P
Printablesthall72
Lego Compatible (4480c01.dat) Bike 2 Wheel Motorcycle Frame 3 x 6 x 3 (Complete)
This model is compatible with the lego system.
- Pobrania
- 848
- Polubienia
- 136
- Ocena
- 5
Wyniki wyszukiwania: 448
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (44861.dat) Plate 1 x 2 with Single Clip on Top (Thick C-Clip)
This model is compatible with the lego system.
- Pobrania
- 475
- Polubienia
- 31
- Ocena
- 0
P
Printablesthall72
Lego Compatible (4488.dat) Plate 2 x 2 with 1 Wheel Pin
This model is compatible with the lego system.
- Pobrania
- 345
- Polubienia
- 23
- Ocena
- 5
P
Printablesthall72
Lego Compatible (4485.dat) Minifig Cap with Long Flat Peak
This model is compatible with the lego system.
- Pobrania
- 278
- Polubienia
- 29
- Ocena
- 4,67
P
Printablesthall72
Lego Compatible (44807.dat) Bionicle Head Rahkshi
This model is compatible with the lego system.
- Pobrania
- 231
- Polubienia
- 35
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44865.dat) Brick 1 x 2 with Pin with Bottom Stud Holder
This model is compatible with the lego system.
- Pobrania
- 229
- Polubienia
- 20
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44813.dat) Bionicle Weapon Staff of Light Blade
This model is compatible with the lego system.
- Pobrania
- 219
- Polubienia
- 38
- Ocena
- 0
P
PrintablesTheNewHobbyist
Cast of Angel with Candlestick (1448)
I captured this at The Victoria & Albert Museum using ReCap360 and my iPhone 6S. The scan was cleaned up in MeshMixer before uploading. I've also included the raw scan data if you'd like to process it yourself. Cast Of Luca della Robbia…
- Pobrania
- 201
- Polubienia
- 32
- Ocena
- 0
P
Printablesthall72
Lego Compatible (4489b.dat) Wheel 2.8 x 34 with 8 Spokes with Notched Hole for Wheel Holding Pin
This model is compatible with the lego system.
- Pobrania
- 186
- Polubienia
- 21
- Ocena
- 0
P
PrintablesShmal
Wall Mount Shelf for Shaw Fiber+ Gateway 2.0 Modem XB7 / Arris TG4482
Partially enclosed shelf for a Shaw Fibre+ Gateway modem 2.0 (XB7). Also works for Comcast XFinity TG4482 / Arris. Printed with PETG, 20% infill, no supports needed. Suggest adding a cylinder modifier around the screw holes to strengthen…
- Pobrania
- 170
- Polubienia
- 15
- Ocena
- 0
P
PrintablesTrevor
Briggs Conserver Toilet (Push Button#4484) Replacement Parts: Push Rods for Dual Flush Button Lever
The part is bracketed below with the measurement of 41/4”. Replaces white rod only. It is slightly longer than the original, this allows it to be threaded farther up into the button assembly.
- Pobrania
- 168
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSuwanee Rail Shops
Roco 4481 Close Coupling / Kurzkupplung
Roco cars are wonderful but they come with a regular swinging coupler yolk. You can purchase close coupling item 4481 (kurzkupplung artikel 4481) to make the cars close coupling… but good luck ever finding one to buy. Clean the print of…
- Pobrania
- 159
- Polubienia
- 5
- Ocena
- 0
P
Printablesthall72
Lego Compatible (27448.dat) Turntable Flat Base 2 x 2
This model is compatible with the lego system.
- Pobrania
- 124
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDieterMBE
Marklin H0 7047 448-4 Lantern Light Bulb
I draw and printed this for a friend who was missing some parts for a Maklin lantern. I used transparant filament for the ‘Light Bulb’ I enabled support for the 'Top' part I recomment using a filament with high temperature resistance…
- Pobrania
- 120
- Polubienia
- 11
- Ocena
- 0
P
PrintablesCamS
Shaw BlueCurve / Arris TG4482 Modem wall bracket
This bracket allows you to wall mount a Shaw BlueCurve cable internet modem. (Technically the ARRIS Wireless Gateway TG4482) Generically: Technicolor | CommScope CGM4331SHW | TG4482. AKA: Fibre+ Gateway 2.0 (XB7) Mount to the wall with #6…
- Pobrania
- 115
- Polubienia
- 10
- Ocena
- 5
P
Printablesthall72
Lego Compatible (4483.dat) Motorcycle Windshield
This model is compatible with the lego system.
- Pobrania
- 103
- Polubienia
- 17
- Ocena
- 0
P
Printablesherbert
Dyson Contact Head Bodendüse - 904486-19
This can be used to bridge the gap if the flex hose inside the contact head broke. In my case it was cheaper to create and print this part instead of buying a new contact head for my Dyson.
- Pobrania
- 88
- Polubienia
- 3
- Ocena
- 5
P
Printablesjcjames_13009
![Hook Drive Gear #174488 for Singer 7184 [REMIX]](https://media.printables.com/media/prints/1169334/images/8859486_2ca0c9fc-a7b3-441f-84af-47f86fd53451_3c37ec74-e2ad-4bfa-9974-d322dd2930d8/gear-174488-3d-4-800x600.jpg)
Hook Drive Gear #174488 for Singer 7184 [REMIX]
One of the gears in my old Singer 7184 sewing machine broke and didn't wanted to purchase expensive replacement part. I found that model https://www.thingiverse.com/thing:4699608 and 3D printed it after few modifications to ease its…
- Pobrania
- 71
- Polubienia
- 8
- Ocena
- 0
P
Printablesthall72
Lego Compatible (44848.dat) Sports Hockey Puck without Axlehole
This model is compatible with the lego system.
- Pobrania
- 47
- Polubienia
- 11
- Ocena
- 0
P
PrintablesRayd
Wi-Fi Modem Stand (TG4482)
It is a very simple design made in TinkerCAD. It has a very very snug fit, so if you're worried about scratching your modem you can increase the width and length of the base by the amount you desire and use it instead. Have not tried…
- Pobrania
- 45
- Polubienia
- 0
- Ocena
- 0
P
Printables4488 Shockwave 3D printing
4488 Shockwave FRC 3D Printed Swerve Wheel Composition 2025
50% Gyroid infill works best for traction in our studies, the tire is made out of TPU and the hubs are made on Markforged Onyx printers. Used for West Coast SwerveX modules.
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
Printablesthall72
Lego Compatible (3448.dat) Minifig Headgear Ninjago Wrap / Hood Smooth with Molded Armor Plate with Horns Pattern
This model is compatible with the lego system.
- Pobrania
- 36
- Polubienia
- 17
- Ocena
- 0
P
PrintablesOlitech
Makita LXT 18V Battery Mount V4 for 644808-8
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 1
P
Printablesnoobmaster69
PLAYMOBIL Steck 3666 Castle Arched Window Shutter 3064486 (30644860) - Replacement Part
This is a 3D-printable replacement for PLAYMOBIL part 3064486 / 30644860 , the small arched window shutter used on the classic PLAYMOBIL 3666 castle . The shutter is designed to fit the matching arched window frame used on the castle and…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJohnMartin
Woodhaven 4448 Track End Cap
End cap fits the extrusion at the link below. Woodhaven 4448 Ultra Track - Router Tables - Amazon.com
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGiovanni1954
ORGANIZZATORE GT448
ORGANIZZATORE GT448 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
- Pobrania
- 14
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTyler Wenzel
Gridfinity Craftsman 44808 3/8 Ratchet Bin
Gridfinity refined bin requiring no supports. Uses 6x2mm magnets use recommended settings for Gridfinity bins
- Pobrania
- 14
- Polubienia
- 13
- Ocena
- 0
P
PrintablesSpareParts
Frigidaire Dishwasher Upper Rack Sprayarm Tube 5304482490
Replacement part for Frigidaire Dishwasher, Model No. FDB2410HIS2A. The original manufacturer's part number is 5304482490. On the parts diagram it is item 135. The original part supplied by the manufacturer is made a an inferior plastic…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCaptnW
Gridfinity Cutout for Maped 448 Stapler - Tacker Halter
Have your Maped 448 stapler right at hand with this gridfinity-based stapler holder. Features: provides additional storage space for 18 staple stacks up to 36 stacks if you double them (fits quite tight) cutout remark of the type of…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablestechnomancy
CMG 5448 Electric motor fan cowl
1-1 copy of the CMG 5448 electric motor fan cowl, after designing this part i noticed the model part under the silicone and tape, and found its a $20 replacement, but if someone else gets some use from the file then it wasn't 5 hours…
- Pobrania
- 12
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNguyên Nam Nhât
Philips Sandwich maker/ Toastie maker/ Croque monsieur (HD4484)
This closure is made to replace the closure of the Philips croque monsieur machine. I printed this with 50% infill and a brim, side ways.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTyler Wenzel
Gridfinity Bin for Craftsman 44807 1/4 Ratchet
Uses the gridfinity refined style of base requiring no support structure. Uses 6x2mm magnets use recommended settings for gridfinity bins.
- Pobrania
- 11
- Polubienia
- 13
- Ocena
- 0
P
PrintablesTyler Wenzel
Gridfinity Craftsman 44809 1/2 Ratchet Bin
Gridfinity refined base requiring no supports. Uses 6x2mm magnets use recommended settings for gridfinity bins
- Pobrania
- 11
- Polubienia
- 6
- Ocena
- 0
P
Printablesjohnolinda
Viewsonic 2448M Foot
This replaces the stock foot for the Viewsonic 2448M monitor. I recommend printing in PETG to avoid warping over time. Mine has been in use for about 9 months without any warping or cracking.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printables4488 Shockwave 3D printing
4488 Shockwave Velcro Wiring Clips
Velcro not included, 15% Infill 2 Walls Thick work best in our studies.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIncalculable
Filter-Key for Bosch Ultra Clarity 644845
A wrench for fridge water filters Bosch Ultra Clarity 644845, REPLFLTR10, 740560, AP3962558; Haier 0060820860, RF-2800-13, RF-2800-15, Rangemaster DXD 90170; Bypass Cartridge. Print instructions Print using at least 15% infill in PLA,…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printables
Motorola APX 6000 Radio Holster (standard 4485A battery)
Show your pride and upgrade your gear with the Motorola APX 6000 Radio Holster — Thin Blue Line Edition from Song Dawg Designs. This lightweight, durable 3D-printed holster is designed to keep your APX 6000 radio secure and ready for…
P
Printables
Motorola APX 6000 Radio Holster —4547A & 4486A extended batteries (Duty Belt + 1.5” Belt + MOLLE)
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
P
Printables
Makita LXT 18V Battery Mount V4 for 644808-8
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
P
Printablessongdawgdesigns
Motorola APX 6000 Radio Holster (standard 4485A battery)
Show your pride and upgrade your gear with the Motorola APX 6000 Radio Holster — Thin Blue Line Edition from Song Dawg Designs. This lightweight, durable 3D-printed holster is designed to keep your APX 6000 radio secure and ready for…
- Polubienia
- 7
- Ocena
- 0
P
Printablessongdawgdesigns
Motorola APX 6000 Radio Holster —4547A & 4486A extended batteries (Duty Belt + 1.5” Belt + MOLLE)
Show your pride and upgrade your duty gear with the Motorola APX 6000 Radio Holster — Thin Blue/Red Line Edition . This is a lightweight, durable 3D-printed holster built to keep your radio secure and accessible—on patrol, at the range,…
- Polubienia
- 3
- Ocena
- 5