188 modeli
belt can holder for 330ml and 500ml cans. 3 types of belt connections(open, semi-open, closed) and different files for ASA/Nylon or PETG print with 0,40mm nozzle 3 walls/25% infill or 0,6mm nozzle 2 walls/25% infill slide in the top part…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Em aprendizagem eu criei uma e nesse momento estou imprimindo, sei que ela funciona pois imprimi ela parcialmente, espero conseguir por mais fotos dela. Estou imprimindo em PETG tampo de vidro, aquecido a 80º inicialmente e 70º outras…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
If you want a smaller on look at the original: https://www.printables.com/de/model/549833-euro-can-dispenser
Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siloconu.
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
FOR THE HORDE! Can Holder 500ml
The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…
Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
These extended front parts allow the can dispenser to work with 500ml Ø66mm cans. First upload was too wide. Removed 1cm. The parts should still (barely) fit on a prusa mini, and the 3mf file has all the modified front parts with infill…
Holder for standard 500ml (67mm diameter) European cans. Printing about 7h on A1, 300g PLA at 15% fill, support only under handle. https://www.youtube.com/shorts/VcPHv7hgoV0
There are 150mm and 200mm height options. Optional drip tray.
A dryer stand for 500ml soft flask bottles from a Salomon running vest. Remix of Rainer Stropek's design.
This model is used to hold a 500 ml can on bicycle bottle cages.
Can dispenser designed for 500ml cans (diameter 66mm, length 169mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge) Print…
Designed that long time ago and tbh too lazy to go a photograph the printed product but for me it works with the fat stem beach umbrellas. Standard 0.4 nozzle mine is of ASA After several times being used still holds.
print on the side 3 perimeter, 15 infill 19g petg Made to fit 500ml can Added 3rd hole
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Just 999henry's can holder stretched a little in the Z axis so it will hold 500ml cans better.
Nested and keyed Beverage Can Dispenser for standard 500ml cans. There are versions that hold six (6) or five (5) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed…
a smal Plant watering funnel for potted plants with a capacity of roughly 500ml.
No more scrunching up that resin filter so it fits in the bottle and playing the waiting game as it filters resin that could have little support pieces in it. These funnels will screw onto any 3DJake 500ml or 1000ml resin bottle, fits…
This wall mount bottle holder suits bottles that are 65mm in diameter and takes a 60-65mm LED plate at the bottom of the holder to make the content of the bottle shine :D Two versions closed and open upper support ring. This is a made on…
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Made a quick remix in meshmixer using the stl. This will fit 500ml can as the given 500ml can clip didn't fit the cans from where im from (i believe it is for 1pint cans). Has a brim at the small part for better adhesion.
It's just a beer can clip for your bicycle
This is a tray for use with the 500ml Salomon Soft Flask Bottle Dryer Rack you can download here: https://www.printables.com/model/938523-500ml-salomon-soft-flask-bottle-dryer-rack The model includes a tray and an insert which provides a…
Various sizes. Easy to print. Preferably in PETG. Have fun with it.
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
Vaso chop de 500ml liso para poder poner tus logos y perzonalisarlos Sin soportes 0.2 altura de capa
This beer / can dispenser for 500ml cans was made for festivals and outdoor events . Therefore it should not be to unstable and could be carried without falling apart. Therefore it is printed in several parts to ensure stability by the…
Convert your 16oz Yeti can cooler to fit 500ml cans.
Dosenkühler für 500ml Getränkedosen, Hält an heißen Sommertagen die Getränke kühl.
Print the Lid without supports, no extra build plate adhesion is required, a skirt or none will do. This model is to be printed with harder filaments, not FLEX due to the exact measurements for the PLA bend factor. FLEX will not grip the…
Scaled up to fit the north american 500mL monster energy cans. I have various sizes available for purchase on mym cults3D if you want other can sizes. V cheap, just a little extra scrap to help me invest in housing.…
Endlich keine Fliegen oder Ähnliches mehr in Ihrer Dose. Mit dem stylischen Aufsatzdeckel ist Ihr Getränk sicher Finally, no more flies or the like in your can. Your drink is safe with the stylish top lid
I created this two-part beer holder especially for festivals and therefore it had to be very sturdy because it is not handled well there and has to last a few days. Suitable for European cans with a size of 330 and 500 ml For non-standard…
I designed this to make it easy and convenient to always have some water close by. I looked at other downloadable clips, and most either required a strap, carabiner/D-loop, or something similar to clip onto a belt loop. I often find that…
Use this connector-piece to make the can dispenser compatible with 500ml cans. The rest of the pieces you can download here: https://www.printables.com/model/1209009-12oz-or-16oz-can-dispenser-20
This is a 3D printed reusable cap designed to fit standard 500ml aluminum soda or beer cans. After opening a can, this cap lets you reseal it to keep the drink fresh in the fridge and prevent spills. ✅ Fits most 500ml aluminum cans…
Insert for 500ml Nalgene bottles to assist with ideal drink flow
Quick remix of the Segan Designs can adapter to fit 500ml / 16.9oz cans. Fits the gen2 12oz Colsters with quarter turn threads.
It's a simple design but it works - it fits very good. Print with TPU, slow speed, infill 15%. If you want, you can also print the lid downscaled to 99% (all axes) to make it more tight - it's 0,6mm less in diameter = 0,3mm radius / each…
I needed a quick way to turn a standard 500ml water bottle, into a sport bottle, where I could quickly change out the cap, as the water bottles were used. We had a sporting event where we needed to share the water, and needed a way to…
Der Deckel rastet auf einer 330ml/500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus einm…
Der Deckel rastet auf einer 330ml oder 500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus…
Remix of "V2 Beverage Can Dispenser" for Monster cans (500ml)
After many months of trying out different can handles and adapting them to fit 500mL cans i noticed they all have a common flaw. You can only grab them from one side. After the struggles of wanting to grab my beer with my left hand from…
I noticed that I was getting bugs flying into my drinks when I walked away. So, I decided to design this cover. I am aware that there are others out there, but I wanted to see if I could do it and get it to fit. I’m not the most confident…
Adapter for 474ml (US 16 oz / US Pint) Yeti Colster to enable it to hold a 500ml (US 16.8 oz) can. Can also be used as a drink identifier.
Nested and keyed Beverage Can Dispenser for standard 500ml cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it to stay together…
This we designed to prevent clogging and allow maximum airflow so there no more waiting for your resin to drain. The ribs in the funnel will prevent the resin soaked screen from laminating to the funnel wall and the funnel angle make sure…
Can holder, mug for 500ml Aluminium cans. Print without support Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.28 Infill: 20% Filament: Gembird PLA red/blue Category: Kitchen &…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Beschreibung Passend für 15 Bier Dosen 500ml / 0,5L => Schichthöhe 0,28 => Support auf Druckplatte => Infill: 20% => PETG oder PLA Teile Liste: KG Rohr DN 200 Länge: 1m 1x 1m Gewindestange M10 10x Mutter M10 5x Unterlegscheiben Außen…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
I grew tired of expensive water bottles that would get stopped up or drip everywhere. After looking at a dog bowl that used a 2L bottle, I thought I could do the same for our hamster. This two piece water bottle will mount on a wire frame…
This is a printable 500ml bottle or flask. Please check out the video to know what you are getting. It works but there are some caveats. Video at... https://youtu.be/s2qBuGyuLSg More details are available at... https://logicalplanet.com/…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
Introducing KeyCanGuard – a practical and portable cover for standard 500 ml cans (ideal for energy drinks like Monster, Semtex, and more). This model solves multiple problems at once: Drink Protection: Protects your open drink from…
Printed & tested in Petg with 3 walls and 13% gyroid infill, 0,24 Layer height. Handle only need support at lowest point. Fits well, 2mm air around can. Text from original creator: Designed for cans with a 66mm Diameter. This is a "Stein"…
Beer mug. Cheers! Category: Kitchen & Dining
print without support Category: Kitchen & Dining
I needed a holder to help transport my Kimble 500ml media bottles. I assume it will also fit other media bottle brands so long as they are around 86mm. Holders will tightly interlock together to provide stability. Included the .step file…
for a cold Drink on a Long tour | für ein kühle Erfrischung auf einer langen Tour
Verschluß für eine 330ml oder 500ml Dose mit Lebensbaum
print without infill and supports
Circular Bottle Holder designed to fit Tershine brand bottles and other car care products with slim 500ml bottles. created by request I have no use of it myself so no test print have been made. Please give me feedback and suggestions on…
Works with 500ml cans in slovakia, don't know about other countries.
Came out nicely for me when printed with a 0.8mm nozzle w/ 0.4mm layer height.
Voici un support mural pour égoutter vos flask Salomon !
UPDATED JUNE 20: Added Revision 2... *This revision has not been printed or tested yet. Use at your own risk. Slight redesign to improve strength of the syringe holder, (At the cost of more material, obviously), as well as a concept for a…
Verschluß für eine 330ml oder 500ml Dose mit Happy Camper Camper Wohnwagen
As with all print-in-place models, your printer needs to be calibrated quite well. In addition, it needs to be able to reliably bridge a 17.23mm gap. FreeCAD source file and .step file included.
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.
Simple print No supports infill 15%
This is a simple can crusher for 16oz/500ml soda cans. I printed in PLA. There are two sets of models to choose from, The non-combined version prints the Piston and Piston Cap separate along with the cylinder and cylinder bottom. OR you…
A set of two snap-on lids for aluminum beverage cans that prevent drinks from being contaminated by insects.
Verschluß für eine 330ml oder 500ml Dose mit Jack Daniels
Dies ist eine verbesserte Version 2: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder 500ml Dose am Rand ein.…
Dies ist eine verbesserte Version 2.3: Deckel lässt ich um 180° öffnen an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt leichtes Anbringen und Abnehmen - easy on / off weniger Material…
I wanted a coaster for my Monster energy drink so here it is for everyone to use, you are welcome. Print settings do not require anything specific. I printed with 3 perimeters 10% concentric infill and concentric top layers for better…
This is a simple but effective 3D Print to close up your 500ml Beer-Cans. Protect your beverage from bees and other insects. This model is specifically created for 500ml Beer-Cans with a diameter of 67mm. I've also uploaded a few…
Verschluß für eine 330ml oder 500ml Dose mit Rammstein
Verschluß für eine 330ml oder 500ml Dose mit FC Bayern München Logo
Once strapped to the Kat walk its not as easy to grab for some stuff around, as you place it somewhere where you wont hit stuff while in action, so how about hydration?! While in game you can get lost in time easily and sweat a lot so its…
Verschluß für eine 330ml oder 500ml Dose mit Motocross Spruch
A can magazine for your refrigerator, keep your cans cold and organised :)
Adaptor is 36mm Diameter including thread, 6mm pitch. Fits a turner shaft diameter of 20mm. Fitted for Anko brand from Kmart. Should fit other brands using their OEM's design, but not tested.
Verschluß für eine 330ml oder 500ml Dose mit Stitch
Der Deckel rastet auf einer 330ml/500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus einm…
Oil filter beer can holder – a two-piece, screw-threaded design that can be easily unscrewed for convenient access and c
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
