3931 modeli
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Not educated in the ways of Pony Lore… So I have no Idea which Pony this is. But I did learn that it is an Alicorn which is a pony with both a unicorn horn and wings. Its main body is white with purple and pink mane. If you know the name…
Prevent your Asus ROG Ally from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…
Since I did not manage to adapt the parts well to my caliper by scaling, I have designed them from scratch. It now fits for my caliper which is 3mm thick. Because I noticed that there is a slight offset to the reference plane (zero…
Easy to get on the ring but won't fall off! Gcode prints one-at-a-time for less stringing!
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
I used PrusaSlicer to split/merge models from https://www.thingiverse.com/thing:4635654 to make embedded text.
Remix of @Boogie. This remix is compatible with MMU This tool can measure M2-M10 screws with a length of 4-120mm
Measuring cup for using proper amount of chemicals (detergent, citric-acid, bicarbonate, etc.) in my household. Volumes: 25 milliliters 50 milliliters
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the…
Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…
Needed a ¼ and ½ tsp for my Miracle Gro for my garden so designed this. No support, print with PETG. Long reach but short enough to fit in a canning jar for storage with fertilizer.
I noticed this model hasn't been uploaded to this website yet. I've tried to contact the creator, but no luck so far. All credits go to: Creator: 3DPrintedAspie Source: https://www.thingiverse.com/thing:2332779
Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…
Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
This small 5 ml measure can be easily stored in the product container. It is easily printed in PLA or PETG. No support required. Please, like my 3D model and/or download it, a small gesture that will perhaps earn me a few Prusameters.…
This set of gauge can be used to measure the thickness of the brake pad without removing them from the car. Gauge range is 1 to 8mm. Gauges can be hold together using a M4 screw + nut. Accuracy will depends on the printer but checking…
Why spend $20 on Hornady's Powder Measure Drain insert, when you can print one for 14¢? Printing Notes Contact area on the build plate is very small. Use a brim. A little bit of wet-sanding may be necessary.
Have you ever had to guess the radius (or diameter) of a curved object? This tool helps you measure a numeric answer to that question! Radius = Caliper Reading X 2.414 How to use: Insert the base of your caliper in the slot of the tool…
Elevate your router for better signal and stability. Single screw fitting. Should be comparable with most screw sizes, use washer to ensure a secure fit. Designed for Asus RT-AX53U router however should fit any router with 84mm - 85mm…
Details removed
The ASUS ROG Ally is a bit too thick to fit securely in a Steam Deck Docking Station. This adapter fits around dock, so that it has a larger front edge to comfortably hold on to the ROG Ally. A Steam Deck will still fit into the dock as…
A simple pegboard mount for a Measuring Tape, with a clip no wider than ¾". Since this peg has to stay connected to the pegboard when clipping/unclipping the Tape, which is a friction-hold, it's particularly important that the pegs are a…
5 ml Meßlöffel für Flüssingdünger Hier ein kleiner Meßlöffel für Flüssingdünger. Die Füllhöhe bis zur Markierung ist 5ml. Mittels des Lochs im Griff kann man den Löffel aufhängen. Schichthöhe = 0,1mm Translation DeepL 5 ml/ (0.30512 in³)…
Just print 4 of the feet for you Leifheit Pegasus 150/180/200 and clip them to the stand. Printed in standard Prusa Slicer settings in PLA. No supports needed.
Der Messlöffel ist mit Markierungen für die Füllmengen 10 ml, 15 ml und 20 ml versehen. Wir nutzen ihn, um den Reiniger für den Saugroboter abzumessen. Zur Erinnerung sind die Füllmengen eingedruckt. Der Löffel passt bei Nichtgebrauch gut…
Never use the wrong bolt again! 😀 I built my MK3S printer from a kit, and then upgraded it to the MK3S+, and there are a lot of different length M3 bolts used. Using the wrong length bolt will sometimes work, only to find out a couple of…
Does require supports for front row of letters.
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
print with PETG Printtime: 1h 15 min
Termomix TM31 cup My original mug fell and cracked. So I decided to make a similar model with the same dimensions.
This is a simple set that allows you to fasten anything to the Worx table using the integrated sliding track. The plate goes into the track, and a 1/4"-20 countersunk screw can be used as the anchor. 2" screws should be good enough for…
Brackets for the Pegasus Ultimate Power Box v2. I designed these so I could make my UBP setup more streamlined and efficient. This set has a few models in it: Bottom “L” bracket - similar to the ones you can buy from Pegasus Top “L”…
Simple mount for my Bosch GLM 50-22 laser measure to Parkside pegboard. It is designed for measure in original sheath. It should fit on other models from GLM-50 series (50-25, 50-27…). Easy print, no supports needed. PETG and 3 perimeters…
If you have allergies or nasal issues rinsing your nose with a nasal shower can really help. The plastic showers from the pharmacy are quite cheap, but the salt they sell with it comes with a lot of packaging waste and is 25x times more…
Om dat ik plastiekzakken gebruik in de Ikea vluilnis emmers doe ik er een klem rond zo dat de zak beter blijft zitten. Comme j'utilise des sacs en plastique dans les poubelles Ikea, j'y ai mis une pince pour que le sac reste mieux en…
Made a holder for my tools used when I'm mesauring for CAD-work. Slots for all kinds of measurement tools and storage devices. If you're lucky, yours will fit too! Printed in PLA, no supports.
Odměrka na kávu, cukr a podobné sypké hmoty (Measuring cup for coffee, sugar and similar loose materials)
I wanted a similar tool to measure the radius of bows on existing solids of unknown design. Something like https://www.printables.com/model/137696-radius-gauge-1-20-mm could be helpful, but I needed it for bows with a larger radius. The…
Asus Z270E IO Shield. Printed on a Prusa XL 5T using PLA 0.4n. The item printed clean, no support or brim was necessary.
Printed on a Creality Ender 3 Neo with 100% infill, without supports and standard PLA.
Simple mount for attaching the HyperX QuadCast to a Asus PG420UQ monitor.
Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…
This is a pocket sized tool for measuring small diameters (2-10 mm). It also has 0.5 cm and 1.0 cm gradations on one side to use as a ruler. Design features The current version has 5 diameter openings from 2 mm to 10 mm, and a 5 cm ruler.…
This is a snap-in enclosure for the Pegasus Power Box Advanced. I did not use supports as it printed fine without and only resulted in a tiny amount of stringing that I shaved off afterwards.
Loved the original sign, but it was still too… measured. I “fixed” that. :)
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
Jedná se o kompletní a funkční model pasující k sadě IGRÁČEK MULTIGO. Lze jej připojit za auto. Na vozík lze připojit originální příslušenství. Nenajdete zde kola a osy a to z toho důvodu, že je to modelované tak, aby to pasovalo na kola…
Box for ASUS ZenBook Duo pen, as description says.
The measuring cup is for washing powder, but you can use it for anything else, loose or liquid. 125 ml no support no brim 3 perimeters material: PETG. works with PLA
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
A removable bracket or the Pegasus Pocket Powerbox (PPB) Micro that clips onto a 1.75 tripod tube The tube clip is just pushed onto the tube and also has a bolt and heated insert to secure further. The PPB is attached to a bracket via two…
A quick and dirty mount for an Asus AC2900 router to fit behind your TV using the VESA mounting points. You will need: M3 x 30 mm screws - minimum 4 off M6 x 25 mm screws - minimum 1 off Customise: The model has not been made easy to edit…
Support needed Not exacltly the same as the original (red) but works well.
Needed a way to mount a Galaxy S8 to my delta printer for use with Klipper Screen. You may get away with printing only 1, however for stability at higher speeds and to keep everything tight on the printer, best to print 2. I've mounted…
Needed a scoop for salt when we was canning that was in between sizes. So here is a 3/4 tsp measuring spoon.
support de mesure pour phmetre lidl - measuring stand for lidl phmetre
Handy scoop for measuring cayenne pepper to put in my quart jars for canning beans. Pretty sturdy and functional. Holds almost exactly 0.9ml of water . Nozzle temp is high in g code. I tuned it to 235 after things got moving. Currently…
This was a quick graduated cylinder for use at bath time for making “potions”
Mounts with countersunk screws on wall. Prints with almost anything, I used ABS.
Made it from ABS, PETG - works well, but want to try some hard TPU. Use "supports everywhere" option
Storage case for Accu-Measure personal body fat tester. Easy print. Use PLA or PETG though PLA should suffice. I added mouse ears in cad program to avoid lifting in corners, snaps easily off when print is finished. Step files added for…
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. Complete new design here available:…
This update to the Treasure Chest Puzzle Box is easier to print, assemble, and remix! Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The…
I found a high number of measuring tools for metric screws. But what about a measuring tool for inch screws, nuts and wrenches? I couldn't find any, so I created one, or better two :-) The tool is created for UNC and UNF threads and…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
You never quite know how much filament is left on a spool. To quickly and easily estimate this, I created this tool. With it, you can find out in seconds if you have enough filament for your next print. New design: better readability…
Overview and goals Flying pegasus is my most sophisticated glider so far. In this project I continued my experiments with single layer wings and stretch this concept to the edge. My goal was to create glider that have build in anhedral…
Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
This is my first attempt at modeling anything more complex than a toy rocket in fusion360. This box features print in place hinges and a snap / latch to hold it closed. The sides have mostly decorative handles. This prints well at .2mm…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE February 24th-Added optional side handles that are…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
This handy angled bed scraper is multifunctional with a screw measure tool integrated in the handle. The screw length can be measured in mm and even inches. There are 3 options for the text available: Embossed Text Raised Text No Text…
Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…
***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Those designs are a set of rings to measure the size of your finger and see what ring size you are most comfortable with. The files are designed and named after the US chart but you can refer to the ring size chart in the illustrations to…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…
Update : In V3 is the complete disassembled backcover of the Ally. Use standard if your PC has problems with the higher detail file ________________________________________________________________ Use V2 - Asus ROG Ally body with more…
Update 01/13/2025 I have added a teepoon-sized cup (5ml). The Tablespoon is around 15ml so you just need to print the 1/16th cup for this.…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
this is a measuring cup cup for when you do not want to do multiplication of division you can just add it
![[REMIX] Rugged box for Bosch Zamo Laser Measue](https://media.printables.com/media/prints/663548/images/5225882_39d18197-5171-412f-9129-d04d28ebab76_f8887cff-ee0e-431b-958d-4d0c448cf769/pxl_20231129_113306422.jpg)
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
