Liczymy pasujące modele…
Płyta bazowa LEGO w różnych rozmiarach jest gładka od spodu, dzięki czemu można ją przykleić do dowolnej powierzchni. Rozmiary płyty bazowej: 12x8 6x3 6x4 5x4 5x3 Oczywiście na płytce można zbudować dowolna rzecz. Wypusty zostały tak…
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
Netsuke, Fukurokuju with Karako. A Japanese ivory button used to hang objects from the sash of a kimono.
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
Hack up your allen keys , heat key up and insert into handle.
Wydruk około 16,31 €–19,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact bottle opener that you can have with you at anytime. You need only 2 washers with 8.8mm outside diameter and 0.8mm thickness (the inner diameter is usually 4.2 - 4.4mm, but it is not significant). Print instructions I recommend…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Der Stopfen verhindert, dass Tabak in das Phunnelloch fällt, und so die Möbel beschmutzt werden.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
DE-9 (commonly referred to as DB-9) Breakout box to banana jacks. Includes two DE-9 connector holes (intended for in and out), and 9 banana jacks. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes, for…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Breakout board holder to mount in electronic box, i use mine for PrintNC CNC machine. More info below grblHAL is an open source gcode interpreter that runs on microcontrollers. It is a 32bit fork of the original open source grbl project,…
Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a case for the OpenDTU breakout board (easy to order from a board manufacturer using, e.g., KiCad). It has clips at the bottom to hold the board (not moving around) and a hole for the external antenna. I have used this with…
Wydruk około 2,75 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've been using the Seeed Studio ATX PSU breakout board for a while now and nearly had an incident by leaving the board floating around the desk with lots of metal bits around. I decided to make a simple cover for the bottom to prevent…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Studenti určí těžiště tuhého tělesa pomocí měření a výpočtu. Výsledky zaznamenají do pracovního listu.
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Meet Drako, the softest dragon you’ll ever print! With his cute horns, squishy tail, and big bright eyes, he’s here to melt hearts—not villages. Fast to print and support-free, Drako is the perfect blend of myth and cuteness.
The original box for the iFixit Mako Driver Kit is held closed by magnets. However, if you often carry the toolkit around, this extension might be useful to you, making the box closable with a latch. All parts are printable without…
Copyright Please note that this model is a remix of a printable posting I originally found in the library of User @M7MD5115 . The original model has been removed though, creating a possible violation of the Creative Commons Attribution…
This is a storage tray for the iFixit Mako Driver Kit with its original case. It a 5x3 tray for the Gridfinity system by Zac Freedman . This does take up more room than Zac's model for the kit but this allows for easy transport and…
About A simple yet secure holder for the iFixit Mako Precision Bit Set for the Ikea Skadis pegboard using the Skadis Ultimount connector. The original design was based on the iFixit Wall Mount (Thingiverse) by TinkerLifeProjects . Neither…
A mixed bag of our favorite avian warriors! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
Sako style handguard airsoft ar-15. The one that is about/is introduced to service in Finnish(13" long) and Swedish(9.5" long) armies. Use as is or with upper, (green and brown in pictures)…
This is a 3D printed Case for the OpenDTU Breakoutboard by blinkyparts.com: https://shop.blinkyparts.com/en/OpenDTU-Breakoutboard-Your-evaluation-for-your-balcony-solar-system/blink237542 The OpenDTU breakout board can be used to read out…
Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
Safety first! A construction hat/hard hat for #3DTakoTuesday to wear, while entering the work zone. The hat replaces 3dtakotuesday.top.mm.stl. See here for more accessories and information for #3DTakoTuesday:…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
USB Type-C Female Breakout Board Mount / Holder This is a sleek and minimalist mount designed for a popular 4-pin USB Type-C female breakout board (V, D-, D+, G). If you are tired of messy holes in your DIY project enclosures, this holder…
I got a request for a 30-06 ammobox of the new model i make. The spacing is 20pcs/86,50x12,60mm. I made a o-ring to fit the lid but it's made for 2mm o-ring string if you prefer that. The hinge and latchsystem is made with 2mm tig-welding…
Ozito PXC Battery Mount \ Breakout If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
After the release of the the “ iFixit Mako Driver Kit box frame ” I asked myself, why the heck did I never make a version based on my parametric “ Rugged Box ” to fit the foam insert of the kit. So, I did it now. I included the lid in two…
AEG/RIGID Battery Mount \ Breakout You will need a couple of M3x10 bolt and nuts if you want to use the terminals and some of these connector + wire https://www.aliexpress.com/item/1005003770642780.html Updated new -…
Designed this case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…
🇺🇸 Welcome to the Midwest! St. Joseph's Cathedral of Sioux Falls, South Dakota in the United States is a catholic temple built in the XX Century and recently restored. It is one of the greatest landmarks of the city, along with the Sioux…
This is a remix of Tactical Grizzly's Ifixit Stand with an extra Slot for the Back cover so to has a dedicated place. I thought the model was perfekt and only wanted a place to store the lid of the IFixit Mako. The extra wall I added…
Ninomae Ina'nis' mascot from Hololive. The halo is excluded from the design for the purpose of 3D printing; also, the model is missing a leg when it should have eight, like an octopus. I plan to edit the model in the future to fix the leg…
Milwaukee Battery Mount \ Breakout If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
🇵🇱 Witamy w Polsce! Welcome to Poland! This model was designed by Daniel Muradás. The Church of Our Lady Assumed into Heaven (also known as Saint Mary's Church; Polish: Kościół Wniebowzięcia Najświętszej Maryi Panny, Kościół Mariacki ) is…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Bring cyberpunk to life with this stunning 3D printable figure inspired by Motoko Kusanagi. Designed with a perfect balance of realism and stylization, this model captures the essence of a futuristic elite operative—calm, precise, and…
Holder for XY-MOS D4184 Power MOSFET breakout module. Snap-in, no screws are needed to hold the module in place, but holes for small screws are included for extra security. I used 1.8*5.6mm sheet screws. Print Settings Printer Brand:…
A baseball cap for #3DTakoTuesday to wear. The hat replaces 3dtakotuesday.top.mm.stl. This design is a derivative of Shawn Bradford 's Lakers New Era Cap . See here for more accessories and information for #3DTakoTuesday:…
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…
A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…
I loved the excellent model by @JohnD920 for mounting the iFixit Mako Driver Kit to the Honeycomb Storage wall—but I wanted to be able to (optionally) leave the lid off the kit, and be able to just choose driver bits directly from the…
The breakout numbers layout is designed to create a visually appealing phone number sign that can be placed on a vehicle or in any other places like office or boards… This layout is crafted to attract attention and make your the phone…
I was searching for a Gridfinity holder for my iFixit Mako set, but wanted to keep the original case as I like this very much. This design is also very much inspired by iFixit Mako Screwdriver Set Gridfinity Holder by Tactical Grizzly ,…
iFixit Mako Driver Rugged Box Frame I wanted something with better hinges / latches than the iFixit Mako Driver Kit box frame so remixing it with Rugged Box (Parametric) seemed like an obvious solution. This uses the dimensions from the…
Here's a honeycomb storage wall Ifixit Mako 64 piece mount that allows you to put the cover on the back giving you full access to your tools without removal. Requires 2 of the hollow inserts for mounting and supports enabled. I put the…
Aarakocra rouge dnd miniature. There are two file versions: one with a base and one without. I sculpted the model in Zbrush and scaled and rendered it in Blender. I recommend printing it using a resin printer. Timelapse on how I made it:…
Case and camera clip for the Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM The separately printable clip, which clips over the processor board, can be used to adjust the angle of the camera.
Sako style upper for AR-15, fits Cyma CM.097 lower. The one that is about/is introduced to service in Finnish and Swedish armies. All the parts are compatible with CM.097 upper. Use AEG barrel nuts with it. Versions: “Swedish” is one…
The assassin's teapot: it has 2 chambers, where by closing the inlet hole of one only 1 liquid pours; when closing the other hole the liquid in the second chamber pours. Slice it in a slicer and you will see the separating wall (including…
This remix of the "Stackable Shipping Container Desk Storage Compartment" by 3D Mieks features the Chromakopia logo from Tyler, the Creator's new album on the side of the container. It retains the original stackable design, functional…
A Remix of a3lex "Breakout connector for Ozito powe rXchange 18V Lithium battery pack" Main changes are extra holes for mounting and I reduced the amount of material around the battery tabs. Battery tabs are made from copper pipe saddles…
This model is compatible with the lego system.
BOMB1 isn't good and Egg needs supports.
A replica of Tyler the Creator's shipping container.
I made this for Halloween some time ago, as I've always been a fan of creepy Japanese horror films. I designed it to sit flat on a table top or other surface. The photo's are from a talented guy who goes by vinceDeh. He did an amazing…
Shishio Makoto is a character of Anime Rurouni Kenshin
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
Diseño Sailor Venus, conocido como Minako Aino, es un personaje icónico en el mundo del anime y manga, y este modelo captura su esencia de manera excepcional. Uso Ideal para coleccionistas de figuras de anime y especialmente fanáticos de…
remake of the ako d6. I made it on a mp mini at .175 solid. Print instructions Category: Dice Summary remake of the ako d6. I made it on a mp mini at .175 solid. Print Settings Printer: MP Select Mini Rafts: Yes Supports: No Resolution:…
USS South Dakota was launched June 7,1941. South Dakota took part in in many battles in the pacific such as Battle of Santa Cruz and Iwo Jima. Print Settings Printer: Prusa MINI+ Rafts: No Supports: No Resolution: .05 Infill: 100%…
I wanted to place my Ifixit Mako driver kit to my honeycomb storage wall so I designed this holder.
The holder has three attachment points and is therefore bombproof on the honeycomb wall. Small clips were added to the side where you can store tweezers, spudgers or other small tools. The lid can still be stored at the back. Just print…
Dewalt Battery Breakout Wall Mount If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
This is a socket for a USB Breakout Board. Fits in a 15mm hole. The endcap has a diameter of 20mm, so everything is closed. I bought these boards: https://www.az-delivery.de/en/products/mcu-micro-usb-schnittstelle Update: Added the .3mf…
This is a 3D-printable model of the Mako roller coaster train at SeaWorld. It includes the train body, seats, and track. Scale is adjustable, but the model was designed with common FDM printer sizes in mind. Perfect for collectors, theme…
There's only one STL. Print two copies normally and two addition copies mirrored in your slicer. Takes up a 3x5 slot area. Corners can be stacked when not in use and they are tall enough to help support adjacent modules. Uses dramatically…
A Saisen Bako is a large wooden coin box, commonly seen in Japanese shrines just in front of the spot where people stand to pray. The design allows for coins to be easily tossed in, but tough to get out. This is a money-box sized version…
This is a simple, compact and sturdy box for making breakouts for Ethercon. Specifically made for Neutrik NE8FDV YK . I've printed the main body on it's face (connector side) and the lid on it's back so that the two pieces complement each…
Tako-Chu's name comes from the Japanese words tako (タコ ? ), meaning octopus, and chu (ちゅ ? ), onomatopoeia for a kissing sound, referencing the shape of their mouths. Print upright! May need some support directly underneath the body. Can…
Pant nábytku – opakovatelné otvory 26mm
The lid snaps in, just screws for mounting the electronics required
Case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The board I designed it off of is ~ 66.28mm wide x 63.3mm long and the PCB is 1.5mm thick. I made the following updates…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Enclosure for ESP32 30 pinwith Breakout Board ESP32 30 pin: https://www.aliexpress.us/item/3256804992462822.html Breakout Board: https://www.amazon.com/dp/B0BQ2N4MSZ Standoffs: https://www.amazon.com/dp/B08F1W3ZXW Hardware:…
Meet #3DTakoTuesday, a cute, stackable octopus with a variety of expressive eye options to fit your mood. "Tako" (たこ) is Japanese for octopus. I designed this to improve/practice my Fusion 360 skills. Feel free to drop me a tip if you…
Pi Pico Sumo/Battlebot using a Wukong RP2040 breakout board. This is a working progress, so for now, here are the print files for the chassis and the 8T (16T including both sides) and some basic control over WIFI. Using a web browser, the…
These avian people/monsters are a challenge to fight. Supports required. Scale as needed. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Updates [v1.2, 10/31/2122] - 5 New Topper options! “Central”, "Parallel," “Carousel,” “Cross,” and “Card.” Card - Simple thin slot for sticking a laminated paper sign or cardstock into. This Topper still has a 12mm deep hole, but I made…
Come support these models over on Patreon Buy my time, Not my models. Two-wide cargo container jump ramps with added bits for Gaslands. Separate .stl for the breakover piece to fit (no glue needed) these smoothly onto Sablebadger's…
The legendary Nissan Skyline GTR Hakosuka, a 1970s icon brought to life with timeless retro style. Classic Japanese design, boxy silhouette, and the true essence of a JDM collector’s dream. Usage & Links Personal use: print freely.…
A 4"x4" mini lithophane of the album Chromakopia.
Remixed case for XY-MOS Power Mosfet
https://www.myminifactory.com/frontier/the-battle-of-pryderok-support-free-3176 [FRONTIER] THE BATTLE OF PRYDEROK - FREE 28-32mm for personal use only. Each model, were sculpted with both resin & FDM Printing in mind Support Free Models;…
A remix of JohnD920's iFixit Mako mount for RostaP's Honeycomb Storage Wall to reduce the amount of plastic used.
North Dakota, USA (ND) Topographic Relief Map with Rivers and Coastal Waters North Dakota, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
A re-implementation of daveh_dev's magnetic mount for the iFixit Mako driver kit using Multiconnect for Multiboard and direct-to-wall compatibility. Like the original, this mount lets you to quickly grab the whole kit or just remove the…
This is a dummy 18650 battery with banana jacks for charging other 1s lipos. You need: two small screws two 4mm banana jacks some copper wire Both screws serve as battery contact. You may have to cut the banana jack soldering connections…
Radio Box for Mayako MX8E E-Buggy – includes integrated transponder mount designed for MYLaps transponders. Designed for a clean, secure install of your electronics while keeping your transponder neatly positioned and protected. Perfect…
After seeing the SillyPilot, I knew I wanted the emotional response of its satisfying break action and auto ejection, but I also wanted the fantastic priming feel of the Pilot's predecessor, the Knockout - which happened to be the only…
South Dakota, USA (SD) Topographic Relief Map with Rivers and Coastal Waters South Dakota, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
A dramatic 3D printable diorama featuring a powerful dinosaur breaking through the gates of a ruined park entrance.
In honour of Pokemon Go's Slakoth Community day (June 8th) I have knocked up a Slakoth one piece and multi-material model Shouldn't need support, except maybe its back toes, roll the dice! Print instructions Category: Creatures
Because I'm a T-nuts system fan I had to remix this one. Two mounting holes should be more than enough to keep this one steady on the Skadis. Took this model because it's not a massive print and it looks really nicely finished with the…
Essentially a “shoe" that adapts your existing Mako Driver 64-bit kit to Gridfinity. It made more sense to me to keep using the existing layout than design a new thing from scratch. You can leave the lid on, but I prefer to stick that to…
This is the original Breakout Type S model extracted directly from the game and fixed up in MeshLab. This is my first design, so it's probably not perfect. If you should have any questions, please feel free to comment. I used support for…
Simple case for the OpenDTU Adapter Board: https://github.com/dokuhn/openDTU-BreakoutBoard Printer must be quiet precise for the Snap on lid.
This design is for the esp32 dev microcontroller and a breakout board. It may need to be scaled to fit your particular breakout board.
![Leonin n Aarakocra [SUPPORT FREE]](https://media.printables.com/media/prints/1079353/images/8162210_f218a8d1-b708-4887-9a78-61d8a5ff1612_f3b2b59d-9c73-4d0c-82aa-95b86aefbc5c/battle-of-pryderok_free.jpg)
