Play Cards Box for 63 mm x 88mm Cards
A box which has a hexagon pattern on both sides, the box fits 63 mm x 88mm cards.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
- Pobrania
- 93
- Polubienia
- 6
- Ocena
- 0
Liczymy pasujące modele…
A box which has a hexagon pattern on both sides, the box fits 63 mm x 88mm cards.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
This is a lid of the small round Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the clips…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
The two files include the base, top, and the two middle sections. In the second file, where the base has an extra ring around the bottom, is the bottom of the shell. The second part, which starts to narrow, is the top, and the file is the…
Wydruk około 22,41 €–27,39 € nettoWstępna wycena jednego wariantu
Collection of Gridfinity basic cups height 12 (88mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This is a award medal blank I designed. It is 88mm in diameter and 6mm thick. The recess is 4mm deep, I've found this is plenty to allow for detail on the face of the award. The loop at the top is sized for 1.5 inch ribbon.
88mm Kwk 36 HE Shell This Shell was used in the Tiger I Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. It has been designed to fit the projectile by AskaLooN…
Dual cell phone cup holder fits most autos, has hols to run USB cable to button of phone, design fit thicker cases as well, i have a IPhone 11 with battery case fit perfect on large and a 6s with battery case fit is small slop, also…
Explosive pen holder.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
Honeycomb storage wall section that i cut off a few hexagons and now it is 88mm X 82mm so that it can fit on smaller print bed sizes. Please post a make if you made it!
I'm (very slowly) trying to put a Voron 2.4 together with all the spare parts I have, and trying to print what I can. I was surprised how well it worked to just print the timing belt, so I'll be putting what I've got up to Printables for…
Keeps you cards in good shape while stored. No supports required. Print the lid with the ‘Dealer’ text facing down and the card case with the opening facing up.
Motivation When building a temporary model railway bridge or ramp, you need pillars with various sizes. Using Lego for this purpose did not look too realistic. For this reason I designed a pluggable model railway pillar system, that…
1:1 Tiger1 88mm Shell Container
This is a box to replace the original box for my 17mm, 19mm and 21mm wheel lug nut sockets. It will fit sockets with an outer diameter of max 32mm by 88mm length. I printed the bottom part and the lock-tab in PETG, the top was printed in…
A somewhat historical Tiger 2 shell casing. The inspiration for the model was @Mark https://www.printables.com/model/372659-88mm-kwk-36-he-shell because I wanted a 88mm kwk43 L/71 model of the casing so I could display both. I filled mine…
188mm GT2 closed belt (actually ~188.5mm, as it was set to 91 teeth), 6mm wide. Designed primarily for my Rook 2020 build. Printed out of 95A TPU
Goalkeeper paddle wedge deflecting attachment to prevent the puck from hitting your fingers. Disclaimer I know nothing about the sport or paddle wedges. This is a work in progress and tested by @Anders_3827016. Please check back for…
A remixed version of mikefromnashville's 14mm high model adjusted to fit sleeved 63.5x88mm cards used for Aeon's End. Here are the sleeves used: https://www.sleeveyourgames.com/sleeves/19/aeons-end
This 88 mm tall ornament is made in two flat pieces so it can be mailed. When put together, they form a 3-dimensional ornament for decorating the tree. A smaller, 54 mm tall, similar ornament is also available in another download.
PLEASE PUT THE SIZE UP IF IT IS SMALL
Original Rat Rig V-Core 3's spool holder (https://github.com/Rat-Rig/V-core-3/tree/main/cad/printed_parts/accessories/stl) is suitable just for spools up to about 66mm wide. This is just a very simple remix suitable for 88mm spools.…
Enjoy sharp, crisp views without spikes on stars! Not much to say. Use silicone adhesive, 26 gauge steel wire and haywire twists (or guitar string) with 8 guitar tuners spaced in a square normal to your focuser. The secondary I used is…
7-day insert for 88mm x 48mm pill bottle, as used by HyVee and other pharmacy chains. I use these for daily doses, but also made an AM/PM variant for those who take pills twice a day. This version has slots in the bottom nthat act as a…
I needed to extend the Z-range of my Andonstar AD407 Pro, so I designed a 88mm extender. I had some M8x110 screws laying around so I designed the extender for it. The extender will fit and tube that has the internal diameter of 12mm and…
This model can be used, if you only have longer than original length linear rods, or the lengths are not exact. Remix of the X-Axis with belt tensioner by Boogie Features Both Motor holder and idler holder come in two different variations…
Der Raft, auf dem struckturiertem Federstahlblech geprägt, ist die ideale Oberfläche zum Benetzen mit Geschirrspülmittel, zusätzlichem Speisen einer lang-lebigen dickwandigen Seifenblase während des Blasvorganges und sanfter Entnabelung…
Shelf for an Ikea Skadis pegboard to help organize modeling supplies. Will hols 4 Tamiya / Mr Hobby square bottles or other supplies. Printed in PLA with support for the peg mount hooks.
Reductor for spool inner hole. Will reduce any hole having 77mm-88mm to a fixed size of 55mm, perfect for AMS from Bambu Lab. I have bought a lot of PLA spools from various sources, each having different diameters for it's holes, most of…
remix of uno card box
Create optimal conditions for the rooting of your plant cuttings by removing the bottom of an 88 mm soft drink bottle and utilizing the upper portion as a dome. Please follow the instructions for your plant type when it comes to…
Pro K. Klotz ist die 3D Druck Variante vom Holz Bauspiel K.Klotz, siehe mein vorheriges Modell! Ursprünglich sollte es nur als Bohrschablone für die Holzbausteine dienen, es stellte sich aber heraus, dass dieses System ein enormes…
A Gridfinity Box with the dimensions of 2x3x3 for cards(for example dry erase cards). The box doesn't have slots magnets. Feel free to remix the model. I generated the other bins on the picture on the Gridfinity generator website.
Remix for cup holder that is 88mm wide to fit a Nalgene. Remixed this for my couch.
Holder for sealable bags
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
Exactly what it says in the title, nothing more. Is useful in my workshop
I needed a fairly deep switch box in order to finish up a project of installing speaker wires and a fiber optic line to an uninsulated garage. The support on the back of the fiber cable prevents it from being installed in a standard 50mm…
The Ring is 88mm in diameter and 2.60mm wire
This Memoir '44 token is designed to be 3D printed with multiple colours of filament. You can either use a multicolour 3D printer with different colours of filament, or pause the printer at the right time, to swap filament for each layer…
Turn your Alexa into a fun rocket for the children, choose the colours of your choice. Slots in nose cone allow you to still see lights, see picture Choose more interesting colours than I did, just printed for proof of concept and check…
Printed on Prusa with 0,1mm layer Material: PLA or PETG
Hopefully this is useful to someone else. This is designed to drill holes straight and centre into a 88mm width, 20mm depth of timber. There's also a stopper at 70mm and 147mm, as I needed to build a coat rack at 760mm. Can be printed…
Goalkeeper paddle wedge deflecting attachment to prevent the puck from hitting your fingers. Disclaimer I know nothing about the sport or paddle wedges. This is a work in progress and tested by @Anders_3827016. Please check back for…
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…