegg Jesko Absolut - 42173 - Wall Mount
Lego Koenigsegg Jesko Absolut - 42173 - Wall Mount
- Pobrania
- 456
- Polubienia
- 23
- Ocena
- 4
P
PrintablesDIY500AMP.COM
13S4P 21700 - 48V 20ah Battery Tray
13S4P 21700 - 48V 20ah Battery Tray - compatible with 2P Strips
- Pobrania
- 440
- Polubienia
- 26
- Ocena
- 0
P
Printablesslashrsm
5x 21700 power bank
I had 5 21700 Samsung 40T left from another project so I decided to build a powerbank. I used this circuit, which supports most charging protocols. In my configuration powerbank comes with 20.000 mAh and weighs 450 grams. A lot of…
- Pobrania
- 435
- Polubienia
- 48
- Ocena
- 0
P
PrintablesDeniolan
Realistic Wheel Disc with nut for Lego McLaren F1 42141 or Mercedes 42171
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
- Pobrania
- 425
- Polubienia
- 72
- Ocena
- 5
P
PrintablesN7 Cat
Pump Jet (32mm 2212/2216/2217/2440 Motor)
An offshoot of my project https://www.thingiverse.com/thing:4606971 RC Pump Jet boat, I modeled a stand alone water jet originally intending boat to be modular in design. After consideration I decided to just integrate the pump jet with…
- Pobrania
- 424
- Polubienia
- 54
- Ocena
- 0
P
PrintablesOxmstr
DIY powerbank with 2170 21700 cells 5A PCB
A simple power bank with bought PCB and 2170 cells. I used the BAK N21700CG and LG M50 cells and a BMS/PCM PCB from Aliexpress (search term: QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650). There were also…
- Pobrania
- 418
- Polubienia
- 62
- Ocena
- 5
P
PrintablesRobinson
18650 & 21700 battery dispenser double stack
Nouveau modèle amélioré et entièrement paramétrique: ZigZagStack Battery Dispenser Permet de stocker un grand nombre d'accus tout en étant bien stable. Imprimé en PLA (essayé en PETG mais moins bon qu'en PLA car trop souple, la tour se…
- Pobrania
- 416
- Polubienia
- 38
- Ocena
- 5
P
PrintablesKatie
Dummy Li-Ion batteries - 18650, 21700, 26650 & 26700 - Fast printing
This is a set of dummy batteries, on each of: 18650 with button on top (yellow) 21700 flat top (green) 26650 flat top (white) 26700 flat top (blue) I use these to make battery enclosures etc. They are safer than using real batteries,…
- Pobrania
- 409
- Polubienia
- 18
- Ocena
- 5
P
PrintablesPipboy57
18650 21700 box
Printed at 0.2 layer height, you should have a little bit of room in the case. Fusion360 and step files included. Added a 3mm taller case for protected 18650 / 21700 and a smoother fillet on the cap !
- Pobrania
- 392
- Polubienia
- 70
- Ocena
- 4,33
P
Printablesjames gittins
Brick Technic Mercedes-AMG F1 W14 E (42171) Wall mount
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose up. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
- Pobrania
- 387
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPrintable Puzzle Project
Four Fit - Tray-packing puzzle by Stewart Coffin (STC #217)
Four Fit Tray-packing puzzle by Stewart Coffin (STC #217) Fit all four pieces into the rectangular opening. Four Fit is an absolute classic, and is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first,…
- Pobrania
- 385
- Polubienia
- 53
- Ocena
- 4,94
P
PrintablesBilly
LEGO Technic Mercedes-AMG F1 42171 Horizontal Mount
LEGO Technic Mercedes-AMG F1 42171 Horizontal Mount Printed using PETG and 0.2 mm layer Print vertical using minimal supports as shown in pic. Should take 40min max to print depending on your settings of course.
- Pobrania
- 381
- Polubienia
- 23
- Ocena
- 5
P
Printablestearandfix
Case for 100w powerbank module with 4s2p 21700 batteries
Another powerbank case for a popular module from Aliexpress. It is designed to be printed without supports with 0.2mm layer height. Requires 2 M3x10 countersunk screws and 2 M3x12 hex head screws. The screws goes directly into plastic.…
- Pobrania
- 377
- Polubienia
- 65
- Ocena
- 4,5
P
PrintablesTony,H
21700 battery Case
2023-08-21 Added a V2 where i made the inside tube a little wider to fit more batteries PLA 0.2 layer hight. Try printing the cap at 103% for it to fit better.
- Pobrania
- 372
- Polubienia
- 41
- Ocena
- 4,25
P
PrintablesTechAddict
18650/21700 Magnetic Battery Case
Print 2 of either model and glue 4 6mm x 3mm magnets using epoxy or superglue. Make sure magnets are in correct polarity before gluing or they will repel each other.
- Pobrania
- 362
- Polubienia
- 66
- Ocena
- 5
P
PrintablesLenny B FPV
21700 liion Battery Cage 6s 1p 2p universal + FalconRad Falcon 7 mod
Simple cage for 21700 liions in 6s1p and 6s2p configuration. I designed a simple universal Version without "feet" and a Version with “feet” so the packs fit and rest secure on the topdeck of the Falcon 7 frame. Also there is a connector…
- Pobrania
- 348
- Polubienia
- 53
- Ocena
- 0
P
PrintablesManu
Case 21700 x3
Bonjour Remix de https://www.thingiverse.com/thing:2165589 Merci beaucoup Tapion Zeus pour 3 x 21700 et aimant de 6 mm diamètre sur 3mm épaisseur Fichier Fusin360 inclus Hello Remix from https://www.thingiverse.com/thing:2165589 Many…
- Pobrania
- 326
- Polubienia
- 39
- Ocena
- 5
P
PrintablesSimply Thomas
Fixing 21700 batteries for spot welding
Hello. My proposal for creating battery packs for the size 21700 Print quality 0.2 Material: PLA , PLA + , PETG , Infill according to your reasonin
- Pobrania
- 322
- Polubienia
- 27
- Ocena
- 1
P
Printablesthall72
Lego Compatible (21778.dat) Minifig Hair Coiled
This model is compatible with the lego system.
- Pobrania
- 316
- Polubienia
- 29
- Ocena
- 0
P
Printablesjames gittins
Mercedes & McLaren F1 Lego Skadis Wall Mount (42171)(42141)
Skadis wall mount to fit the Mercedes F1 (42171) and the McLaren F1 (42141) Lego Models. Wall mount is printed in multiple parts to reduce the amount of supports needed, I would recommend tree supports for the main backing plate.
- Pobrania
- 313
- Polubienia
- 38
- Ocena
- 0
P
PrintablesColLynch
Lego 92176 Saturn V Wall Mount (Vertical)
Wall mount pieces for Lego set 92176 Saturn V Rocket. 2-piece set to vertically mount Lego Saturn V rocket. Print WallBase piece with the wall facing side on the bed (No supports required) Print TopClamp piece flat with long arms parallel…
- Pobrania
- 312
- Polubienia
- 35
- Ocena
- 5
P
Printableseyefly
superlight 21700 Li-Ion 4s1p / 4s2p spacer for FPV long-range
I do enjoy solderiong my long-range batteries myself. These spacer are very helpful when putting them together and provide protection against shortages in case of a crash. All version that i found on here were too heavy for my taste - as…
- Pobrania
- 310
- Polubienia
- 24
- Ocena
- 5
P
Printableszero3nna
Battery Cell Spacer 21700 10S3P & 13S4P
I used the following batteries: Molicel INR21700-P42A, 4200mAh 30A bis max. 45A Li-Ionen-Akku, 3,6V - 3,7V
- Pobrania
- 305
- Polubienia
- 26
- Ocena
- 0
P
PrintablesDIY500AMP.COM
3S2P or 6S1P Lightweight 11.1V 21700 Battery Holder for Compact DIY Projects
This 3D-printed battery holder is designed to securely hold six 21700 lithium-ion cells in a 3S2P configuration . Delivering 11.1V nominal output, it’s perfect for compact and lightweight battery builds, whether you're working on RC…
- Pobrania
- 293
- Polubienia
- 17
- Ocena
- 0
P
Printablesapkhou
65W / 100W DIY Powerbank Case 21700 4S3P pack
Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…
- Pobrania
- 293
- Polubienia
- 43
- Ocena
- 0
P
PrintablesDJ
Festool MFT DIY Corner Stops (20mm) 121x121mm, 217x121mm und 130x130mm (einstellbar)
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
- Pobrania
- 291
- Polubienia
- 79
- Ocena
- 5
P
PrintablesPointNemo
18650 21700 Akku Container
Akku Size (Diameter x Height): 18 x 65 mm (18650) 18 x 70 mm (18650, IC protected) 21 x 70 mm (21700) 21 x 75 mm (21700, IC protected) Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear…
- Pobrania
- 285
- Polubienia
- 39
- Ocena
- 5
P
PrintablesAlessandro Mandis
Mercedes-AMG F1 W14 #42171 Wall Hook
It mounts under the seat
- Pobrania
- 283
- Polubienia
- 13
- Ocena
- 5
P
PrintablesEvertonCa
Lego Wall Support for McLaren P1 42172
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
- Pobrania
- 282
- Polubienia
- 33
- Ocena
- 5
P
PrintablesMartin
21700 battery protection case
A thin case for 21700 batteries to prevent shortcuts during transport. Print instructions print in vase mode 0,6 mm extrusion width
- Pobrania
- 282
- Polubienia
- 31
- Ocena
- 5
P
Printablesthall72
Lego Compatible (32173.dat) Technic Bionicle Leg 2 x 6 with 2 Ball Joints
This model is compatible with the lego system.
- Pobrania
- 277
- Polubienia
- 30
- Ocena
- 0
P
PrintablesSymmster
Rugged Box for Batteries / Fully Printed /21700 & 18650
This is a box for a total of 4 batteries of type 21700 or 18650. Both boxes are similar except for the diameter of the battery holder and the height of the box. Everything was printed in PLA and the guide for the hinges is also a strand…
- Pobrania
- 271
- Polubienia
- 37
- Ocena
- 0
P
PrintablesMicah Black
4-wire Cell Holder for Battery Testing 18650 21700
Over the past several years, I've used many different cell holders for testing batteries. I've tried many options from the cheap leaf spring cell holders to expensive aluminum-framed universal cell holders, but none of them got everything…
- Pobrania
- 269
- Polubienia
- 55
- Ocena
- 0
P
Printablesthall72
Lego Compatible (21700.dat) Minifig Tool Sonic Screwdriver
This model is compatible with the lego system.
- Pobrania
- 267
- Polubienia
- 46
- Ocena
- 0
P
PrintablesTannis Root
Fan bracket for LSI 9207-8i / 9217-8i (for cheap fans, fdm friendly)
4 new variants : #1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan #2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in…
- Pobrania
- 264
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMaxim Shchetynin
21700 Li-Ion 3S battery pack
21700 Li-Ion 3S battery pack. The red parts on the picture are printed of hard material (ABS, PETG, GreenTEC, etc), black parts are soft (NinjaFlex, TPU, etc).
- Pobrania
- 255
- Polubienia
- 32
- Ocena
- 5
P
PrintablesEsqueue
Hex Battery 21700 Holder
Just took the 18650 hex model and scaled it up to work on my 21700 cells. I'll also include the scad file so you can take the files and make any custom size pack. I included a single up to 4 side by side. I just split the 84 cells into 2…
- Pobrania
- 254
- Polubienia
- 21
- Ocena
- 5
P
PrintablesJPMakesStuff
18650 to 21700 adapter
Needed a way to convert a 18650 cell to fit in the BT-20 Wingman power bank which is sized for a 21700 cell. Requires two 10 x 2.5 mm magnets (commonly sold as 10 x 3 mm) press fit into the end. Suggest PETG for strength, no supports.
- Pobrania
- 250
- Polubienia
- 33
- Ocena
- 0
P
Printablesthall72
Lego Compatible (21777.dat) Minifig Hair Female Ponytail with Tied Sections
This model is compatible with the lego system.
- Pobrania
- 248
- Polubienia
- 43
- Ocena
- 5
P
PrintablesSpicy3d
21700 Screw Lid Battery Holder
You can buy these from me here! Consider supporting us on Patreon! These 21700 battery holders with a screw lid are incredibly tough and rigid! Designed for use with unprotected button top and flat top cells. Print the bodies out of PETG…
- Pobrania
- 246
- Polubienia
- 36
- Ocena
- 5
P
PrintablesNathan Milton
21700 Spot Welding Jig
I jig designed to hold up to eight of your 21700 cells together while you spot weld them.
- Pobrania
- 237
- Polubienia
- 10
- Ocena
- 0
P
PrintablesDanial ADH
Dummy Lion Battery 18650 21700 Model 3D STL Object
This is a dummy model of a battery designed for tolerance and fitting tests. I would greatly appreciate any donations via buymecoffee. https://buymeacoffee.com/danialadh Category: Replacement Parts
- Pobrania
- 236
- Polubienia
- 11
- Ocena
- 4,67
P
PrintablesSulya
Minimalistic case for diy 21700 2S fpv goggle battery
21700 version of my minimalistic fpv battery case design ( https://www.thingiverse.com/thing:2828955 ) Currently designed for wider, 35mm head straps, but I think it would work with regular 25mm straps just fine. To get the cap onto wires…
- Pobrania
- 236
- Polubienia
- 25
- Ocena
- 5
P
PrintablesSanti Aguilera Alvarez
21700 10s3p battery holder
This is a battery cell holder for 21700 (21mm in diameter and 70mm in length). If you print two, you can configure a 10s3p, 3s10p, etc...
- Pobrania
- 235
- Polubienia
- 19
- Ocena
- 0
P
PrintablesFačko - Esk8 with Engineering
21700 gluing tray
Hi All Maybe it will help You. Tray is in 10 degree angle to be more comfortable for gluing. And also becouse of engle ,batteries are self aligned by their weight. Nominal gap between batteries is 0,5mm to be sure that will works for all…
- Pobrania
- 226
- Polubienia
- 25
- Ocena
- 5
P
Printablesthall72
Lego Compatible (4217.dat) Brick 1 x 14 with Groove
This model is compatible with the lego system.
- Pobrania
- 220
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMike
21700 Support 2x10
A support for 2x10 arrangement of 21700
- Pobrania
- 216
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJerome
18650 to 21700 Li-Ion Adapter
Côté “+”, utilisez des aimants néodymes de 6 mm de diamètre et d'une hauteur comprise entre 3 et 5mm. On the positive side, use 6-mm-diameter neodymium magnets with a height of 3 to 5mm.
- Pobrania
- 215
- Polubienia
- 33
- Ocena
- 5
P
PrintablesOxmstr
2170 spot welding guides 3s staggered
Spot welding guides for 2170 cells (21mm diameter, 70mm height) that are meant only for support during welding, after the pack is welded remove the guides. Category: DIY
- Pobrania
- 208
- Polubienia
- 36
- Ocena
- 0
P
PrintablesYaroslav_Ryabtsev
21700 4s PD QC 100W Power Bank Enclosure
Adaptation of a power bank PCB from Aliexpress with all major quick charging protocols and cell balancing. Holes are almost necessary. Heat output is around 10w in the worst case scenario. Cells overheat at maximum charging power even…
- Pobrania
- 204
- Polubienia
- 29
- Ocena
- 0
P
PrintablesMarcel 1994
BMW Ventildeckel Kappe Valve Cover e38 e39 e46 e36 e34 e60 e61 11121726089
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
- Pobrania
- 201
- Polubienia
- 19
- Ocena
- 0
P
PrintablesMadeBySaints
18650 + 21700 Battery Rack
This is the first model I'm sharing to the prusa website! Infill 20% zigzag. 0.2mm layer height. no supports. Brims for Rods for better adhesion. Filament used in photos - Overture PLA Professional Green. Printed on Ender 3 V2 Fastened…
- Pobrania
- 199
- Polubienia
- 36
- Ocena
- 5
P
PrintablesZALE DFM LAB
21700 Li-Iron Battery Base for Spot Welding (4S Pack)
21700 Li-iron Battery pack Base for Spot welding 4S pack.
- Pobrania
- 197
- Polubienia
- 9
- Ocena
- 0
P
Printablesmasselkopp
21700 Dual-Box
I need a transport box for my new 21700 batteries. The cover is held in place by two small lugs. The box has The box has vent holes for safety. Für meine neuen 21700 Akkus brauche ich eine Transportbox. Der Decke arretiert durch zwei…
- Pobrania
- 197
- Polubienia
- 24
- Ocena
- 0
P
PrintablesMike
21700 Spacer for Onewheel Battery Pack
This spacer is used to set the horizontal spacing of 21700 cells so that the height of the pack fits within a onewheel XR battery enclosure.
- Pobrania
- 192
- Polubienia
- 20
- Ocena
- 0
P
Printablesdoragasu
21700x5 Battery Welding Guide
Guides for welding up to 5 x 21700 LiPo batteries together. FreeCAD file is included for easy remixing.
- Pobrania
- 189
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMaxim Shchetynin
21700 Li-Ion 4S battery pack
21700 Li-Ion 4S battery pack. The red parts on the picture are printed of hard material (ABS, PETG, GreenTEC, etc), black parts are soft (NinjaFlex, TPU, etc).
- Pobrania
- 187
- Polubienia
- 30
- Ocena
- 0
P
Printablescekpi7
18650 to 21700 adapter
I have few devices that use 21700 batteries, but i only have one. I have ton of 18650 batteries with higher capacity so i thought about using them instead. There are two models, adapter and sleeve. If your device has longer spring (since…
- Pobrania
- 183
- Polubienia
- 16
- Ocena
- 0
P
Printablesthall72
Lego Compatible (11217.dat) Minifig Helmet SW Clone Trooper Phase 2
This model is compatible with the lego system.
- Pobrania
- 181
- Polubienia
- 34
- Ocena
- 5
P
PrintablesAleksR2D2
Powerbank 20000 mAh (21700)
Part list: powerbank modul IP5310 (LX-LBC 3.1) 3.1A 4 Samsung INR21700-50E (4x5000 mAh) 4 screws M2x12 silicone cable AWG18 silicone glue Advice: Fix the module board with glue Fix the battery with glue to the body of the powerbank…
- Pobrania
- 180
- Polubienia
- 36
- Ocena
- 0
P
PrintablesDIY500AMP.COM
21700 - 13S3P Round Model 48V Battery
This 3D model is a 13S3P round battery holder specifically designed for 21700 lithium-ion cells. Its circular design allows for a compact, space-saving configuration, ideal for building 48V battery packs for electric bikes, scooters, or…
- Pobrania
- 178
- Polubienia
- 16
- Ocena
- 5
P
PrintablesEvertonCa
Lego Wall Support for McLaren F1 42141 and Mercedes F1 42171
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
- Pobrania
- 172
- Polubienia
- 32
- Ocena
- 5
P
PrintablesLucio Ferrante
21700 3S 3P Battery Pack Spacer
nothing special, just print it as fast as you can. Infill 15% triangles PETG or another technical filament
- Pobrania
- 171
- Polubienia
- 18
- Ocena
- 4