alza pacco lamellare am6
alza pacco lamellare am6
- Pobrania
- 226
- Polubienia
- 5
- Ocena
- 0
90 modeli
alza pacco lamellare am6
Nevyhovoval mi jiný adaptér, který se s cívkou zadrhával, tak jsem si zkusil udělat vlastní.
Use StandBy to view information at a distance while iPhone is charging You can use StandBy to turn your iPhone into a bedside clock, a photo frame, a display for viewing widgets or Live Activities in full screen, and more. - iPhone User…
Calzador mediano de 23 centímetros con un espesor de 2 cmm y fácil de imprimir
Simple spool for Alzament ReFill Filament. Print the file twice as it is just one half of the spool. Then simply press both halves onto the spool. Tested on Alzament PLA ReFill - but I assume it will be the same for other materials made…
Since I couldn't find any replacement parts for my old IKEA Benno shelf, I simply designed my own shelf pins for 5mm. The vertical part is slightly longer to better balance the pressure. Print the model upside down; it will adhere better…
Its can still be printed without supports but due the branding we recommend ut use them for that part - spool narrow Print it at least in PETG - you will need some heat resistance 25% infill + is recommended
AlzaPower M100 MuAlzaPower M100 Multi Charge Power Delivery 60W bílá za 799 Kč - Nabíječka do sítě | Alza.czlti Charge Power Delivery 60W bílá za 799 Kč - Nabíječka do sítě | Alza.cz
Table leg extensions. For legs no wider than 40.5 mm. Specifically designed for the following product. https://www.amazon.es/gp/product/B076P6XP2T/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 This model can be installed with and…
Holder for AlzaPower extension cords
Description Steam Deck dock for Alza Power 5 in 1 USB C Hub. Dock + Lids in separate files. USB Hub parameters: 105mm x 34mm x 11.5mm (LxWxH) https://www.alza.cz/alzapower-usb-c-dock-station-5v1-cerny-d6592232.htm Print settings: Printed…
Hello, I have an Alza dummy for you. An amazing character based on the Alza e-shop model. This is free inspiration. My kids love the character :-). It uses very little material. Good luck with the printing! I used PLA/PETG as the…
Description Steam Deck dock for Alza Power 6 in 1 USB C Hub. Dock + Lid in separate files. USB Hub parameters: 116mm x 34mm x 11.5mm (LxWxH) https://www.alza.cz/alzapower-usb-c-dock-station-6v1-cerny-d6592234.htm Print settings: Printed…
printed on Creality K1C, sliced in Orcaslicer. 'Sroub2' print 3x Added v2 with Slot and Tab. Width for inserted refill: 57-65mm, other dimension in gallery
This Filament Spool Ring (Alzament) is a simple and effective solution to reduce friction inside filament spool hubs , especially for cardboard spools. The ring is designed to be clipped directly into the spool hub and secures itself…
Simple holder for the powerbank from Alza on the Ikea Skadis jednoduchy úchyt pre powerbanku z Alzy na Ikea Skadis inner size of the holder is 60mm x 28mm x 33mm/height/ vnútorný rozmer je 60mm x 28mm x 33mm/výška/ link to powebank:…
Custom shelf for Alza Slatwall monitor mount rail. https://www.alza.cz/alzaergo-swp110-lista-bila-d6097296.htm They do sell their own shelf and pen holder, however since I have my own pen holders and space on my rail is limited these…
Držák nabíječky pod polici. Pasuje na AlzaPower MG8103CA Fast Charger 100W bílá. Pro upevnění k polici použity šrouby do dřeva 4x30 a s rezervou vyjdou do lamina tloušťky 18mm.
Úchyt ramena mikrofonu na kulatinu od držáku monitoru. Kulatina je 31mm průměr a čep od ramene mikrofonu průměr 11mm. Původně konstruované na AlzaErgo Arm T10B s mikrofonem Trust GXT 252 + Emita Plus Určitě budou kompatibilní i jiné…
Jedná se o vánoční ozdobičku na stromeček ve tvaru loga Alza.cz. Ozdobička má na zadní čísti možnost provléknout provázek. Printing without supports, Infill: 15%. Share your printed model.
Do podstavce pasují 3L balení https://www.alza.cz/maxi/alzaeco-universal-3-l-60-prani-d5614757.htm Spodní odkapová miska, do které se vejde odměrka z DM : https://www.dm.cz/denkmit-odmerka-k-pracimu-prostredku-p2099999036112.html Tisk bez…
Tired of the "Alzament Wobble" on your Mini? We all love the Alzament PLA for the good price, but if you are a Prusa Mini owner, you’ve likely noticed a slight compatibility hiccup. Because Alzament spools have a unique width and center…
Avevo la necessità di riparare il meccanismo alzavetro di una Range Rover Sport del 2005, dato che il ricambio non era disponibile o quelli compatibili in rete avevano tempi di spedizione troppo lunghi, ho deciso di progettare il ricambio…
Way to attach Laptop to AlzaErgo Arm T05S, includes Fusion360 source file
couldn't find them anywhere so i designed one from the original model
Table lift supports. I made this for IKEA LAGKAPTEN / TILLSLAG . I needed a little high. You could adapt to another size. Nice to help you!
Alza vánoční vykrajovátko vhodné na jakékoliv těsto, nejenom pro vánoční cukrový. Printing without supports, Infill: 15%. Share your printed model.
My third monitor died recently so I've repurposed the arm for my new mic! It works surprisingly well because this particular stand can move very freely. Originally made for the AlzaErgo T10B, although I believe all of the AlzaErgo monitor…
Nabíječku je možné koupit zde: https://www.alza.cz/alzapower-m420-multi-charge-power-delivery-130w-cerna-d7449340.htm rozteč otvorů pro montáž 50-65mm Tisk z PETG, kvůli teplotám nabíječky nedoporučuji použití PLA. počet perimetrů:4
Tested with PETG Do not print from PLA! The heat from the MagSafe charger will loosen the stand's grip.
AlzaErgo Arm D35B holder for SteelSeries Arctis Nova 7 USB dongle
Can be printed without support on one side, could fit other drill Provided the fusion file if u want
Unleash the mystical power of the void with this incredibly detailed 3D printable statue that brings League of Legends' most enigmatic champion to life on your desk. This masterfully crafted STL model captures Malzahar's flowing robes and…
Simple mount for the AlzaPower M200 90W charger. I used it to hide the charger under my standing desk. You will need 4 M3 screws for mounting.
This print is a part of the whole VESA mounting solution. Prepare: Item Count File Note VESA mounting plate 1 - I have used 2mm steel. PETG plastic is possible (see example my Ikea print) Plug 1 mount.step printing instructions below…
Background I have recently obtained an AlzaErgo Slatwall rail and I wanted to mount a home-built LED lamp on the rail. This led me to creating an articulating arm which could be mounted either on the rail itself or on a plain wall using…
Rychle a jednoduše se tiskne. Vytiskl jsem z PLA, při výšce 0,1 mm, doba tisku ca. 20 minut. Pro lepší fixaci doporučuji kapku lepidla. Fast and easy to print. I printed it in PLA with a 0,1 layer height, it took about 20 minutes. Use a…
Es una bandeja con tres departamentos en forma de suela de zapato que hace mucho servicio.
CALZA SILICONE BIQU H2 V2 https://www.amazon.it/PRO-Gomma-Siliconica-Addizione-500/dp/B07H5S9VP5/ref=sr_1_6?keywords=silicone%2Bda%2Bcolata&qid=1703446348&sr=8-6&th=1
I have designed these replacement parts for my AlzaErgo monitor arm, but I didn't need them in the end. Nevertheless I have decided to publish them as a baseline. I have printed them from PETG and found out, that this material was too…
These large AlzaPower chargers tend to sag down a lot when plugged in horizontally. They also don't hold at all in plugs that downward-facing (located in some trains). My model solves, or at least greatly improves, these problems by…
Sirven para subir unos mm los cristales de las neveras de BAlay y que quepan mejor las botellas de 1.5 litros.
Necesitaba subir mi zapatero unos centímetros para que el robot aspiradora pasara fácilmente. Con estas alzas ya lo tengo listo. Tienen una agujero en la base para evitar atragantamientos y ahorrar algo de plástico.
Holds an AlzaPower 10k mah power bank on bike's head tube to charge your phone
IKEA Tertial lamp: https://www.ikea.com/us/en/p/tertial-work-lamp-dark-gray-20355434/ Alza monitor arm: https://www.alza.hu/EN/alzaergo-arm-t05b-d5626004.htm?setlang=en-GB Printed in TPU.
I deliver print with PETG at 240 degrees, without supports, on a 90 degree grain plate and with a print fan.
The charger holder can now be attached to the HSW using 4 connectors, the lid can be printed with MMU for a nice look and visibility of the indicator light. The parts need to be glued together.
80% gyroid infill, PETG, 0,2mm layer height. Printed with no issues, ive been using it for a month now Printed with ender 3 V3 KE
Alzament Refill Spool Praktická, rozebíratelná a znovupoužitelná cívka navržená pro refill filamenty značky Alzament. Hlavní vlastnosti: Snadné složení cívky: Cívka se skládá ze dvou dílů, které se pomocí závitu jednoduše sešroubují.…
AlzaPower G400CA Fast Charge 35W černá a Galaxy watch 4 charging puck
Please like model, if you are satisfied. EN: Holder for headphones for AlzaErgo Arm monitor mount. Hole have 35,5mm diameter. Including mic holder (4mm). Print was with 0.6 nozzle, variable layer height (base 0.4). CZ: Stojan na sluchátka…
Simple pencil box that can be used on alzaergo slot if you have two of them and one is free. Print the holder with supports, otherwise, should be easy to print. Filament used: Filament PM https://www.filament-pm.cz/
Easy to print. So your powerbank doesnt get scratches. :)
If you buy AlzaErgo Table ET3 Essential with 160×80 cm desk and mount it in the middle of the desk, the handle to lift and lower the table will be too short and you won't be able to rotate it. This extension is placed between the hex rod…
AlzaErgo Arm D35B holder for LED controler
Ho ricreato la vite di fissaggio di una alzata per WC per anziani, visto che il ricambio non è disponibile. Stampato in ASA in orizzontale con supporto. I recreated the fixing screw for a toilet seat riser for the elderly, as the spare…
Questa boccola serve per collegare il pomello nella maniglia alza vetro posteriore ford fiesta. Realizzata in pla con una restenza del 20%
compatible with autorewinder grippy-v2 prototype for better grip
Clamp for Liftor height adjustable desk and AlzaErgo cable chain. Clamp and Magnet version available. Use 10x2mm magnets or smaller. Printed with Bambu Lab PLA Matte Charcoal on Bambu Lab A1. Printed on the side with Slim Tree Support.
A simple gridfinity holder for an alzapower screwdriver and mini driver bits
I bought the AlzaErgo Slatwall rail and holders to mount my LCD screens, but the original mounting system did not fit my needs. First, my wall is from aerated concrete (porobeton), so I wanted multiple attachment points. Second, I wanted…
I do not want to have each device to have its own small battery so i converted my Alza heater remote control from small 2025 battery to AAA battery. CU wire for battery connection is used and 2.5x8mm screw to hold every
Made this to better organize space on a video camera rig based on the Alza ErgoArm DE30 Pylon. It consists of two parts — base and body — to avoid supports and allow flexibility for body variations. Each part has shallow 1.8 mm holes so…
Holder for USB AlzaPower charger
This "VESA Mount Enforcer" has a specific usage in this case. There are no extra holes to mount to the wall. I've bought two AlzaErgo F240B Super Slim VESA mounts to mount two of my miniPCs (HP terminals) to the side of my table. Since…
Ho ricreato la vite e la staffa di fissaggio di una alzata per WC per anziani, visto che il ricambio non è disponibile. in alcune foto si vede il pezzo originale a sinistra. Stampato in ASA in orizzontale con supporti, ma sembra più…
Design concept The battery charger holder is designed to secure a multi-slot charger in a fixed position while ensuring easy accessibility to the battery slots. Its robust design allows for compatibility with Alza and other similar CC-8…
Use Multiboards Bolt-Locked Bracket to mount on your multiboard.
With floor pads to reduce movement - 25x25x5mm (Action). Bolt used M6x20, + screws.
Holder for USB charger - AlzaPower M420 Multi Charge Power Delivery 130W Initialy designed for holding it screwed to the bottom of shelf/table. Probably suitable for hanging on the wall also.
The story behind the project This project began as a very special collaboration between my father and me. My father is 81 years old and belongs to a generation of draftsmen who learned to design with pencils, compasses, rulers and set…
Alza & Alzament supporter spoolholder cap. With color changer: Easily paint like shown. Without color changer: Can pause print and switch filament for white and blue layers.
Držák na mobil - rozměrově IPhone 17 + original silikonové pouzdro. Umístění na tyč držáku monitoru zn. Alzaergo. Výřez na připojení USB-C konektoru. Tisk z PLA, 3 perimetry, výška vrstvy 0,2, výplň gyroid.
Skadis mount for AlzaPower Metal Mini USB-C Dock Station 8v1 Dual Screen vesmírně šedý za 1 799 Kč - Dokovací stanice | Alza.cz .
Made this to better organize space on a video camera rig based on the Alza ErgoArm DE30 Pylon. It consists of two parts — base and body — to avoid supports and allow flexibility for body variations. Each part has shallow 1.8 mm holes so…
Questa boccola serve per collegare il pomello nella maniglia alza vetro posteriore ford fiesta. Realizzata in pla con una restenza del 20%
Tired of the "Alzament Wobble" on your Mini? We all love the Alzament PLA for the good price, but if you are a Prusa Mini owner, you’ve likely noticed a slight compatibility hiccup. Because Alzament spools have a unique width and center…
This "VESA Mount Enforcer" has a specific usage in this case. There are no extra holes to mount to the wall. I've bought two AlzaErgo F240B Super Slim VESA mounts to mount two of my miniPCs (HP terminals) to the side of my table. Since…
Holder for USB charger - AlzaPower M420 Multi Charge Power Delivery 130W Initialy designed for holding it screwed to the bottom of shelf/table. Probably suitable for hanging on the wall also.
With floor pads to reduce movement - 25x25x5mm (Action). Bolt used M6x20, + screws.
Use StandBy to view information at a distance while iPhone is charging You can use StandBy to turn your iPhone into a bedside clock, a photo frame, a display for viewing widgets or Live Activities in full screen, and more. - iPhone User…
Alza para poder poner los libros en 2 filas, de manera que se puedan ver ambas en la estantería, optimizando el espacio. Las medidas son 208 x 70 x 75. Está pensado para libros tipo manga y similar. Diseño resistente y sencillo para…