1303 modeli
Hello there this is a simple case for the popular cheap DC-DC converter modules (LM2596(S)). Route the cables through the case bottom before you solder them to the DC-DC converter. Easily resized and customized in Fusion360 with the…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I like the original model, but I wanted to be able to mount it to the underside of my Ikea Lack table. So I added two tabs for wood screws. Edit 1.4.2023 - Model slightly adjusted for easier printing (side vents)
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Klíč na vytlačování obsahu hmot v tubových obalech do šíře 59mm.
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
I remixed the battery cover from another remote control to fit on the model BN59-01303A. It is a little bit too thick and it fits a bit tightly, but then you will not loose it easily ;) It prints best standing with brim.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Wydruk około 2,95 €–3,61 € nettoWstępna wycena jednego wariantu
Antoni Pleszowski "Over a grave" (1859–1889) This woman, her hair covered and a melancholic expression on her face, appears lost in thought, perhaps mourning a loved one. The pose, reminiscent of Michelangelo and later Baroque Roman…
Wydruk około 5,25 €–6,42 € nettoWstępna wycena jednego wariantu
Es handelt sich um einen Nachbau einer Kippschere mit der Kennung "48 A 59". Sie wurde abweichend vom Orginal um die letzte Einrastung eingekürzt. Die Kippschere verhindert allgemein, dass das Fenster beim Öffnen aus dem Rahmen fällt und…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
Replacement for pedal top of a sewing machine. (Necchi 559). After the pedal fell off a table, the top part was broken. I designed a replacement part so the safe operation of the pedal was possible again. Material: PETG or PC (The used…
Wydruk około 8,62 €–10,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bonsai display table (No. 08) round 75x75x59mm, best for mame bonsai. Feel free to scale up or down until you like the result and it suits your tree. A little support is necessary, even if the pot and feet are printed separately. However,…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of lo-La59 or Lola droid. Mandalorian Lola Droid (Homebrew) by stevem37 - Thingiverse
Wydruk około 18,86 €–23,05 € nettoWstępna wycena jednego wariantu
Printable spare part for the LEGO Excavator 64771. Just use the standard properties for your PLA / PETG filament. Support needed.
Wydruk około 1,06 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a can holder without the supports or edges, to fix it directly to the wall or furniture. I have remixed the model from Olo Deepdelver, removing the back edges, moving the screw hole and adding a small extrusion at the back just…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
I wanted to add RGB lighting to my housing where the printer is located. I had RGB and wanted to use them, but RGB works on 5V, so I installed the StepDown module and added a JST plug to make it more practical. I take power directly from…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Meine erste Kreation bzw. Model also seit bitte nachsichtig. Sollte eine Aufbewahrungsbox für die Steckschlüssel sein, da beim Original nur eine Papierschachtel dabei war. Kann gerne geteilt und verbessert werden.
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
I modified the box top to handle a TSL2591 sensor from Adafruit. The holes are made for M2 screws and nuts. I used M2x6 but it looks like shorter ones could be used too. The hole is sort of a hack because its made wide enough to not…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMW 503 1956-1959 Coupe
Wydruk około 4,98 €–6,08 € nettoWstępna wycena jednego wariantu
A holder for the Tradfri light switch that can be placed on the Jung light switch. The bracket can be used with normal, series and double light switches. Inside the cover is a 10x5mm neodym magnet. Switch:…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Feet for the Hammond 1591XXF that allows for easy stacking of the enclosures
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Pieza impresa en PLA, por alumnos del CIPFP Canastell, San Vicente del Raspeig, Alicante. impresora: Eryone thinker SE
Wydruk około 3,54 €–4,33 € nettoWstępna wycena jednego wariantu
>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Peterbilt 359-inspired truck is made in such a way that allows it to be printed all in one piece. Once it's done, you can pop it off your buildplate and play with it. The wheels spin, the hood opens and the sleeper cab door on one…
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
Happy to present my TR-590 Mk X tricorder kit! Update 1/28/24 - Added versions of the Body with built-in support feet that you can break off with pliers afterwards. They firmly hold the corners and edges down to prevent curling up. You…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
Hi! Here comes my Hammond type boxes, sizes 125B, 1590A, 1590B, and 1590BB. Perfect for DIY effect pedals. The files are available in STL and STEP formats. Personally I use wood screws diameter 3 to close the boxes. I print in PLA, with…
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA In the quaint town of Bellissimo, there was a charming Fiat 500 named Bella. With her vibrant red paint and retro design, she turned…
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
This model is compatible with the lego system.
Version of Halo Reach Commando helmet using helmet from Halo Reach - Noble 1 - Carter - A259 - Mark 5 armor set including Helmet as a base. Added details referencing Halo Reach from MCC on PC version. Neck separated from the rest of the…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
simple leg to place the FRITZ!Box 7590 in an upright position. Print instructions You need to print two pieces. Update Added a version with legs approx. 14 mm longer for better clearance with thicker cables.
Simple and light enclosure for the LM2596 Buck converter There is a lid with text, and with no text. .step file included --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No…
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
I wasn't happy with any commercially-available options for this and the 3D-printable solutions I found online were iffy, so I made this design! This model is intended to be secured using 4 or 8 M5 heatset inserts, and 12mm-long bolts…
I have re-mixed this part to include a hole for the feed wire to the LM2596 in the back of the case, also increased the length of the LM2596 mounting holes as the smallest M3 screws i have where too long, also notched the two nounting…
A tool-less, snap-fit enclosure for your LM2596 buck/step-down converter that should snap-onto any 2020 extrusion without extra hardware. This enclosure also allows you to keep your wires separate via the outside channels or together in…
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
I really liked @blackboots2_227840 LM2596 case design , but it didn't quite fit the version of the LM2596 converters I had in hand, namely, the board and case screws weren't aligned (there was about a 1mm difference) and the top case…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
This model is compatible with the lego system.
Designed for: LM2596 buck converter (see image)
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
This model is compatible with the lego system.
I used countersunk screws to give cleaner look. Hope you enjoy!
Wandhalterung mit Kabelzuführung von Unten und guter Belüftung der Fritzbox. Gedruckt mit 65% Infill in ABS. Stützen aktviert um die “Nasen” der Halterung sauber zu drucken.
I remixed a Fritz!Box stand for the 7590. Made it higher so the connectors fit underneath. Also added a second version where the Fritz!Box is leaning a little bit backwards. Remixed from this:…
This model is compatible with the lego system.
I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…
Remington 597 magazine. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: Doesn't Matter Supports: Yes Resolution: .100 Infill: Your choice, I used 45% honeycomb Filament: Proto Pasta HTPLA CF Black CF Category: Sport &…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
This model is compatible with the lego system.
Rackmount für die FritzBox 7590 im 19 Zoll Serverschrank. Dabei können die Anschlüsse der FritzBox über bis zu sechs Keystone Adapter nach vorn herausgeführt werden. Folgendes wird zur Montage der beiden Teile benötigt: 8x…
LM2596 Holder for DIN-Rails Category: Electronics Based on Models by Greg Cormier (https://www.thingiverse.com/enkoopa/designs), 3DPrintSOS(https://www.thingiverse.com/fedorsosnin/designs) and Jens Petersen…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
This project provides the models for a printable vacuum clamping system utilizing the Dewalt Grabo DCE592B lifters. All fittings are ¼" push connect lines and ¼" NPT thread. BOM Dewalt Grabo DCE592B lifter Minwax Polycrylic sealant 1/16"…
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 25mm Type: DriveDog 3,7mm
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
Based on the ingenious design by jwags55 . This remix is designed to fit the typical LM2596 buck converter. It should be a tight fit on 35mm DIN Rails and hold the converter securely. Use two M3x10mm Bolts and nuts to secure it to the…
I seperated the eyes and eye rings so you can print them in different colors.
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
This is a super simple holder for a LM2596 step-down buck converter module, it helps with mounting the module within a larger enclosure without shorting anything out. I bought this particular module from Banggood at the link here:…
Another LM2596 Case. None of the other LM2596 Cases I found quite fitted the Buck that I have, so I created my own. I made the button pin longer than necessary to allow for "stick out" choice. Hope it's useful. I used 4 x M3x15 screws.…
This is an stand for Fritzbox! 7590 (don't fit to 7590ax) it provides the folloging features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a snap fit enclosure for a LM2596 Buck Converter with a voltage display and PCB mounted screw terminals. No fasteners required! It does not have additional mounting features but could easily be mounted to a flat surface using…
Case and spot welder holder. The cover has button extensions included.
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
This model is compatible with the lego system.
This model is compatible with the lego system.
I changed the dimensions for this module. https://www.amazon.de/dp/B081N6WWJS?psc=1&ref=ppx_yo2ov_dt_b_product_details
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
This model is compatible with the lego system.
Couldn't find a bracket model for my LM2596S buck converter that fits to a DIN rail or DIN rail clip, so I designed my own in fusion. Uses a DIN rail clip, I used the heat insert version from @Maxstupo…
Speaker adapter for Alfa Romeo 159 (potentially compatible with other models). Dimensions: Diameter of the bottom side circle - 170mm Distance between the outer holes for screws - 125mm Distance between speaker screw holes - 110mm Outer…
hello, this is the basic model of the case for this mobile phone, which copies its curves and protects not only the camera lens from scratches. Enjoy, made with love
LM2596 DC-DC Case. Ideal for mounting on 40x20 aluminum profile. Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through…
This model is compatible with the lego system.
With this mount and the 97222-din-rail-bracket , you should be able to clip it onto a DIN rail. The F360 file is also here if you want to modify it; it's pretty messy. Warning : Don't just print this out and expect it to work; I found…
This model is compatible with the lego system.
Small buck converter mount meant for the Voron switchwire/enderwire
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
I didn't quite like the other taller remix versions of this great under desk drawer by Paul, so I remixed my own. Solid and hex bottom versions are provided. Versions with custom corner brims are available if you think you will have…
Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…
This model is compatible with the lego system.
This is an ambidextrous wall mount for a Mossberg 500/590. It is ambidextrous, it can be mounted from either direction based on assembly. It includes the following mounts: Standard W/ Defender Tactical shell adapter 2x Ø4mm x 40mm screws…
This model is compatible with the lego system.
