28 modeli
This enclosure is divided into multiple parts viz., Top, bottom, and buttons. The top and bottom half are held together with friction. No screws are required. NOTE: Please make sure to remove the SD Card before opening the case, or else…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
I needed a simple base to mount my BeagleBone Black. Not a full case, just enough to protect the bottom components when putting it on a desk. I first tried this model , but I wanted stronger screw posts, and the base nicely matches the…
Warning!!!! It is very important to be careful assembling this case. Since it is really slim you can find yourself in trouble fitting the BBB inside the case. My recommendation is to insert first the usb side and after the HDMI side,…
A little tray/case for BeagleBone AI64. Uses 3M Screws to hold it but can just be used snap-fit to the board too.
This is a holder for the Beaglebone White, Black, or Green. Only tested with Beaglebone White, but I am quite certain the physical format is the same. I printed this in PETG in case it sees high-ish temperatures, but PLA would probably be…
This thing contains a mounting plate and a drilling guide for the “Beaglebone Black”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate is 2 mm thick. M2 5 mm or 1/4″ 4-40 screws…
I really like the DIN rail mount designs by imstrng and used them for my Raspberry Pis and disks but was in need of a DIN rail mount for the BeagleBone Black. Therefore I took the default DIN rail mount design by imstrng, loaded it into…
A stand that I made for my Beaglebone AI-64. I figured the board gets to hot for a case therefore I went with a stand
Make sure to add the pause in your Slicer of choice on layer 12 before printing so you can insert magnets!!!! These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets. The 3MF files have…
This is version 1, the Beaglebone AI doesn't come with a holder so I created this one. I printed with PETG. The cover for this reminds me of Star Wars Millennium Falcon. https://beagleboard.org/AI
This is a case for the Beagle Bone Blue. I felt the original case was nice but needed a couple of upgrades. To that end I added a spot to mount extra circuit boards like the boost converter and the adafruit ultimate GPS as seen in the…
Commissioned work for the Karlsruhe University of Music (HfM). All screw holes are designed for M3x5,7 threaded inserts (I used CNCKitchen's inserts). Printed using Prusament PETG.
A complete case for the Beaglebone Black and a BB-View LCD 4.3 cape. Beaglebone Black board http://beagleboard.org/black BB-View 4.3 LCD cape https://www.waveshare.com/lcd-cape-4.3inch.htm
case for BeagleBone black and DLP2000
Summary: This stand is perfect for working with the OpenROV BeagleBone and OpenROV Cape. It is suitable for sitting on your desk, or for mounting to a wall. I've included the Google Sketchup files for both Versions 1 & 2 as well as the…
About This is a mounting bracket for the BeagleBone Black & compatible boards. Combined with the SSR DIN rail mount , it can be used to securely attach the board to a standard DIN rail. The mounting holes for the BeagleBone are designed…
Remix of @tkramm's Rack Mount Adapter to fit a BeagleBone Black board. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 mm Infill: 20% Filament: DasFilament PETG Black…
Laser cut on 2mm or 3mm acrylic. Install a small 5V fan and connect to onboard power rails. Use standoffs for heights.
This is a mount to attach and hold in place a Beaglebone and a half size breadboard and mount it to a Prallax Boebot aluminum robot chassis. This mount can also be used standalone to hold your Beaglebone and a breadboard in place for…
I use a BeagleBone Black to run Octoprint with my Prusa Mini and wanted to reduce clutter and the amount of loose wiring. Mounting it on the bottom surface of my desk was a simple solution. One of the brackets has a cut-out to in order…
The size doesn't seem right, so...
A hardware mount for the beaglebone black/CRAMPS 3d printer interface. Two part solution including standoffs, strain relief, and active cooling mount for 20 mm fan. Mounting holes for M5 screws onto 2020 extrusions. Instructions Print top…
These are mounting brackets for a BeagleBone Black (BBB) and two 40mm fans. They are designed to be mounted horizontally inside a delta printer bottom triangle underneath the build bed, but surely possible to use other mounting…
10" rack mount shelf for 3 BeagleBone Black SBCs
Hold a BeagleBone board in a standing arrangement on a DIN rail
Aptly named fan mount :) Uses a regular 50mm cooling fan. Category: Electronics
This is T-Slot mount for beaglebone, designed specifically for a replicape controller board, but would work for many other beaglebone mounting applications. It is similar to the other versions listed as sources, but I changed it to have…
I didn't bother posting the first iteration because it wasn't fitting any cape on. Also mini usb port was blocked so really remodeled it before uploading. Should fit most capes just be weary of cables sticking out. Make sure to push in…
