Liczymy pasujące modele…
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…
I remixed wonderfull holder made by mkingery by adding 15mm offset from the pegboard. That allowed to mount Baseus GamerX 6 Ports USB-C Steam Deck Docking Station behind the Steam Deck. With some cable mounts now I can easily rest Deck on…
For users who got the Baseus I-Wok Pro computer monitor light, and webcam, this mount could be the best option. This mount can put the webcam directly on top the light bar. The USB cable of the light bar can be arranged under the mount.…
This wall mount was entirely made with Prusa Slicer. It points downward to enable to set the the solar screen at a more appropriate angel compared to using the mount that comes with the camera. When using this angled mount, the camera can…
Simple stand for Samsung S23 with wirelles charger (Baseus Simple 15W BSWX-P10C). Fits for all wireless charger with 93mm diameter. Printed with PETG,PLA.....No support.
Keep your car emergency gear protected and organized! This is a custom-designed, heavy-duty storage case specifically engineered for the Baseus Car Jump Starter . If you're tired of the original soft bag or just want a more rugged…
This is a sleeved mount remixed for the Baseus 65W GaN Charger The mount is designed to pass the wall plug wire through the side of the mount. The positive stop on the front prevents the charger from pulling out of the mount when…
When you buy a Baseus charger, all you get is a cardboard box and a thin extrusion inside. I thought I would like to have some sort of convenient box, so I made a box with a sliding closure. Supports In the case of my printer (Prusa MK4),…
I needed to mount the hub below monitor, but above monitor stand. You can print one front and one back holder part or two back (standing) parts if you do not need to attach it to the shelf edge. If you need to modify this project it is…
I designed this dock for pixel 7 but it works great with iphone 15 pro that i tested. Hope you like it:) You can buy me a coffe if you want :) https://www.buymeacoffee.com/m12ukraineh
I converted the light bar to be wirelessly controlled, so I designed a end cap to replace the capacitive touch control panel.
Support brackets for mounting the Baseus Desktop Charger under the desk. One of the two brackets has no locks and allows for mounting. You need to slide the charger into these brackets after screwing them to the desk.
This is my own 2x1 Gridfinity bin to hold my 20.000mAh Baseus (65W PD version) powerbank in a vertical position. Printed with PLA on A1 Mini.
I used PLA, infill 10-15%. I printed it with my FLSUN SR, I didn't need supports or plate adhesion help. Feel free to make other versions of it ;)
You can print it with the text facing upwards for better quality (use brim if u have poor bed adhesion) or flat on its belly if u don't care about the text quality. I recommend taping it down with double sided tape . Happy printing !!
Description Desk or table mount for Baseus 100W/65W charger. The mount consists of: Charger mount Desk mount TPU pad to prevent slipping Screw pad to protect the desk Two screws, with a 5.2mm insert Screw caps Screw pads from the bottom,…
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
Please comment, rate, and post a make! Be sure to check out my other models! This is a sleeved mount for the Baseus 100W PD GaN3 Fast Wall Charger Block . The mount is designed to pass the wall plug through the back. The positive stop on…
I bought this power bank and i thought it will be all in scratches when i will throw it into my backpack, so yeah i made a case for it. You need to put some tape around the power bank and then slide it into the enclosure. My guess is…
I've designed a wall mount for the Baseus a3 lite vacuum cleaner. The mount can be easily attached to the wall using two screws. At the bottom, there's a hole that allows for a charging cable or can be used to secure the vacuum cleaner…
DeckMate attachment for the Baseus 7-in-1 USB C hub. https://www.amazon.com/dp/B0C85759QD You will need the Deck_Mate_Mechanism_Top__Print_02.stl from DeckMate, along with springs .…
This is a holder for the Baseus 65w 20Ah Powerbank on the IKEA Skadis pegboard. This holder has extra large cutouts, so the Powerbank could be inserted in both directions and the Cables and the Button are useable.
This simple and practical wall mount is designed specifically for the Baseus A1 vacuum cleaner. It allows you to store your vacuum cleaner while keeping it easily accessible and securely. Material: tested with PETG, but it should also…
Similar to my previous design I uploaded, but this one has a cutout for a TEMT6000 Ambient Light Sensor.
Mit PETG gedruckt. Die Bügel mit M3 Schrauben an die Halterung schrauben.
Simples Baseus 100W power supply holder to be fixed in flat surfaces with double-sided tape or with screws. Height: 0.2mm Supports: No.
The specific model is this one: https://baseusonline.com/product/79/baseus-circular-plastic-a-c-30w-pps-car-charger-black#item_358 Diameter is 2.5cm. Will likely work on the other 30W one that is dual USB A (which is why I didn't put in…
Protective Case for the Euro Plug of Baseus Ultra Slim GaN Charger Model: CCGAN6555-OE This 3D-printed case is designed to protect the euro plug of the Baseus Ultra Slim GaN charger. If you often carry your charger in a backpack or bag,…
Just grab the legs on the back to adjust the angle. Tested on Bambu Lab P1S, Generic PETG, 0.4mm nozzle, 0.2mm height, 3 walls. Probably will print just fine with any settings. Designed to be used with baseus magnetic usb c adapter, you…
I bought this battery for my film equipment, and it's amazing. It is capable of multiple voltage outputs simultaniuosly. It can power my wireless mic reciever (5v), my camera, (7.5v) and my external monitor (12v) all at the same time.…
This is for the Baseus charger model with an EU-type electrical socket. I’ve modified the original design by adjusting the dimensions and cutting the front section to ensure easier access to the socket. Needs support. You can get the…
I broke the latches on the container that holds the dust bag. I have modeled a replacement for the original part.
The Baseus 20W Dual Wireless Charger Holder is a charging device designed to charge two devices simultaneously
Hi. I've designed a corner cover for Baseus powerbank. Bottom and top of the case are opened for better heat distribution and access to ports. Sides fully closed. There is also an opening for a function button. THIS DESIGN COVERS CORNERS…
Baseus 65W charger holder for sticking to the wall, radiator, or any other place. You can easily remove the charger and take it with you on a trip, and after returning, put it back in the holder and enjoy the tidiness. Uchwyt ładowarki…
I remixed wonderfull holder made by mkingery by adding 15mm offset from the pegboard. That allowed to mount Baseus GamerX 6 Ports USB-C Steam Deck Docking Station behind the Steam Deck. With some cable mounts now I can easily rest Deck on…
I created this model based on hub usb c mount by @trucologie_69422 with only a screw 4.0 x 35 in my MDF desk. I use only one support. Printed in PLA in an Ender 3 V3 SE. Default settings (0.2mm Layer Heigth)
Easy-to-print Baseus Simple Wireless Charger mount meant for epic Honeycomb storage wall . I designed this accessory for Baseus Simple Wireless Charger (Updated Version) (exact model: BSWC-P10C ), but it should work for any round wireless…
The model is designed to fit the Baseus Adaman 2 power bank, but feel free to remix it! Anyone is welcome to edit or tweak the design to fit their own power bank model or improve some of the rough spots.
Easily attaches to the pump body with double-sided tape, securely holding the attachments in place. Keeps accessories handy and perfectly complements the original design of the Baseus SuperMini Pro.
Модернизировал модель, под размеры 100 ватной версии
A holder for the Baseus A2 Vacuum, which is a small and handy vacuum, to such up those small 3d printing debri. Base section has 2 mounting holdes. Top hole was made for an angular screwdriver, but I have provided a file for a regular…
A stand that perfectly fits the size of the lamp. You can either screw it on the sides with screws or stick it on with double-sided tape. Thanks to the high base, it holds the lamp perfectly and prevents it from being knocked over by an…
Wall mount for Baseus charger https://aliexpress.ru/item/1005002615774948.html Настенное крепление для зарядки от Baseus. Вторая модель - крепления кабеля на стену. Кабель вставляется в центральную прорезь, потом поворачивается на 90%.…
Printed: Prusament ASA Orange Prusa presets for ASA 10% infill Use Supports
Not much to add. Print with high infill. I use PETG.
Simple holder that holds front part of “Baseus 65W GaN Charger Power Strip Desktop Adapter Fast Charging Station 4000W AC Outlet For Laptop Tablet iPhone Xiaomi Samsung” in-between couch and wall with a wedge. Added little shade to block…
For users who got the Baseus I-Wok Pro computer monitor light, and webcam, this mount could be the best option. This mount can put the webcam directly on top the light bar. The USB cable of the light bar can be arranged under the mount.…
0.20mm layer height more infill equals more stability (min 20% infill recommended)
Under the table holder for "Baseus 67W GaN Charger With Dual Retractable Cable", to keep your table clean. The charger can be purchased on AliExpress here: https://s.click.aliexpress.com/e/_c3XfBVs5 2 pin extension can be built using…
Funda protectora rígida diseñada a medida para la Baseus Blade HD (100W) . A diferencia de otras fundas, este diseño se centra en la comodidad de uso y facilidad de montaje. No necesitas tornillos, pegamento ni herramientas.…
This wall mount was entirely made with Prusa Slicer. It points downward to enable to set the the solar screen at a more appropriate angel compared to using the mount that comes with the camera. When using this angled mount, the camera can…
Simple stand for Samsung S23 with wirelles charger (Baseus Simple 15W BSWX-P10C). Fits for all wireless charger with 93mm diameter. Printed with PETG,PLA.....No support.
Baseus Qi2 MagSafe Car Mount – 1/4"-20 Snap-Fit Holder Simple and solid snap-fit holder for the Baseus Qi2 / MagSafe charger (60.5mm × 11mm) . Designed to mount to standard 1/4"-20 arms (Ulanzi, SmallRig, suction mounts, etc.) using a…
Keep your car emergency gear protected and organized! This is a custom-designed, heavy-duty storage case specifically engineered for the Baseus Car Jump Starter . If you're tired of the original soft bag or just want a more rugged…
Baseus i-wok Youth DGIWK-B01 This cover reduce light angle from 90 to 30 degrees. I have two lamps, so this model combines two lamps into one. A single-lamp model is also available. Printed parts connecting with each other using standart…
Simple Stand for Baseus Simple Mini4 Air Magnetic Charger This is a custom stand designed specifically for the Baseus Simple Mini4 Air. Important Note: I highly recommend printing this with heat-resistant filament (such as PETG, ASA, or…
This is a sleeved mount remixed for the Baseus 65W GaN Charger The mount is designed to pass the wall plug wire through the side of the mount. The positive stop on the front prevents the charger from pulling out of the mount when…
Holder for a Pixel 3 with case to line up the wireless charger element with the Baseus charger. Baseus Charger: http://s.click.aliexpress.com/e/eNnlXkJO Rev-B: Narrowed the outer walls to 2mm from 2.5mm Increased length slightly to give a…
I decided to make a case for my 20W Baseus charging brick to customize the color, protect it from scratches, and damage. Walls: 3 Infill: 15% Material: PETG
The mount provides a clean, factory-like installation without the need for permanent modifications to the dashboard. It securely holds the phone while maintaining easy access to the screen and charging functions of the Baseus magnetic…
video: https://youtu.be/bqL0IYLaP-Q Additional materials: 1 inch nylon strap 70cm 2 pieces of velcro 5cm each sawing method Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20…
I bought this compressor for my motorcycle, but it travels with the packages. So the other tings can press the power button and discharge the batteries. So I made this. You can fix it with a rubber, or put the whole thing in a textil bag,…
Holder for a car trash (from Baseus), that can be mounted e.g. on the side storage of the car. The first design (large) was meant to be printed in PLA or TPU, but it appeared to be too long, and the trash was crashing while closing the…
You might want to cut the head of the pipe. Apparently i miss measured something and it did not fit as I imagened. Added couple of metal weight at the bottom openings and glue the covers. Buy me a beer PayPal.Me/cagataykilinc Category:…
Baseus Wireless Airpods Case Keychain Clip. I am not a pro at 3D designing but it fit perfectly. I design it in sketchup and added the .skp file so feel free to remix it. Buy me a beer PayPal.Me/cagataykilinc Print Settings Printer Brand:…
Replacement cover for ec5 jump-starter plug on baseus jump starter. printed in hard TPU
I created a protective and carrying case for the Baseus 65W / 20000 model power bank Be careful to use it at high temperatures, since the power bank has a dissipating metal body it can heat up a lot in summer when it recharges quickly.…
Mount with screwholes for Baseus GaN3 Pro 4 Ports Desktop Charger 100W. I needed a simple sleeve mount so I can put the Baseus charger under my desk, where I can still easily get it out and take it with me. There's 2 versions, one which…
Hello, everyone! I'm a maker that has recently gotten into guitars. I purchased the Positive Grid Spark amp for my guitar in December and joined the Positive Grid Spark Communities online. One of the more popular “mods” to the amp is to…
This is a simple mounting adapter designed to mount a Baseus 65W Battery to the dbrand Steam Deck Killswitch case. The battery is fitted to the mount using a simple friction fit and the mount attaches to the Killswitch using dbrand's…
A cupholder mount for the Nissan Qashqai and Baseus Qi charger. The included adhesive base will not stick to almost any material in the car cabin, as they are mostly oddly shaped, foamy faux leather type of a deal. This mount out of the…
I have a thin Baseus 100W Power Bank that I want to mount into my bike's cargo basket. But it's a bit awkwardly shaped for mounting. Plus, I want to have a bit of rain protection, and hiding this expensive-looking bit of tech inside a…
Baseus usb-c Port Gap Spacer Print instructions Flexfill 98A Infill 20% Speed 40%
I needed to place a Baseus soap dispenser somewhere, so I made this holder I drawed it on Onshape and printed it on my new MK3S
Baseus 65W GaN Charger mount https://s.click.aliexpress.com/e/_DDM7u8V
Remixed model from GunbleR to use with non-flexible filament.
Upgrade your Baseus 65W Charger with this practical mod that adds a long cable, allowing you to conveniently charge your devices from a distance. Originally, the charger broke due to a weak point in that area, so I decided to repair it…
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
This is an accessory for the Asus ROG Ally that allows you to clip a Baseus 65W battery bank to the back of the console. Link to the battery bank: https://amzn.to/3JrHDR2 Note, this is an affiliate link so I make a kickback if you…
I wanted to have my Cordless Vacuum Cleaner handy around my printer, I didn’t find something ready that will work for my needs, so I used Tinkercad to get something done. Ikea Bror mountable Wall mountable Can be used as disk stand also…
Simple stand that slides on to the Baseus 65w battery leveraging the weight of the battery to keep the stand in place. Helps reduce device and cord clutter while taking up minimal tabletop space making this ideal for an airplane or other…
A remix from the original to fit the Baseus 20k 65w ‘Elf’, PPJL65C, so the powerbank with attached cable. This is considered a good option for the Steam Deck! The fit is good, does not fall of, like the original poster. I like it very…
Gridfinity 4x2 holder for Baseus 100W USB-C Charger (EURO plug) This model of charger has a EURO plug and a EURO socket at the top.…
I had a wireless charger for my phone in the office. I didn't like having to leave my phone flat on the desk to charge, because I wanted to be able to leave it charging while seeing the screen. So I drew up the charger base around it.…
Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
Baseus 65W/100W mount on IKEA LACK furniture, will need to use supports
Modified the mount to support mounting of Baseus branded Magsafe charger, as the default mount is too small to fit.
