Liczymy pasujące modele…
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
3D Printed minimalist bedside lamp with Ikea with smart bulb
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
Simple, does the trick. Needed a spot to put my kindle next to my bad. Designed this, used double-sided 3M tape to stick to the side of my bedside table. PLA is fine, 15% infill, 4 perimeters. Used fuzzy skin, looks good.
This is an M28X2 nut for a Relaxdays bedside lamp.
There are people in this world that still read books. There are also people in this world who sleep. For the small fraction of people that do both, I have an amazing solution for you. The bedside caddy. It is mounted between the bed frame…
I made a remix of the post: https://www.printables.com/model/725026-malm-bedside-table-old-dimensions I had to adjust to the new dimensions and added a removable bin.
I need some extra room to charge my phone on my bedside table where my CPAP machine lives. Designed an enclosure for the machine with full access to Power button , rear hose, menu and Tank removal. I can now safely sit my phone on top of…
A neoclassical styled iPhone charger, inspired from neoclassical architecture in Paris. Feel free to provide feedback! Print Tips: Printed on a X1C Bambu Lab with 0.4 mm nozzle. Filament shown in picture is ELEGOO 1.75mm Marble PLA…
Here is a super bedside lamp Might be a nice present for the landlord of the local Biker pub As it is a lamp I tried just 2 wall loops with zero infill. As long as you have good bed adhesion 15% overhang using organic support should do…
here is a smaller girlie bedside light... she will perch on top of a 40mm diameter light fitting... (This means the hole in the base is only 40mm. so bear that in mind if you do not have a light bulb that will fit) I gave her 2 wall loops…
very satisfactory bedside lamp.... The shade fits nicely this time and I have shown in the photos the simple structure. I live in Europe and their standard thin 2 pin plug will pull through the stand with a bit of encouragement.If you…
I designed this shelf to keep my CPAP machine and alarm clock organized on my nightstand while minimizing clutter. The top shelf supports the CPAP machine, while the lower shelf provides a dedicated space for an alarm clock or other small…
This lamp might be appreciated by the kids.... counting sheep will help them sleep... If you do not like him as a lamp, you can keep him as a model, he will stand firmly on his feet. I made his hooves black, then changed the filament to…
A lamp I designed for a bedside table. It used a clipped E14 lightbulb socket with low wattage LED-Lighting. The top and bottom part can interlock with a simple turning mechanism. Added the STL files and gcode. The top is a big tricky to…
Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…
A neoclassical styled bedside shelf, inspired from neoclassical architecture in Paris. Overall Dimensions: Height (Vertical): 4.37 in Width (Side to Side): 11.25 in Depth (Front to Back): 4.00 in Print Tips: Printed on a X1C Bambu Lab…
Got and Ikea Vastmarke but found that my phone would fall to the front once attached because the center of mass is badly designed. So I removed all the cork (see picture), cleaned the remaining glue (see picture) and fitted it in this…
French (English translation follows) Voici une lampe de chevet d'environ 28 cm de haut et 23 cm de diamètre Je l'ai réalisée lors de ma récente formation Fusion 360 Cette excellente formation est proposée par Sylvan La Rochelle. Elle est…
Ultra-Strong Bedside Organizer with Integrated Glasses Dock Upgrade your nightstand setup with this functional, minimalist bedside shelf. This 3D-printable STL is designed for anyone who wants a dedicated spot for their phone and a safe…
2 Piece bedside lamp. I used colourless eSun petg for the lampshade and black eSun pla for the base. Layer height: 0.15mm but 0.2mm is probably fine Infill: 15% but this does not really matter Walls: 3 walls to ensure the lampshade is…
A simple and practical 3D-printed smartphone holder designed for comfortable hands-free viewing in bed. It fits between the mattress and the headboard, keeping your phone supported in landscape position while you watch videos, films or…
This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and…
This is the first version of a bedside shelf for IKEA MALM Beds. There a some minor design flaws, but print turned out quite well (except a problem with first layer) and fits perfectly. it is a quite stable design. if someone wants to…
Printed with organic supports (buildplate only) holding the “arms”. Widest part on build plate
This is a 3 parts bedside table lamp, with a low poly design. You can play with colors, filling percentage and filling profile to get different results on the transparency :) For the assembly : First insert a 1m flexible led tube, like…
There is never enough room on your bedside table for every function you need it to perform...... Light/ Lamp, book rest, phone space/charger, kindle space/charger, ear plugs, earrings, watch, charging cables etc. How do you then stick a…
MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…
Do you also have a pile of gadgets or other stuff next to your bed? This box attaches to your bedframe to give those a warm home accessible to you. Ideal for a tablet, headphones or charging your phone. The box is designed to fit a…
Este portavasos es ideal para tu escritorio o mesa de dormir o donde vos mas quieras, esta diseñado con diferentes medidas para que tu vaso se mantenga bien y no se desparrame nada y manche tu escritorio o tu mesa de dormir o donde lo…
I recently purchased two Ikea Nävlinge lights for bedside reading and loved their sleek design and ease of installation. However, the light was too intense for my taste, and it disturbed my wife while I was reading. The lamp emits 220…
Bedside table in 1:12 scale for doll houses. The fit in the drawer is kinda loose for commodity. Body is to print on its back with supports on the legs. Drawer is to print it on its bottom. 45 mm l x 30 mm w x 50 mm h
This is a new revision of my remote holder design. Changes include: Customized arms to fit the new slots Removed the screws and bottom part and instead opted for an "insert-through-side" design Can now hold two controllers Edges are more…
This is a V2 of the table grip I designed some months ago. Changes include: General change of shape Change in top texture Higher detailed patterns Original description: So if you're a cripple like me, you have an overbed table that just…
So if you're a cripple like me, you have an overbed table that just sometimes gets out of reach or needs to be pivoted left/right in just a specific way, but are unable to do it without getting up. That's where the table grip comes in.…
The hanger is 28.5mm wide if it doesn't fit your bed frame you can remix the model or let me know so that i can change it for you. The print orientation is on it's side with tree supports only touching the build plate. It can be seen in…
A Cute bedside shelf i made for my gf, can be used as a shelf for many small things like phone, brushes, markers etc
I printed in PETG and 10% infill since it does not has to face higher weights. Also i added a small cable passthrough. I made a V2 (also included) with less material used and basically same strentgh.
3D Printed minimalist bedside lamp with Ikea with smart bulb
An IKEA Koppla power strip 3-way socket holder for IKEA Malm Bed. It allows you to place your IKEA KOPPLA extension cord on the IKEA MALM bed without glue or screws. IKEA Malm Bed (Article number: 904.047.99 ) IKEA Koppla 3-way socket…
Welcome! Glad you're here! As for this model, I am glad to see you've clicked on it. Here are some information: Size: 160x90mm The inside dividers could be adapted to your liking This specific one was printed in vase mode and came out…
We love the little SONY SRS-XB100 bluetooth speaker, so I made this simple shelf to let it sit on the headboard of our IKEA bed. The thickness of the board is 34mm.
Landscape Bedside Phone Holder. Designed to allow the landscape view of the phone on the bedside Table. Without taking a huge amount of Fillament. Version 2 Includes Center Upright to allow Portrait Placement.
The clip design works for bedside of 22.4 mm of thickness. You will need: wooden scrap board (for the table top) 2x printed clip 2x 8 mm peg 4x screw with up to 3.5 mm diameter Drill two 8 mm holes to your board where the pegs will go.…
A charging station for a Samsung A34 (another cable from amazon), a Garmin Vivoactive 5 (Orginal cable) and the Galaxy Buds 2 (Orginal cable). Since I don't have a bedside lamp, I added an LED strip to the model. Since this configuration…
Stand comprises base, cover and plastic screws. What you need: 1x 25cm led strip with switch (aliexpress, action, …). Use standard splittable length, 10mm width. 1x power supply for the led strip (or recycle old USB phone power supply) 2x…
It's a simple bedside table. I use it for my phone, occasionally my coffee.
This model features a bedside lamp design made at the engineering school Unilasalle Amiens in 2024 by 2 first-year students Camilia Souaissia and Luc De Sousa.The lamp has been designed from 2 materials. the first is the black PLA plastic…
This was designed to solve the mess of multiple devices and charging cables on the bedside table, but could equally be used on the office desk. I used the Anker USB C Plug, 543 (65W II), PIQ 3.0 & GaN 4-Port Charger, which was purchased…
this is a simple model I whipped up for a friend, though id might as well share it here. should be glued with double sided tape or anything really. hope this helps!
Design for Ikea Sundvik bed. Slides onto the side rail to hold a water cup/bottle and extra small items. Requires supports.
Mini bedside storage box for your smartphone and other stuff. I added a hole on the floor to put your charging cable through, when not used you can put it in the small slid at the side to prevent it from sliding out. I included several…
As a replacement for a broken glass lamp shade. To blind the bulb, the through slots are not radial. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: No Filament: GEEETECH PLA white…
Print with natural supports (tree) enabled. Original F3D file provided to be adjusted to your requirement sin Autodesk Fusion.
A shelf I made to hold healthcare items such as deodorant, cologne, a facial and body lotions, but separated into their own sections.
This is a bedside lamp I made from an other lamp (see last picture). the base includes 3 AAA batterie box, a mount to install a buton and a batterie cover with a flat surface to stick your rgb on. I also included an empty base so you can…
Not an original design. I saw something that was way overpriced and thought i can recreate it with what I had on hand. This light is shaped like a house. Where you can rest your book face down to make a roof holding your page where you…
A simple bedside storage solution that hangs on the side of your bed. It holds: An AirUp Classic or any bottle/can up to 8 cm in diameter Your phone Extra storage for small items like (e-)cigarettes or anything you prefer I haven’t tested…
Simple, does the trick. Needed a spot to put my kindle next to my bad. Designed this, used double-sided 3M tape to stick to the side of my bedside table. PLA is fine, 15% infill, 4 perimeters. Used fuzzy skin, looks good.
This remix just replaces the backplate of the hotel-style bedside wall lamps with backplates with no unused holes. There's also a cutout in the top of the backplate, because I have no earthly idea how they could be assembled without it.…
This is an M28X2 nut for a Relaxdays bedside lamp.
Bedside lamp with indirect lighting. The case is completely printed apart from the wooden insert for the LED PCBs to keep the PLA from melting. Please do not try this without the wooden insert to put the PCBs on. It will melt! It also has…
Bedside Apple Watch charger stand. This fits the original charger with the USB-A connector at the end. I use mine with the 45mm series 9. It should work with the ultra as well but I don't have those to test out. There should be plenty of…
Designed specifically for LED ISO E14 lamps, very smooth and elegant design as seen in the images Made By Karem Abi Mosleh https://www.linkedin.com/in/karem-abi-mosleh-3021822a8/
Hello everyone, Here is a bedside lamp with a sleek and elegant design. This lamp works with an LED strip of at least 1 meter. Choose a flexible LED strip so it can easily follow the lamp’s shape. Also, select an LED strip with a high LED…
Created a bedside holster hanger for my Legacy Fire***s holster. Allows for easy access from my bed, while keeping the pew pointed in a safe direction, and secured in the holster. Recommend printing right-side up (i.e. how it will look…
Keep your phone safe and charged while at home at your desk or on your bedside. This easy print requireres no supports and prints in no time. The dock has a design that follows the curves of the MAG head. and he cable routes out from the…
I have created this model thinking that a seashell can be as well a good lampshade for a bedside lamp. Instead of PLA I've used a PVB filament because it's easier to postprocess. Just spray with isopropyl alcohol and let it dry. That is…
Dimensions: Length: 25.2cm, Width: 20cm Slot width: 2.82cm (suitable for bed rails with a width of 2.5cm) Features: Can hold items like smartphones, glasses, tissues, etc. Defects in the cover image have been removed. Structural supports…
I knocked my lamp off the night stand and broke the glass shade that it came with. This adapter allows the moon lamp shade to be used with the lamp. https://www.amazon.com/dp/B0C3C5VFR6 OnShape source:…
Reinforced bedside table made to fit on the edge frame of a bunk bed.
My IKEA Bedside Table always toppeled from side to side, as one of the legs was too short. I took the main dimensions from the included plastic standoff and increased its height to fit my needs.
Bedside LED lamp, chill lighting easy to print and make, need 1 20cm pvc pipe or you can just print a cylinder yourself and wrap the led strip around it, Yes i have printed it myself and even basic PLA doesn't melt due to heat from led…
Hi! I designed this bedside pocket. Check the file here: CR30 and H2D: https://a360.co/3GwnyL0 X1C: https://a360.co/3EQOEvF Printables did not recognize the idealmaker file but I added the zip files. There are different native files for:…
Simple Phone stand designed to be used bedside watching your favorite movie, series or other. Designed it to be used when lying in bed, but has proven to be a best friend when travelling. Fairly small, robust and light, it is easy to keep…
Water bottle holder, fits 1" bed slat. Designed for UCSB bunk beds
The lamp is relatively easy to print. An E27 socket from Max Hauri fits into the lamp base and can be ordered via the following channels.…
Great for : tissues, phone, remote, nasal spray, small book, keys, small trees and melons. Print parameters Printer : Prusa Mini+, FW 6.1 Material : PLA Nozzle : 0.4mm Layer-height/profile : 0.2 mm speed Supports : none Input shaper :…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
There are people in this world that still read books. There are also people in this world who sleep. For the small fraction of people that do both, I have an amazing solution for you. The bedside caddy. It is mounted between the bed frame…
I got tired of losing the remote in the bed. Designed and printed and problem solved. Simple solution to age old problem! Printed on end, no support needed. I did print with a brim, but it is optional. Useful in many situations.
This is a parametric phone holder designed for use next to your bed—whether in a home nightstand , RV wall , or anywhere you want convenient phone access while relaxing. Key Features: Parametric model : Easily adjust dimensions to fit…
A bedside organizer that fits neatly in your bedside space to keep all your remote controls easily accessible.
Bedroom organiser with space for: Two cans Glasses Keys Wallet Pictured: Printer: Prusa CORE One Layer height: 0.25mm Infill: 15% Lightning Filament: Prusament PLA Prusa Orange
I plan to use 4 each Small or Medium Command Strips made by 3M to affix this holder to the wall next to the corner bed, where the wall touches the bed and no space for a end table. I used PLA+ and I used Prusa slicer
Level up your dollhouse with this modern cube nightstand 🛏✨. The smooth pull-out drawer hides shoes, books or tiny treasures, while the raised legs add stylish realism 👠📚. Perfect for 1:6 scale bedrooms, diorama scenes or a fun desk…
Kann auf die Bettkante (22 mm) gesteckt werden und hält einen Müllbeutel. Attaches to your bed frame (22 mm) and holds a garbage bag.
This is a fun and practical Block Head–style bedside can holder designed to keep your drink within easy reach.
Illuminate your space with this modern lamp that blends art and function. Featuring a sleek, hourglass-inspired silhouette, this lamp turns heads even when it’s off. The soft, warm LED glow flows seamlessly through its elegant curves,…
This model is a ~60% Reproduction of the famous “Demon Core”, a Plutonium Core responsible for the deaths of Harry Daghlian and Louis Slotin in ill-advised, unsafe nuclear experiments. This model faithfully reproduces the spirit of the…
clip on the side of your bed may require supports depending on the printer
Three piece assembly. Concentric print for abs/pla parts. Clear or High Clear resin for top piece. (Required) part list: 5mm led x6 TP4056 (usb-c) charge module with protection x1 Li-po battery x1 M2 screw + heat insert x6 SF12F15 switch x1
I used 4 walls. 99% gyroid infill to make it very rigid. Print 2x and secure with zip ties. Made specifically for holding a long gun. Fits well on metal square tubing beds.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print the top part with extra walls to better hold the screw inserts (if using those) Used with the standard Apple Watch charger, and this Magsafe Charger: https://a.co/d/7u49soV M3 screws used to connect the top and bottom pieces.…
