Liczymy pasujące modele…
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Wydruk około 0,82 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a strong 3d printed electric motor mount for Chinese 885 and 775 12/24v dc motors. PLA 0.4 print nozzle Nozzle temp 210C Bed temp 60C Standard 0.2 layer height 9 hours to print all 4 pieces at standard settings
Wydruk około 7,25 €–8,86 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Laptop Stand (designed for Dell Precision 7550 but fits others too). Simple print. Uses 30mm m5 nuts and bolts. Sits the laptop up nice and high as a second screen, with room for a dock underneath.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Laptops are expensive, and if you're using a Dell Precision 7550 with the dual-USB-C docking connector, you're heading in a direction that's going to require you to replace your motherboard. Of course, motherboard replacements are…
Simple Notebook Stand that should suit all Notebooks with up to a thickness of 29mm, This specific design has room for the device wide feet on the 2020 Dell Precision 7550 notebooks. Print instructions Category: Computer Summary Simple…
This is a desk stand for the Motorola XPR7550 and XPR7550E radios. Print Settings Printer: Monoprice Select Mini V2 Rafts: Yes **Supports:** Doesn't Matter Infill: 20% Category: Electronics
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Rotate models to point upwards. Case back should be on the bed, Front of case should face up. Use supports for the front of the case I used organic supports on the case back to support the overhangs on the outside of the case, as well as…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a desk stand for the Motorola SL7550 DMR Radio. It has been tested with both the regular and extended battery packs.
The hood prop holder snapped on my Jeep Patriot, and I didn't feel like paying 18 CAD for a cheap injection moulded plastic part just because it was “genuine”, so of to Onshape I went. It took a few iterations to make it snap without much…
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
ENGLISH description: Wanted to put my relatively big desktop computer off from my desk. So I made this wall mount. It is the width of dell optiplex 755. (93mm). But also usable for different computers of this size. Printing instructions:…
These old Porter Cable nose cushions eventually just crumble. They do sell replacement parts online, but they are pretty pricey for a simple part. There was one other model on here that was a replacement for the very similar nailers…
Trigger block for 'always on' use. This model has the heaviest trigger pull of any Karcher product and has no 'lock on' function often resulting in hand and arm fatigue from prolonged use. Insert between the top trigger and the housing…
A bit of the clip broke, and rather than paying £10 for a replacement OE part, I decided to challenge myself to build one. It's a bit bendy with PETG, but does the job, and I don't have any ABS to test if that would be better. 100% infil,…
Simple monitor shelf modelled to fit the angle and front lip on the BenQ RL2755-B (or ZOWIE RL2755) gaming monitor. Split into 4 sections for easy printing and modular setup, there is Left and Right end pieces (with a rear lip as well as…
Model of the plastic part of the Lego Electric Plate 1 x 2 with Contacts. You can obtain the metal parts from broken Lego 9v electronics. You can cut larger metal plates to size. This is best printed studs down. You will need to melt the…
Here is a toy keyholder replica of the Trigger Blizzard/Lavaskates 755 inline skate Modeled from reference pictures. It should be quite faithful to the real skate. The model is provided as a lot of several parts: liner top, shell,…
A replacement stitch length dial for the brother db2-b755 (mine is the -5 but should also work on the -3 and some other) I printed it without support and it came out fine in PLA
This is a replacement for the NEC 1755d belt clip. Dies ist ein Ersatzgürtelclip für das NEC 1755d DECT-Telefon. Category: Replacement Parts
Simple Mount for the Clarion EQS755 7-Band. Pick a place for the mount, screw the mount in place then screw in the EQ to the mount.
This is a replacement for the speaker grill of the Dell Inspiron 15 7559. Because the lacquer on the original part peeled off and it started to rust, i decided to design a new one. This can be printed on the standard Ender 3 bed…
Technic Gear 8 Tooth with Clutch on One Side (7557)
This is a cable entry gland plate for an RS PRO 7755300 painted steel enclosure. The design may work for other enclosures with similarly sized gland plates. Heat set inserts in the plate attach the plate to the enclosure. I printed the…
Technic Wishbone 7 x 7 x 4 (7558). September 21 2026: Updated undercut to accomodate technic beam inside
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
This is the non-USB model
This is a replacement for MMC7553AA. The originals are foam and are 99% likely completely disintegrated by this point. Although the foam no doubt provides better NVH characteristics, TPU should do the job fine and it's better than having…
Basic stand with numbered pockets for PB Swiss Tools Splintentreibersatz PB 755.BL 2-8mm
This model is compatible with the lego system.
This model is compatible with the lego system.
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
This model is compatible with the lego system.
Knife Block for Cuisinart Knife Set #17550F. Holds 8in Chef, 8in Slicing, 8in Bread, 6in Santoku, 6in Serrated, and 3.5in Paring knives.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Print in TPU Modelled from measuring the actual part with calipers. Fits perfectly on the plastic trim pieces to locate and prevent interior creaks/rattles. Useful in places where the black cones are too long and make locating trims…
