Wyniki wyszukiwania: b8

BB8

BB8 From Star Wars. Few different versions. the M just means I did some offsets in meshmixer

XB8E 2022 Receiverbox (Update july 23th, '24)

UPDATE!!! (July 2024) I am currently working on a new recceiverbox which will fit the 2024-car. As the layout in the car changed (shorter chassis and some modified parts), this receiver-box does not fit anymore. ************************ I…

Pressfit Bottom Bracket BB86 Bearing Remover v2

Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…

Supermicro Slim ODD Bay ICY DOCK MB852M2PO-B Adapter

While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…

BB8 - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

BB8 - Lego Star Wars

Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. Bricks are broken down by their hex color for…

R2D2 & BB8 Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

BB8 Robot

This is my bb8 i made a while back. It talks.It rolls. The head rotates. Basically it’s nearly a fully functioning BB8. there are A LOT of parts, so please refer to the instructables for what prints are what…

Xfinity Gateway XB8 Wall Mount

Remix of my previous submitted Xfinity XB7 Gateway Router for the new XB8. A left and right side model is included.

BB8 - Star Wars

BB8 droid Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so…

Star Wars BB8 puzzle

Hi all here is my BB8 puzzle to go along with the R2-D2... enjoy You will need supports for the head, pin3 end and pin4. every thing else works without, some light sanding might be needed if your printer cant print arches/bridges well.…

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U

1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…

BB8

The cap slides in at the bottom of the model. If you put something heavy in the cap and put it on it stands right up.

bb8 cookie cutter

this is a BB8 cookie cutter I have created a complete series of cookie cutters about star wars don't forget to see the rest of the models and leave me a like thank you if you want to know how to create your own cookie cutter watch this…

Starwars BB8

Design is from Daniel Lilygreen (https://www.myminifactory.com/object/3d-print-star-wars-the-force-awakens-3832) based on it i scaled it to 15% (about 12 cm ball size) and sliced it for 0.4 and 0.6 nozzle size, have fun!

Princess Lea & BB8 Star Wars

Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1U-ish

Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…

VW Volkswagen Passat B8 phone tray with rotated USB port

I created this VW Passat B8 phone tray because my iPhone 8 with cover didn't fit into the standard one. Rotating the USB port by 90° it has space for phones with a length of up to about 15 cm which is about 11mm more than the standard…

BB8 - Star Wars RC Droid

This is an easy to build Disney Star Wars BB8 inspired robot. It's controlled by an Arduino UNO over a bluetooth connection from your smartphone. Part one in our series covers the majority of the electrical assembly, and the creation of…

B8-Lab Spinning Top Pull-Cord launcher Pull-String toy game games

I combined 3 projects to create the ultimate spinning top! You will find various versions of spinning tops, print the one you prefer! There is also a version that mounts a bearing inside to make it weigh more and with a steel ball on the…

Front and Back Cover for Angry CAM USB v2 with IMX179 USB8MP05AF Module

Modified versions of the front and back covers of chri.kai.in's Angry CAM USB v2 for use with the IMX179 USB8MP05AF camera module.

Arris Comcast Xfinity XB8 Wall Mount

For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount

Low Poly 2019 Volkswagen Passat B8 sedan

This is a Converted model from SketchFab, it is a 2019 Volkswagen Passat B8, I hope you enjoy the model. Link to original model: https://sketchfab.com/3d-models/low-poly-volkswagen-passat-b8-de203c04b4da40c8beb9a460ffe3eb7e Happy printing!

Passat B8 Magnetic Car Holder adapter for the central console

I designed this thing so I can mount the magnetic carholder lower down the central console. This keeps it away from my view but still easily accessible. My USB charging ports are also in the ash tray area, so the cable does not have to…

audi a4 b8 avant 2009 optical illusion

I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!

Arris Surfboard SB8200 Rack Mount

Arris Surfboard SB8200 Rack Mount Enclosure I wanted to rack mount my SB8200 but in doing so and placing it between 2 pieces of equipment it would overheat as it is passively cooled. So I set out to design an actively cooled rack mount…

bb8 puzzle

BB8 figura de star wars para armar

Audi A4 (B8)

please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script and use a prime pillar Category: Keychains

F1 Red Bull Racing RB8 2012 Wall Art

F1 Red Bull Racing RB8 2012 Wall Art Silhouette model. Adjustable size. I acept model suggestions.

AUDI A4 b8/b9 rear speaker adapter

I made it too hard. you're better to do it to I am not sure yet about b9 but on crutchfield the four door speaker of b9 are really Similar

Audi A4 B8 Schlüsselanhänger Keychain

Schlüsselanhänger ist mit Materialwechsel zu drucken. Keycheain is to be printed with material changes. Schichtdicke 0,10mm / Layer 0.10mm Infill 15 % color change at 1,10

Star Wars BB8 Headphones Stand

Star Wars BB8 headphones stand Prints in two parts and slots together Backplate is thin so it looks good backlit @3DPrintBunny

flying propeller pull copter B8-Lab

A fun propeller launcher! I remixed two already quite good and functional objects to create an even better and more functional object! I recommend printing everything in PETG for greater flexibility and component strength. The rope and…

Audi A4 / S4 (B8 / B8.5) Vent Gauge Pod 52mm

Vent gauge pod for Audi A4 / S4 (B8 / B8.5) for 52mm gauges. Install location is the left center vent.

BB8 coasters

this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…

AUDI A4 B8 Car Outline \ WallArt

AUDI A4 B8 Car silhouette model on a stand! It's perfect as a desk decoration. The model includes a set consisting of a car silhouette and a stand. The car silhouette and stand are also available separately in the print profile.…

BB8 Stand

If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- I made this stand to put the BB8 I downloaded from here If…

Audi A4 B8 rear seats cupholder

When the car isn't born with cupholders in the rear seat armrest and your passangers want to enjoy a cold drink an not hold it all the time, a cupholder is the obvious fix for that. I couldn't find anything on the itnernet that would fit…

3" dash speaker adapters - fits Audi B8

This is a speaker adapter ring that fits the dash speakers in Audi B8 models, such as A5, A4, Q5 and so on. These are designed around the Dayton Audio RS75 3" speakers. The side rings also includes a holder for the original resistors.

Audi A4/S4/RS4 B8 Dash Speaker Adapters (side & centre) - Modified

Modified from the original: Slots to allow for the terminals to pass through easier. M3 recessed nut cutouts for mounting the speaker driver. Category: Automotive

Arris Surfboard SB8200 Mount

Will fit most Arris Surfboard Models (8200, 6141, etc). Complete re-design to fit the SB8200, re-measured, redesigned, and printed at least 10 different versions to ensure a nice fit on my own SB8200. Hopefully this fits better than…

XB8E 2024! Receiverbox

UPDATE 27th oct. '24 Toms Puķītis asked me to make a version without the TP-mounting. UPDATE 13th Oct '24: (v3.9) slightly higher box, three mm more height on the inside. UPDATE: aug, 27th '24 After testing, multiple updates, many…

SlimDigi by LB8IJ - Digital interface for Yaesu FT-891, FT-817, FT-818, FT-857, FT-897

Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…

Arris Surfboard SB8200 Wall / under desk mount

Simply and fast printing wall / under mount for your Arris Surfboard SB8200 modem

B8-Lab Futuristic Spinning Top Pull-Cord launcher Pull-String toy game games

Spinning top compatible with B8-Lab launchers, No support required! Check out the other spinning tops on my page :)

Audi A4 B8 front door speaker adaptor 165mm

i print with 15% infill and 4 wall/top/bottom with abs. Its more than enough. The flat face is for fixing a cross over And I suggest you to measure the hole and probable make new one if your crossover fit I made it offset so it’s align…

VW Passat B8 Phone Holder

Dual phone holder for the werid (coin?) tray behind the auto-hold and handbrake in a Passat B8. Phones lie down at an angle with ports sticking out where you can easily plug in cables. Has slightly different width slots which were sized…

Passat B8 Variant boot cover side guide

Recommend using PETG for better thermal resistance and flexibility. Support are needed: Left side is not remixed. You can take inspiration from the right and remix it. Thank you :-).

IO shield for Asrock B85m Pro 4

I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…

Xray XB8E Receiver Box Remix

Edited & removed second screw to have more empty space. Now fits Sanwa RX482 better. MyLaps Transponder fits as well. Includes soft cable glands too (Must print with soft TPU)

RC 1/8th Xray XB8E shorty battery tray

I wanted to have a bit more space to mount electronics in my Xray XB8E 2022 buggy. I designed this battery tray which can be mounted with longer M4 bolts. The battery of “shorty”-size is held tight in place in a centre position, so not to…

Tankdeckel Schnur Audi A4 B8

Muss aus FLEX Material gedruckt werden. Zum installieren müssen die zwei kleinen Plastikbolzen aus dem Tank-Schraubdeckel heraus gedrückt werden. (nach Möglichkeit nicht verlieren :-) ) Danach die neue Schnur hinein schieben und die…

VW Logo for ashtray/cigarette lighter charger (VW Passat B6/ B7/ B8/ ARTEON/ CC/ R36)

use 100% infill and add the pause macro at the right layer. I used a 0.25mm nozzle with 0.1mm layer height this is the charger I got from aliexpress for my passat b8, but they say they have models for Passat B6/ B7/ B8/ ARTEON/ CC/ R36.…

Sram DB8 brake pad spacer (20mm Large)

Hi, I modified ' Piketooth ' pad spacer model to fit Large 20mm SRAM brake pads. I only tested it with my SRAM DB8 model and it fits great (in my opinion more handy than stock black spacer that came with the brake). I think it will also…

Dash clip for Passat B8

Print with a brim since it is a tiny print, and it is good to add more clips to the print job. I've printed them in PETG, and they have held up really well. Very happy with the result. It should also work for other car models/brands, I…

EBB36 DB8 WristWatch-G2 Mount

EBB36 Mounts for my Dragon Burner 8 with WristWatch G2 Extruder

funko pop bb8

funko pop bb8

A4Tech Bloody B820R Wired Keyboard Foot

The first layer is 0.15 The remaining layers are 0.08 Width 0.4 3 perimeters Filling in 100%

RC 1/8th Xray XB8 and XB8E mud-wing

IMHO best to print these (you need two) out of PETG as this is less brittle then PLA

B8-Lab simple Spinning Top Pull-Cord launcher Pull-String toy game games

Spinning top compatible with B8-Lab launchers, No support required! Check out the other spinning tops on my page :)

Star Wars BB8 Christmas Tree Ornament

Now I don't know about you, but I think BB8 is pretty cool. So, I decided to make a BB8 ornament wearing a Santa hat. I did not paint mine however, it could absolutely be painted and would look really nice painted. I thought it would be a…

RedBull RB8

I removed the bottom plate, thats all. :)

Passat b8 Smartphone holder

Holder to mount an iPhone magsafe charger to the VW Passat b8.

Servo motor - Ministudio RB850b

model based on ministerio servo: http://www.ministudio.co.jp/cgi-bin/order-jp/DetailJp.asp?GoodsNum=273 Dimensions: W24xH18xD10

IO Shield for Gigabyte B85M-D3H-A

Fits this and probably similar motherboards

Yagi Antennas - By Ham Radio Passion (LB8IJ)

This are the mounting brackets needed to make Ham Radio Passion (LB8IJ) Yagi antennas. These are lightweight portable antennas made out of 10mm square aluminum tube as boom and 6mm aluminum pipe as elements. The following video shows how…

Gum can holder for Passat B8

I have printed it in ASA Prusament on the SATIN sheet. PETG is probably also suitable. 0,4mm nozzle 0,2mm quality settings Glued together with super glue (CA glue) after printing.

Centaurus B80 Vape Drip Tip

I printed it from resin but PETG will work too. Use seals from orginal one and use supports. Happy Printing!

Audi A4 2.0 B8K (2008) TDI P2015 Trouble Code remove

This thing removes the P2015 error and engine error. I printed this in ABS with 99% Infill. Category: Automotive

BB86 Bottom Bracket Press

Cups for BB86 BB install. Includes 41, 30, 29, 28, and 24mm cups, as well as a parametric design that can be altered for other sizes. Cups are labeled for their bearing size (ie the 24 mm cup works with GXP bearings, though measures 23mm…

Sunglasses Tray splitter for Passat B8

This splitter allows you to divide the sunglasses tray on the VW Passat B8 in half to get two pair of sunglasses in.

BB8 Stand by Designer Paulorfo

BB8 Stand designed by Paulorfo; downloaded from Cults3d.com. https://cults3d.com/en/users/paulorfo. Can be painted to match BB models made. Very easy print. Thanks to the designer for the free print and easy answer to keep the droid from…

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…

XRAY XB8e clipy

Prostě klipy na vymezení vůle na upperplatu. tisknu z PETG

BB8 2D art

Who doesn't like BB8? This is a 2D picture, each color printed at different layer height. Didn't print it yet, only have orange PETG, rest of the colors I have in pla.

passat b8 armrest storage adapter

It started when i needed a place to put my phone in the car when linked to carplay. looked for something on the internet but what i found didnt fit well in that space so i ended up making a holder to fit in there flush and painted it in…

Audi A4 B8 rear tweeter adapter

Its already been a couple month I install it, if my memory is good, it was really tight. its the only pic a have, its clip from behind

Fanttik NEX b8 ace wall mount

Upgrade your workspace or garage setup with the Fanttik NEX B8 Ace Wall Mount , a durable and sleek storage solution designed to perfectly hold your Fanttik NEX B8 Ace Duster. This wall mount ensures both stability and convenience,…

Helix Conductor Audi A4 B8 Cup Holder Bracket

The model prints with support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.

Fanttik B8 Ace Air Duster Case

I'm sure so many out there have already printed the rugged box, or some remix of it. This one no different really, just sized it up for this and thought I'd share. Simple case to store the Fanttik B8 Ace as it does not include a storage…

Pioneer / Toyota Audio Unit Knob 90010-22031 or 9001022031 or CXB8282

As there discontinued I was lucky enough to get my hands on the last one available. Toyota Part Number: 90010-22031 or 9001022031 | S/S 9001022030 or 90010-22030 Pioner Part Number: CXB8282 (HL15)

replacement lever for broken lever of tefal masterchef grande beater QB813D38

printed at 100% fill + 0,1mm layer, 0,4mm extruder, PETG, print wiht base supports, works well

Renault B80 B90 B110 B120

Voici des insignes de portières à coller pour les camionnettes Renault B80 B90 B110 et B120 réalisées en m'inspirant des photos et d'une insigne d'origine

Remote control BB8 holder

We recently went to Disney world and bought a remote control BB8 from the Droid Depot. The Version we bought did not com

Audi A4 B8 engine cover emblem

Model of the Audi emblem for the engine cover of the Audi A4 B8 (TDI version). Print using a temperature-resistant material such as PETG or ABS. For mounting, use double-sided tape or heat-resistant adhesive. Model dimensions: 163 x 56.24…

bb8 coasters v2

this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…

RC 1/8th setup-clips (Xray XB8)

Clips that fit 4mm axles, used in an 1/8th offroad buggy ... but other will too. The clip provided has a thickness of 2 mm but can easely be scaled down or up by altering the Z-value in the used slicer. I use these in my Xray XB8E I…

3D Printed Speaker Enclosure for Visaton B80 Chassis

3D Printed Speaker Enclosure for Visaton B80 Chassis based on the "Klang und Ton" “Björn” Concept. I saw the building instructions for this initially in the magazine “Klang und Ton 2012/1” and adapted their concept to 3d printing. I…

AMB82-Mini Streaming WiFi Cam Printer Camera

The Realtek AMB82-Mini outclasses the typical ESP32 boards used for printercams, with a better camera and faster CPU, more reliable software and a more powerful and featureful board overall. After I added a printer riser with plenty of…

Comcast/Xfinity XB8 wall mount

This is for the Xfinity xb8 modem to allow it to be mounted to the wall instead of sitting on a desk or on the floor. Be sure to use support tree!

Mud Guards XRAY XB8E 2017

Printing height 0.2 mm with nozzle 0.4 mm

Motorola MB8611 Wall Mount

Simple wall mount shelf for a Motorola MB8611 cable modem. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: any PLA any Category: Organization

Spinning Top Launcher for Series B8-Lab

Spinning Top Launcher for Series B8-Lab all compatible tops are on my page: https://www.printables.com/@andreabiancot_241404

PCB800869 - Scheda display EDP 30PIN

Scatolina per la scheda PCB800869 EDP 30Pin PCB800869 EDP 30Pin Board Enclosure Category: Other

Ventilation slider for Passat B8

Wishbone for repairing broken rear ventilation slider after hitting the slider with something. The wishbone usually breaks or disappears inside the ventilation tube. The slider is somewhere on the floor, just try to find it. You need to…

XRAY XB8e Upperplate

Náhradní upperplate pro XB8E. tisk z PC výplň tak 40%

Arris SurfBoard SB8200 1U RackMount

This is designed/remixed to specifically hold the Arris Surfboard SB8200 Cable Modem and adjusted the pieces to reduce the flexing seen in other prints for this modem. Specifically, the tolerance causing the face of the mount to push…

BB8 from starwars

Small decorative BB8 with a base so it can stand. Made with Onshape

KUBOTA LOBOY DIESEL GENERATOR and B8200 Tractor FUEL FILTER WRENCH

This tool is a perfectly snug fit to safely remove fuel filter on a Kubota Loboy Diesel Generator and B8200 Tractor without damaging it. 3D PRINTING SETTINGS 0.15 100% Infill PETG

Unifi Lite 8, USG, and SB8163 19cm network rack mounts

They should all fit in with friction. The SB8163 gets hot so give it plenty of room and air flow. For the Unifi Lite, use a zip tie. It works ok.