1721 modeli
Gyomeland M53R, a custom Magic: the Gathering Commander sized deck box. Inspired by the industrial kitchen ranges sold by Garland, this new and improved design features: Improved Oven Door, securing your 100 card Commander deck within.…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a addon for the Lego Skeleton: https://www.prusaprinters.org/prints/78695-mega-lego-like-skeleton-101-scale Hope you will love it as much as i do :D
Wydruk około 4,84 €–5,91 € nettoWstępna wycena jednego wariantu
Elevate your router for better signal and stability. Single screw fitting. Should be comparable with most screw sizes, use washer to ensure a secure fit. Designed for Asus RT-AX53U router however should fit any router with 84mm - 85mm…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena jednego wariantu
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 4,49 €–5,49 € nettoWstępna wycena jednego wariantu
Quintet in F Tray-packing puzzle by Stewart Coffin (STC #253) Fit all five pieces into the parallelogram-shaped opening. Quintet in F is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Winner, 1952 Grand Prix of Switzerland, driven by Piero Taruffi Piero Taruffi, a native of Rome, studied industrial engineering and showed potential racing motorcycles, but wouldn't achieve success in competition until after World War II.…
Wydruk około 6,79 €–8,30 € nettoWstępna wycena jednego wariantu
Hi, this is a powerbank-holder for the HTC Deluxe Audio Strap (DAS) & Anker 533 PowerCore PD30W Powerbank. Designed to sit on the top portion of the DAS in order to be able to lean back in a chair without a powerbank sticking out. Perfect…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Printed in PETG, modified and tested so it can be printed without any supports, with the wall/furniture facing side on the bed. It may be too wide for some printers (225mm) but can be shortened to 220.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A tool to help you loosen the backplate of the all too heavily glued VFC Boltcarriers. Will fit HK53/PSG1 as well. This tool is meant to help you, get the backplate loose. Do not over tighten using this tool!!!!
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shower knob extension for shower faucet Duschknopf Erweiterung für Duscharmatur für Ideal Standard Brause-Thermostat THERM 50 A4532AA 3D-Drucker: MK4 Material: PETG Slicer: PrusaSlicer 2.7.3 Schichten und Perimeter: Schichthöhe: 0,2mm…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
STAIR LED BOX BASE002_0.4n_0.2mm_PETG_MK4IS_9h53m
Wydruk około 12,06 €–14,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple Door Knob for our fridge ( IGNIS ARL536-LH ). Came without one so I made one with Fusion. I also uploaded the CAD-Files from Fusion360 for easy modifications if needed.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Collection of Gridfinity basic cups height 7 (53mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
part bolts into existing belt clip mount (uses m2.5 bolt) no recommended to print in pla , it will shatter or deform . best printed with cf filled nylon or PC . no supports needed
This handy tool attaches to the outside of motorcycle chain oil cans, and enables you easily oil the chain with one hand. It splits the oil path from the outlet tube into two and places the oil over the rings where it is supposed to go.…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Where to mount phone holder in Smart EQ Fortwo 453 car? I found several phone holders but no one is best for my car so I decide to develop something by myself. And it can be used also as pen holder. You can see video here I made lot of…
This model is compatible with the lego system.
An angled wall mount to allow you to mount the Lego UCS Gunship (75309). This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so…
Printed at default 0.20mm 15% infill.
I designed this because the existing models on the internet were either paid or not well made. It fits snugly and does not slide off. The current version turned out to be slightly smaller than expected, but it still fits my (average size)…
I will add some custom design of it later ;) enjoy!
Optimized for 0.4mm nozzle. For structural rigidity I recommend to print the lower side from PLA the upper side from TPU. #M600
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
I got the dark millennium falcon (75389) and wanted to mount it flat on the wall like my other version. They changed the landing gear on this set which did not allow me to use the existing mount design. This allows it to be mounded at…
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was looking for something to help nurture my 10-year old budding artist…
This project made it to official Prusa YouTube Channel They had no spare LEGO plates to insert into holes, so on video project is not completly finished, but overall you can see at least how the printed parts are made 🧡 Before you go…
Der Wandhalter dient zum aufhängen einer FRITZ!Box 7530 AX. Am Rahmen sind kleine Laschen, mit denen man die Kabel mithilfe eines Kabelbinders aufhängen kann.
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
This model is compatible with the lego system.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
A magazine I designed after my factory CZ one. Might require some hand fitting. The spring and follower are steel.
Hello Here is my biggest project. It is a complete 3D model of Jawa-ČZ 250/353.02 motorcycle, made in 1955 year in Czechoslovakia for export. The creating of the model took more than 6 years because i have not any blueprints and all part…
Maz-537 has functioning suspension, doors and a removable flatbed. No supports slicer supports, except for wheel mounts and beams. All the other parts that need supports have them built in. All the parts fit smaller build plates like…
Top lid can be secured by M3 × 6 mm screws. The module itself holds onto the prongs and is pushed down by the lid, can also use soldering iron to spread the plastic around and secure the board. For soldered wires only, no connectors.
Remix of the original design for the newest generation tools, modified the screw hole size to for the 6-32 screw used on the new models. Also added optional retaining magnets 5mmx3mm behind the bit locations to keep the bits from working…
This model is compatible with the lego system.
Holder/s for WD40, 3DLac and other sprays. Inner diameter optimized for 65 or 53 mm sprays. 3mf and bgcode for 1 or 3 pieces. Any number of pieces can be made. It is also possible to achieve a different diameter by adjusting the scale.…
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
This model is compatible with the lego system.
This model is compatible with the lego system.
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
This is a wall mount for the LEGO UCS X-Wing Starfighter (75355). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle to keep it secure. There are…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Fuel Impact…
Designed from one of my typical 50 foot box cars, fully printed everything except for the bogies/axles/wheels and the Kadee couplers. I designed the coupler box on to the undercarriage and also modeled a coupler box cover that is friction…
Un chargeur portable puissant et pratique, parfait pour les urgences ou les déplacements. Nous avons utilisé une batterie 18650, choisie pour sa capacité élevée (jusqu'à 3000 mAh) et sa disponibilité. Ce chargeur peut alimenter…
I have seen a similar version on etsy. The rear holes for the belt clip is designed for M2 brass inserts. I added a blank version as .STP to make remixing easier. Printed in Prusament PC Blend to make it as sturdy as possible.
Support to put the AVM FRITZ!box 7530 and 7530 AX in a vertical position. You need to print 2 pieces. I also uploaded the .STEP file of someone wants to make some modifications. PS: from the comments, it also works for the 7230 and 5530…
Simple case for Samsung A53 5G. Materiał: flexible, like TPU. Print with supports.
Remix or Yanev's model. I've removed the MicroUSB hole, fixed the screw holes and most importantly, I've removed the big slot to see the charge percent and replaced it with small 1.5mm holes to add a transparent acrylic rod for the LEDs.…
With the update of Bambu Studio to version 1.7.0.53 (Public Beta), there are some changes to the syntax of the gcodes command. I have updated the start code to work with the new calibration lines. The end code remains the same. This is…
This model is compatible with the lego system.
This model is compatible with the lego system.
A box to contain a pn532 rfid module. No arduino on this one because I'm connecting it directly to my pc (via an usb<->serial adapter). Communication is done trough the libnfc library under Linux Debian (…
This is a dual hose conversion rear panel for the "Electrolux Chill Flex Pro EXP35U538CW" airconditioner. I implemented the same Electrolux connector made by wejn . It works great with his 150mm hose attachment .…
This model is compatible with the lego system.
This model is compatible with the lego system.
Hello, here you are the 2nd part of my motorcycle. Hope the frame you printed without any issues :) https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame In this case it is engine crankcase, the engine…
Small case for the elechouse PN532 NFC RFID Module v3 . Based off of but not remixed from aix150's design . Mine is for a lock, which is why I created the original with a lock design on the lid. The base also has an inset portion for the…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Find BOM and PCB…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
This model is compatible with the lego system.
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
Wall mount pieces for Lego set 75382 UCS TIE Interceptor (2024) 2-piece set to mount Lego set to the wall. Wall mount is angled in a way to show the Interceptor in slightly tilted down position, mainly as its mounted above head in its…
Printing work with supports use a lot of cooling!
This model is compatible with the lego system.
Secures the Razor Crest to the wall without requiring the set to be modified in any way. Because the top panels and canopy are not secured very well on this set, I would highly suggest hanging the set on the wall without these panels…
A highly detailed collectible statue featuring a voluptuous female sci-fi soldier. The confident trooper stands in a striking pose, armed with an assault rifle and wearing tactical gear, including a combat helmet, spiked armor pads, and a…
I was not satisfied for my A53. So I fix size and also I edit model to be printable only with PLA and fit for samsung A53.
Here you are the 5th part of my Jawa-ČZ 250/353.02 build. Hope the 4th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.4 od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com The 5h part consist a big…
Finally I bring you the last part of my built. After this part you will have a complete 3D model of the SOLO bike. Of course, if you also want to own a sidecar or a winter fairing, you need to continue to persevere in the construction…
CZ 515 - 22LR 10 round magazine Fully DIY 10 round magazine. Tested and working flawlessly with my CZ 515 Tactical. Should also work with: CZ452, CZ453, CZ455, CZ457 & CZ512 Brno Models 1, 2 & 5 Cogswell & Harrison Certus Norinco JW15 &…
Here you are the 7th part of my Jawa-ČZ 250/353.02 build. Hope the 6th part was fun for you :) https://www.printables.com/cs/model/802455-project-jawa-cz-kyvacka-25035302-part-no6-rear-mud As usual the model part consist a big parts but…
This is my version of the QIDI Plus 4 print Rear Cover. During stock cooling, the temperature of the drivers exceeded 100 degrees. When installing a 120 mm fan, the temperature was kept at 65-70 degrees. Installing the 7530 fan in this…
Das ist eine Schutzhülle für das Samsung Galaxy A53 5G. Zum Drucken muss man ein Flexibles Filament wie zum Beispiel TPU nehmen. Die Hülle auf dem Bild wurde mit Fiberlogy MattFlex 40D Rot gedruckt.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* This opening is another source of hot air leakage -…
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
Hope the 7th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.7 - Wheels od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay…
Hope the 8th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.8 - Front mudguard + seat od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
This model is compatible with the lego system.
Here you are the 4th part of my Jawa-ČZ 250/353.02 build. Hope the 3rd part was fun for you :) https://www.printables.com/cs/model/766034-project-jawa-cz-kyvacka-25035302-part-no3-front-fo The 4th sequel is quite comprehensive, so pay…
This model is compatible with the lego system.
Here you are the 3rd part of my Jawa-ČZ 250/353.02 build. Hope the 2nd part was fun for you :) https://www.printables.com/cs/model/751984-project-jawa-cz-kyvacka-25035302-part-no2-engine-c Today it is complete neck and front fork covers.…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
Here you are the 6th part of my Jawa-ČZ 250/353.02 build. Hope the 5th part was fun for you :) Project JAWA-ČZ KÝVAČKA 250/353.02 - PART No.5 - Under seat covers + tank od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com…
Print it with pet-g for UV resistance,or pet1 from bottles. 0.2 layer hight. added model with custom support for up side down print,i struggled with overhangs when printed pet-g.
Minor adjustments to my previous design, the Deutsche Bundesbahn Gls205/Gms54 Guterwagen (https://www.printables.com/model/181948-deutsche-bundesbahn-gls205-gms54-guterwagen-gauge-) have resulted in this very similar Gmhs53. 11NOV2018:…
The case used for the TapTo USB-C Reader . Compatible with any of the black USB-C PN532 NFC modules available on sites like AliExpress. Please see the TapTo Wiki for more information about TapTo and the PN532 NFC module. This model is a…
Tow hook cover at the front as it is no longer available, a 3D part was made. not quite original but good enough. PETG printed.
![Display Stand for LEGO Star Wars Microfighters and Polybags [last update 27.05.2025] / 75400 75391 75344](https://media.printables.com/media/prints/427956/images/4197916_10ccaadf-5adf-459c-923a-defcc0d5886b/img_20230702_152357.jpg)
