279 modeli
Shank size is 8 mm. It can easyly be changed into the file (centring-mandrel.scad). This is my first model with OpenScad.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
You can remove the background and have only the text or scale it up or down
Wydruk około 8,33 €–10,18 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Airsoft Sniper VSR piston and spring pin. I have 2 variants of piston (both work even on stronger springs) And the pin, it is better to put a bearing or a…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena jednego wariantu
This was created so I could have my photography backdrops rolled up and I could quickly change them out. It is created to be used with 1.25" PVC conduit and an 8" long 3/8" bolt and 3/8" nut. I provide the scad files so one should be able…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
Dear Printers, the holder specs are: M4 mechanic screw holes 4mm Wallscrews 4x M3x14 screw slots for additional mounts integrated PETG Material with 0,2mm layer Tested with ~15kg / holder Holder can also be used with:…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Druck-Tipps: mit drei Außenkonturen drucken für bessere Stabilität mit Hilfe eines Höhenbereichs-Modifizierer zwischen 4 mm und 6 mm mit 6 Außenkonturen (Perimeter) und 5 massive Basisschichten drucken, damit der Haken für die Wandschiene…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
case study model i made as an architecture student
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
Die Tonie Wandregal Halterung ist eine kompakte und funktionale Lösung zur übersichtlichen Aufbewahrung von Tonies an der Wand. Jede Halterung steht für sich und sorgt für ein aufgeräumtes, ruhiges Gesamtbild. Jeder Tonie wird magnetisch…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use this clip to mount cables to the roof rack. A little squeeze with some pliers and this fits perfect.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
I previously owned a SpaceNavigator and 3D printed this handrest . Unfortunately, I could not find a similar handrest for the SpaceMouse Compact. So I designed this part. It is tested with SpaceMouse Compact 3DX-600053 (corded version). A…
Didn't find this model on Printables so I decided to upload Andrey's stl file here. Watch the video for assembly and tips for rolling
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…
Grand Theft Auto San Andreas Decor
This tool will help determine the size of a ring. The accompanying OpenSCAD code can be used to generate other sizes and ring models for testing. The sample gauge rings include a debossed number on the inside of the band to denote the…
Dieses moderne geometrische Wandregal kombiniert minimalistisches Design mit praktischer Funktionalität. Durch die versetzt angeordneten quadratischen Fächer entsteht ein einzigartiger Blickfang, der sich perfekt für Wohn-, Schlaf-,…
UPDATES Step file of the assembly has been added 2023-08-05: NOTE , if you use cardboard spools, try and keep the spool off of the very edge of the holder (with the two very thin parts on each key); Cardboard spools tend to be hollow in…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
See “all parts” stl file for printing orientation.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I got 3D scanned by NYCAP3D while at the CDFAM Symposium in New York City, October 2024 and I wanted to make something a bit more functional with my 3D model. NYCAP3D use a mobile scanning setup that has 162 Canon T7i 24.2 megapixel…
I want to make some rings but if they are thin, they are difficult to hold. Moreover if you want to make a nice uniform surface the easiest thing is to mount it on a drill and use files, sandpaper to smoothen the outside. So you insert a…
🖤 Modernes Wandregal – Versetzte Ablageflächen
Hexagon Regal für Funko Pop Figuren. verschiedene teilstucke die ineinander verbunden werden mit Verbindern. Mit Plattformen und auch ohne einfach ineinander stecken wie man es möchte. das innen Teilstück sollte transparent sein und wird…
An in OpenSCAD designed electronics organizing grid-box system. You can export a box of any size. All boxes are stackable. The outer size of a box is always a multiple of the size of the base unit (1x1x1). Have a look at the Github…
Ich habe die Handpose von Andrew Tate für einen Freund nachmodelliert.
Present for my son's friends on their birthday. Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BÁSICO from Ctrol 3D in colours Yellow, Black and White. Clolours: Yellow thick 2mm, Black 1mm and White 0.8mm
Hier habt ihr mein designtes Wand regal in Hexagon form
I use this handrest but missed a soft top part and a other one for more friction on bottom and TPU is the perfect candidate for both. I also reshape the dust cover in order to be more TPU print friendly. Printing Info for TPU In order to…
I recommend printing PETG, 4 perimeters, 4 upper and lower layers, filling 30-40%
Ich habe diese Verkehrsschilder mit sechseckigem Mittelteil während meiner TikTok -Livestreams erstellt (FreeCAD und Entfernen der Supports). Die 3D-Datei ist für den Maßstab 1/120 (TT) erstellt. Ständer sind nicht enthalten, man kann sie…
I wanted to use the OG handrest this is remixed from, but had the Wireless Edition which is bigger than the compact one. I have model 3DX-600044 and don't know if it works for any other models. The base ring was also enlarged to press fit…
Source: https://www.models-resource.com/pc_computer/grandtheftautosanandreas/model/29600/
measure the id of the ring, and use the size up from that. The flex in the fingers will hold it in the center. an M5 bolt goes through the center and gets held in the drill chuck.
This design uses a standard NEMA17 stepper motor as a 4th axis for a standard CNC 2418/3018. A custom deisgned mandrel serves to hold a ring in place while a standard 30 degree V-engraving bit is used to engrave soft metals such as brass.…
Original model by Rockstar Games. Cosplay prop for the true OG's, straight from Emmet. Comes with a texture wrap you can print on paper (although i would probably recommend a vinyl wrap if you can pull it off, paper tends to absorb PVA…
Salamandre tribale en silhouette, parfaite pour décorer une chambre, un salon ou même une terrasse. Le modèle fait 5 mm d’épaisseur , ce qui le rend bien rigide et simple à manipuler après impression. Petit rappel : laissez le plateau…
Very soon I will be adding more icons from GTA SA, I plan to add most of them.
"Ohh shit... Here we go again!" - CJ
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Andrea Kimi Antonelli from Mercedes . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
Have a look at the complete skeleton here: https://skfb.ly/p7uv7 3D scan of a Protoceratops ( Protoceratops andrewsi ) skeleton. Protoceratops andrewsi was a horned dinosaur (Ceratopsia) the same group to which the Triceratops also…
(V.2 will soon be available, as soon as I have made a testprint...) This is the first build I publish. I dont think I will change anything but you never know. The superstructure is intended to be built with wood... only the hull will be…
After printing Drekenthai HieloRey's Expanding Mandrel, I realized I had a lot of filament spools that have an inner diameter of around 73mm. Those spools tended to “walk” on the Expanding Mandrel and rather than risk having them fall off…
Note: This model was imported from Thingiverse where it originally used the “Customizer” add in. Fear not, it can still be customized by downloading the .scad code and open it using OpenScad! ------- Hats off to AndreasBastian's…
Model I made this handrest to raise my 603 with a Universal stock. It is parametric to help suit your needs, and everything can be used in combination but it is fully modular to give you options. BOM For the 10 mm base setup: 1x M5 HU nut…
Die Losi Schaufelreifen passen sowohl auf den MiniT 2.0 als auch auf den MiniB 2.0 und machen richtig Spaß. Außerdem halten sie sehr lange und nutzen sich kaum ab. Viel Spaß damit.
Das ursprüngliche Modell von POMI ist wunderbar, leider sind bei unserem Baumarkt die Standardrohre nur in anderer Abmessung verfügbar. Dieser Remix ist für Rohre mit einem Durchmesser von 23,5mm bei einer Wandstärke von 1,5mm. Diese…
2 mandrels with ring sizes 4 -13 and one ring sizer set (finger gauge set, or ring sizing gauge set). all the STL files as well asn the dusion master and some instructions in the fusion file. I made this to be able to size peoples'…
Two piece screw together ring mandrel size 3 to 9, (2 and 10 at very ends).
There is an revised Hull part 9, it now has mounts for the motors. I also provided an addon if you already have the part printed. Gears and belt are also provided... the belt must be printed in TPU. The main reason I made an updated hull…
Print upright. No supports required.
I didn't want to spend $40+ on a bending mandrel to use for 4 tubes one time, so I drew this up quickly. There are bends for 90 and 45 degrees, as I figured 180 wasn't that commong anyway. It's set for 14mm OD tubing. Smaller should work…
Wandregal : Ablage art für Lautsprecher ect. Wandmontage regal Druck Mit PETG oder ABS Für die Abgebildete Lautsprecher reichte PETG aus Größe selbst verieren 120x120 oder ähnliches
Küchenhacken für Ikea Wandregal
Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy
Modernes Wandregal mit Schlüsselhalter. Es sieht gut aus und ist praktisch, z.B. für den Eingangsbereich. Ich selber konnte das Modell nicht drucken, da mein 3D-Drucker (Prusa MK4) ein zu kleines Bauvolumen hat. Trotzdem würde ich ein…
Please see details as per the version whit is remixed from. It allows for the Wireless version of the space mouse to be used.
I designed this part to, possibly, substitute the mandrel from the model https://www.printables.com/model/248031-cnc-24183018-4th-axis-and-ring-engraving-mandrel
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
length 130mm missing layers on photo is printer fault not model
¡Consigue tu llavero GRATIS! Estamos emocionados de ofrecerte la oportunidad de obtener un llavero único sin costo alguno. Descarga nuestro archivo STL de llavero, imprímelo en 3D y disfruta de un accesorio personalizado para tus llaves.…
This is for custom watercooling tube bending with acrylic or PETG, allows you to get a 90 degree bend with a 25mm radius. This was made to fit 14mm tubing, I have not tried bending a smaller tube on this. I printed it in PETG and it…
Andrea Doria superstructure Deck parts numbers from stern to bow DECK GUIDES FOR DECK 4 GLUED TO DECK 3 I am building the ship Almost complete 10 KGS of weight more kneaded RC MOTOR IN LIGHTING WORKING ON AUTO PILOT PROGRAMMING WITH L2 -…
Andrea Doria life boat Category: 3D Printing
This sign instantly brings back memories of the legendary GTA: San Andreas. With this print featuring a simple color change, you can perfectly decorate your gaming or living room.
As asked by other users I post here lighter STL files of this perfect model.
Stand for Colt 1911 (with Colt markings, check link Brendan Fezuk for files with other markings) but I took away the part where you put the separate cartridges, found it on thingiverse, not here. I dont know why the surface has these…
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal , che sarà molto apprezzata. Questa è una scritta decorativa che puoi stampare in…
This is a mandrel to hold filament spools with holes from 30mm through 60mm. You'll need a 1/4" nut and bolt (about 4" long). I designed it so the end mandrel can be removed without fully unscrewing the nut so it can still be used if you…
The Walking Dead - Andrea
I hope you like it ;-) If it's so, you may help me for making more by a little donation here: https://www.paypal.me/originaldoc Espero que te guste ;-) Si es así, puedes ayudarme a hacer más con una pequeña donación aquí:…
Andrew is a friend at RCT. It is made with SketchUp using the Arial Bold font. 245 mm long x 50 mm high x 20 mm deep. Print instructions No rafts / No support 0.3 mm resolution at 15% infill AMZ3D ABS dark blue
This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…
tried using someone elses photo mount set and it didn't work for what I needed, so I made it different and hope it works
English: This 3D printable party sign features a changeable text area and ergonomic handle – perfect for events, photo booths, and table decoration. A full set of pre-designed signs is in development, along with a generator that lets you…
This is a set of dust extraction parts for the Emco Star. I have been sent the files by its creator, Andre Asselbergs in order to share them on Printables. Andre's original post is below. I’ve seen a few posts here about dust extraction…
A square and a round wire wrapping mandrel. Both go from 25mm to 5mm in diameter in 2.5mm increments. Each tier is labeled with the diameter in millimeters. The handle can be removed when not in use, or glued in, whatever you like.
Weird perisodactyl from eocene Mongolia, featured in Walking With Beasts.
FR V1.1 Le E de Enchor Remplacé par un A de Anchor erreur sur le text du hublot rectifié (merci à @jcjames_13009_134821 pour son œil de lynx) Casque de scaphandre basé sur le visuel du casque réel de chez "anchor engeneering" avec…
90210 - Andrea Zuckerman (Gabrielle Carteris) - 1990-2000 3D printable model.
Benvenuti in Italia! 🇮🇹 Welcome to Italy! This is a collaboration with Italian studio Arche 3D , who kindly shared this model with MiniWorld to be published. The Bell Tower ( Campanile , in Italian) of Saint Andrew ( Sant'Andrea ) is a…
Ford Fairlane - Andrew Dice Clay - 1990 3D printable model.
Contact me/learn more: https://marbleduck.com/ Several years ago, I machined a run of billet HK receiver mandrels. I still get the occasional query for them; unfortunately, I sold my shop when I went active duty and can no longer produce…
Red Dawn - Lt. Col. Andrew Tanner - 1984
I used the 18mm mandrel, but adapted it to a bolt I already had with a 6.5mm hole and created a cone-shaped stabilizer.
DPS Centurion Gaming Chair Hand rest adjustment knob. Mine Broke so I made one
Many reed makers find their hand tires quickly from holding the a reed while working on it. These reed holders make it easier. 3 sizes are available for oboe or English horn reeds. The English horn holders will also work for d’amore or…
This is a Title Card for the Amazing Spider Man Let me know if you have any specific movies you'd like! Category: 3D Printing
This is a bullet for Andew Forseter's Blade Runner Blaster: https://www.myminifactory.com/object/3d-print-deckards-blaster-blade-runner-5694 Each barrel fits 5 bullets.
If youre missing a handrest for the Turtlebeach in either Left or Right, here is one that you can print without supports. You just need 2 M3 Screws of some sort, ideal would be M3x8, M3x10 or M3x12 (as all fit, and the thread is long…
A set of Reloading tool holders/blocks that utilize Zach Freedman's Gridfinity system found here - https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721) The tool blocks include spaces for 21st Century…
Disclaimer: Altough I have tested it use at your own risk. Do not use a steel nut. Always wear safety goggles! This adapter lets you use you use homemade sandpaper disks on you (broken) Dremel 402 mandrels. I designed this because I…
Kleines Wandregal zum Beispiel für Dübel etc. Inkl. der passenden kleinen Kisten Abmessung des Regals 162x162x55 Abmessung Kiste 50x50x50
Ganz einfach an einem Nagel in der Wand aufgehangen. Rahmen: 100% Infill, ohne Support, auf 150% Skalliert, 0,2 mm Schichthöhe Boden: 15% Infill, 150% Skalliert, 0,2 mm Schichthöhe Frame: 100% infill, without support, scaled to 150%, 0.2…
I did not test it on my lathe but the goal, as a mechanical exercise, is to cast the raw shape in aluminium, then transform it (drill, turn, saw) to the PLA model. 2 identical units should be printed. Brim and support on build plate…
Check out my Amazon Page to see what kind of gear I use to make these models! Hey! It's me! This was my first 3D printing-related project, and I documented the entire process here:…
These files duplicate using PLA, PETG, or other filaments, the aluminum FAI mandrel\ form that has been traditionally used in International FAI model rocket construction and competition. WARNING - YOU CAN NOT USE this 3D printed version…
This model was inspired by https://www.thingiverse.com/thing:3290283 This is not a remix but it was created from the ground up. Unfortunately I only had white PETG at that time. A PLA would look much better.
![Modular and stackable Electronics Organizer Box System inspired by Alexandre Chappel [last updated: 2022-11-18]](https://media.printables.com/media/prints/316542/images/2740154_e62e2c61-c96b-4608-9336-71ca6232e7ee/set_render.png)
