146 modeli
Typical use case would be with a Extron Crosspoint or daisy-chain from the output of a PVM, TTL sync only. Connections are turned 90° so they are facing backwards, creating a simple and clean cable management path in your entertainment…
Wydruk około 6,04 €–7,39 € nettoWstępna wycena jednego wariantu
A BNC connector dust cap. Openscad source file included. The bayonet slot of this cap design has a cavity at the end to hold it better in place. I am marking it as 'customizable' even though the openscad code requires parameters cleanup…
This remix adds a clip for a Female BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio…
This remix adds a clip for a Male BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio operations,…
Manpack Rail System for RT95/AT-778UV – 3D Printable File Hey everyone, I’m excited to share my latest 3D design—the Manpack Rail System for the RT95/AT-778UV ! As a passionate Ham radio operator and off-roading enthusiast , I wanted a…
A cap for a BNC female connector. I've remixed it to add a retaining ring. Credit to ItzKCase for the original model, which can be found here: https://www.thingiverse.com/thing:5276197 Printed in TPU.
BNC locking dust cap for oscilloscope, radio, function generators, etc. Put the cap on the connector and turn right to lock. Turn left to unlock and remove. Infill: 20-60% Material: PET-G/PLA/ABS
UPDATE 01.04.2024: Added Antenna dapter for original K5 antenna and ABBREE folding antenna. I play around with my Quansheng way to much, including constantly changing antenna, doing measurements and so on, SMA connector is not meant to be…
A tool for installing SDI Video cables with BNC connectors in tight spaces like on the back side of video equipment. The tool fits the standard Amphenol BNC connector and has a slot for the cable to go. Printed in Polymaker PolyLite PLA…
This is a small brace to support the SMA to BNC adapter from Signalstuff. Adapter can be found here: https://signalstuff.com/product/smam-to-bnc-adapter/ This is designed for the (tr)uSDX by DL2MAN and PE1NNZ. It simply slips over the SMA…
I have a few pieces of test equipment in my lab that utilize the common BNC type connector. The problem is that the connectors, when unused, are commonly left unprotected. Enter 3D printing. This little cap slips on and then twists to…
A simple dipole center structure with a hole for a BNC panel mount connector and space for a T80 torroid 1:1 balun. For field use. Category: Electronics
Overview The Analog Discovery 2 from Digilent is a handy tool for simple electronic experimentation offering a full digital + analog lab in your pocket. Digilent offers a BNC Adapter Board for use with more traditional test probes but is…
I included the .scad-file so you can modify or add upgrades yourself if you like. It is drawn from scratch, but inspired by some other designs from the web. Use some M3 screws with about 6 to 12mm length to secure the whole assembly.…
[V2 Text] Did some updates to the design: Added a much grippier snap together tab. This took a couple of iterations to get right. Initially it was very tight, but now I think provides a pretty decent balance of security and open-ability.…
I designed for my ICOM 705 this bracket, for solid antenna holding. Used material was PETG.
Los pocos protectores para conectores BNC que he podido descargar presentaban problemas con las medidas, generalmente eran muy grandes y había que reescalarlos. Asi es que me he puesto manos a la obra y he diseñado unos protectores…
modifications: removed the part holding the Analog Discovery 2, so this case sits nicely in the box on its own. made the side with unprotected pins 3mm wider so they don't stick out and risk getting bent. modelled threads for M3x8 screws…
Print at 0.2 layer height. it should just screw on without much effort be careful not to force it.
This is a Complete set of Piece in order to build a Yagi-Uda antenna that is very lightweight and portable. complete with a pistol grip handle and separate piece for the BNC connector [not pictured]. there is even a cut-out for your…
Coaxial Cable Stripper - RG58 / BNC Tool for stripping RG58 coaxial cable for BNC-type crimp connector. For use with standard utility blade (Stanley, DeWalt etc) and two 30mm M3 screws and nuts. Print settings Fill density: 15% Fill…
This takes the design of the K6ARK winders (which in my opinion are the best antenna wires that exist) and turns it into an X shape for use with antennas with a female BNC connectors. I made them to support my line of End fed antennas…
It spreads the tension of big/heavy antennas (W100RX2 added since its a great antenna and i have it now) away from the SMA onto the case. I got inspired by https://www.reddit.com/r/hackrf/comments/1l9c72m/hackrf_h4m_antenna_mod/ .
Use your ZT-703S or ZT-DQ02 with backcover in the rugged case. OpenSCAD-file is included. Copy the originbal bottom inlay file in the OpenSCAD folder and rename to bottom.stl Enjoy!
Female BNC Connector, for use as a plug or as a way to store antennas or cables.
Can be twist-locked. Tri-wing design is made for easy grip on my fingers.
This BNC cap protects connectors from dust and damage, including an integrated loop for attaching a lanyard or cable tie, preventing loss when the cap is removed. Ideal for handheld radios, RF equipment, and test gear. There is a version…
This is a shroud that covers cover the exposed metal on BNC connectors to prevent shorting to anything on your bench. You can also print them in different colours to help identify your probes or cables. Different brands of connectors have…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection. Links BNC Jacks - https://www.amazon.com/dp/B08139D4XS?ref=fed_asin_title Related Models Icom IC-2350H Cage -…
Press this lever on the knurled part of a BNC connector. If the connectors are very tightly packed you can put the levers on backwards so the lever arms clear each other when operated.
This is a remix of the original AX1 antenna clamp bracket as well as a generic molle mount. I took only the l bracket from the clamp mount and put it into blender and paired it with the generic molle mount so now you can have a man pack…
This is essentially a Female BNC Connector that has an outer ring to protect the end of the connector from being crushed. The print on the picture has our company logo on it, but i've removed it from the model files.
EFHW antenna base. 4mm screw holes. 6mm support holes Fits this toroid: https://www.amazon.com/dp/B084LVGZ9Q Has optional ground connection hole and counterpoise hole. My personal design uses a counterpoise and I DO NOT connect it to…
This is a nanoVNA-H base that holds two BNC/SMA connectors firmly to save SMA life and relieve strain on the nanoVNA. The design is done in OpenSCAD, so it is completely parameteric. The stl files are for a Huygen nanoVNA-H which has a…
This fits my MLOK cage I designed for my radio. It will relocate a BNC coax connection and audio speaker cable. Links Audio Jacks - https://www.amazon.com/dp/B0C9MDDLNG?ref=fed_asin_title BNC Jacks -…
V01: for cylindric ellbow adapter (diameter 11mm) V02: for cubic ellbow adapter (dice 11x11x11mm )
Timesaver holes already sized for BNC panel mount connectors, both round and with the flat side. Save them to your virtual toolbox and you can just load them and use as holes. Saves the time of remembering or figuring out the dimensions…
My version of GBS Control case for GBS 8200 and two sizes of ESP8266 modules, plus RGBS BNC connectors. The two sizes of the ESP8266 module supported are: 48 x 25mm 58 x 31mm Please choose the corresponding one when you print. Project is…
This is a mounting plate for a dipole antenna. this design is sized for an FT114 toroid. it uses M4 screws and a BNC chassis mount connector. zip ties are used to hold the toroid in place. the BNC cutout is sized for a BNC bulkhead…
Neat holder to take care of your BNC cables in the electronics lab and keep everything nice and orderly. Can be printed on any single head 3D printer with fan-cooling. Does not require support material. Instructions Created it from…
This is the next revision of the K6ARK antenna winder for the female BNC connector version. Adam showed off his new design in a livestream and I used that to create this version. This was designed using the FreeCAD Link Stage Branch. I…
I screw a lot of BNC connectors at work. Usually I screwed them in with pliers, but that sometimes scratched the BNC. So I made this.
A small sleeve to protect and support the SMA to BNC adapter for the antenna on a Baofeng transciever. Tested on the Baofeng UV-S9PLUS might be compatible with other models. Printed with a 0.2mm nozzle in mind, might be possible with a…
Adam, K6ARK has designed an ultra-compact matching unit kit for portable Ham radio operation. One of his winder design ( https://www.thingiverse.com/thing:5385215 ) integrates a clip for a Male BNC connector. Seeing that, I designed an…
I needed to tighten BNC connectors so they wouldn't rotate when connecting a cable. This tool allows you to keep the female connector from rotating while you fasten the nut on the other side, and prevents any damage to the connector (vs…
I was installing a new antenna distributor in a mixing/audio rack and the stock location of the BNC bulkhead adapters would put the antennas in a far from ideal position. Mixing with your hands in-between two antennas would be terrible…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
A Exoskeleton for the Ailunce HD1 Radio so your PTT, side buttons, volume and channel dials don't get pushed or changed unintentionally when, for example, used in a pouch or a plate carrier. Screws into the back of the radio (with or…
Sister project of my GBS Control Case for 8220: https://www.thingiverse.com/thing:4666227 Compatible with two sizes of the ESP8266 WiFi modules: 48 x 25mm 58 x 31mm Please choose the corresponding socket when you print. Project is put…
[Simple Attenuator Box] with 5 stage, for BNC connectors very useful for Osciloscope, Fox Hunting, Audio Tweaking/Freaking, Ham Radio… i plan on using Dymo tape on the face to mark the attenuation values. Material: 2X BNC connector 5X set…
Holds two BNC/binding post connectors for attaching a device for testing with a VNA. Designed in OpenSCAD, so it is completely parametric. Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .2 mm Infill: gyroid Filament:…
I found some others online but each had it's own issues (too thin walled, no shoulder to hold connector well, etc). I made mine to correct for those in my use. I am posting them in case it helps anyone else. Print comes in 3 lengths so…
RF Coax Adapter Bins for the Gridfinity system consisting of PL259-, SO239- and BNC-base connectors for Amateur Radio. Each bin type can house 5 coax adapters.
Unless you have tiny fingers, connecting a BNC male plug in a tight group of BNC jacks is hard. You can't get your fingers there to grip and rotate the plug. And when trying to remove one, you can't press and turn when all the cables are…
This is a 1 wide by 2 slot antenna mount for a BNC Female Bulkhead radio antenna connection. This will allow you to move where the antenna is located on your person and keep it out of the way, such as mounting the radio antenna to your…
Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…
A small sleeve to protect and support the SMA to BNC adapter for the antenna on the Yaesu FT-70D transciever. Printed with a 0.2mm nozzle in mind, might be possible with a 0.4 mm nozzle as well, i have not tested it. You might want to add…
A spacer for BNC/SMA adapters to improve the look. Sized for use with a Nagoya NA-771, but will likely work with other antennas.
No Support…just print it :-) Two alternatives… use what you like.
Oscilloscope BNC Connector cover Protect Oscilloscope BNC connectors from rusting/environmental factors
You will need a piece of standard 3M VHB tape. This tape is typically about 1mm thick. Simply stick the tape to the bottom of the finished print, and cut out the hole. Then check that your included MCX-to-BNC connector fits snugly into…
I looked at several BNC dust caps on Printables. I wanted a cap that would click into position and not rattle off. I didn't find any (maybe I missed one). So I designed my own. After lots of trial and error, here it is. There are internal…
Allows to use BNC connectors with Retevis RT3S and protects SMA connector from wearing out (SMA connectors have limited number of connection cycles). Printed from PETG. No supports needed.
Just a Dust Cover Remixed for the Signal Generator to have a snug fit
I use my Yaesu FT-891 for portable operations. I designed this adapter to replace the cumbersome SO-239 with a high quality Amphenol BNC connector. Id recommend ASA, ABS, PET, or other high temp filaments. I used Amphenol part number…
Remix o cjnaz's "BNC connector dust cap that clicks into place and stays there". I just added a knurling for a better grip with https://bumpmesh.com , here were my settings: height=0.3 inverted scale=0.33
better pictures coming later. this is a simple box that has 3 BNC in the back and a single ON/ON double switch in the front. very useful for all kinds of application! from antenna testing to plugging multiple things onto your…
Tool for installing and removing BNC cables on high density panels. Changes from original: Reduced length from 130mm to 80mm Adjusted profile to fit around right-angled BNC plugs Print in PLA or PETG. Use a generous brim. Supports…
Der Halter erlaubt die Aufstellung von selbst gebauten Dipol Antennen (mit BNC Terminal Block) auf dem Fensterbrett. Zusätzlich wird folgendes benötigt: 1 x PVC Installationsrohr 25mm Zum Drucken eignen sich PLA, PETG und natürlich auch…
This model is a cutting guide to help you dress coaxial radio cable for a crimp-on BNC connector. It is for Amphenol part number 112533, which suits RG-8x and LMR-240 50 ohm cable. As shown in the attached picture, Amphenol specifies…
BNC-3M Banshee for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • bnc-3m4.stl The…
A little bracket to mount a BNC Bulkhead connector under the shelf of a workbench. Black PTEG. Mounting holes designed for Flathead #6x1 in Wood Screws.
It's easy to buy an adapter that's BNC (F) to 3.5 mm (M) but I've only found the other way in cable form, so I made my own. It could be used to adapt BNC jacks to accept 3.5 mm patch cables as used in modular synthesizers, or to connect a…
The sleeve is designed both guy the mast and attach antenna wires. The sleeve sticks to the DXWire mini GFK mast (10m) at around 5m, so the vertical λ/4 part of the antenna fits to the aligns part of the mast. The rim is used to attach…
Compact wire winder with male BNC clip. Added a few holes to Adam Kimmerly's “Wire antenna winder with male BNC clips.” model to attach paracord or the infamous S-biner to give options for carrying and attachment points. Shown with one of…
A small frame for a loop antenna made from RG8 coax. Based on this video's dimensions https://www.youtube.com/watch?v=Ivr9VbSgjUU , just with BNC connectors. The frame is to support it since RG8 is quite thin and flimsy. The loop is…
For use with low-weight QRP antennas only (MFJ-1899T, Elecraft AX1/AX2). Works well with PLA. To attach, unscrew half of clamp opposite of handle, slide onto metal bar. It will require some effort, but the snug fit helps keep the antenna…
Neutrik D series chassis feedthrough connector spacer. Application: -unscrew the rear metal nut - take out the coupler form the house - put on this small printed part on coupler - put back the coupler into the house, and tigthen the rear…
Quick print improving long product life which is ANENG AOS 02 oscilloscope. Not everytime oscilloscope function is used. Sometimes we are using only multimeter functionality on for example dusty field or contaminated environment. That's…
This is a fully functional (and roughly 1/4 scale) model of a BNCO Model 110, it is overall very simple to build and works and sounds great! HARDWARE PARTS: motor shaft coupler You also need wire, but you can use whatever you have for it…
The monitors for film/tv sometimes have BNC ports that are difficult to reach. I added some extra grip to the cap so it is easier to grab. Printed on Prusa Core One with .2mm layer height. No supports needed. *Edit 26/7/2026 *: Added a…
The Harris XG-100P has a recessed SMA Female antenna connector. Only Harris antennas specific to the XG-100P will fit elegantly. Using a widely available SMA Male to BNC Female connector, this spacer gives the support and stability needed…
A Rear Twist replacement when your BNC connectors are not Neutrik ones. Print using PETG. NOT MY DESIGN : repost from CameraTools3D on Makerworld.
A dial cage for the Ailunce HD1 Radio so your volume and channel dials don't get changed unintentionally when, for example, used in a pouch or a plate carrier. Comes in two flavors: SMA -> for use with the default antenna or other…
This mount goes along with this project: https://oshpark.com/shared_projects/GYx5pdjH https://github.com/skumlos/if-c01comg-clone The board is a reverse engineered Component/RGB board for JVC Panasonic and Ikagami broadcast monitors. All…
I love the MicroPA 100 but I hate the SO-239/UHF connectors, so this small print allows you to swap them out for standard BNC type connectors. The socket for the BNC is slightly off center on purpose so that it visually looks centered on…
Estes Mars Lander 2x Nose Cone Category: Models
Semi-enclosed case for the combination of Digilent Analog Discovery 3 and BNC Adapter board.
This is a 1x2x6 gridfinity bin that holds 3 BNC female connectors. All the matching holes are threaded with the specific BNC pitch. Threading means you will only be able to use this box for this connector only. The bin is tall enough to…
I wanted to use a camera tripod to mount an external antenna for Field Day use, but the 1/4-20 threads on tripods are too short to attach a standard nut. By using a 1/4-20 Coupling Nut I was able to 3D print these mounts, and the design…
Disclaimer: I have no affiliation with Adam Kimmerly (K6ARK). I just like his stuff, and his kits were out of stock, so I made this. You should check out his stuff if you haven't. For this transformer, you'll need: FT50-43 Ferrite Toroid…
Designed to help reduce the risk of electric shock when working with high-voltage circuits using an oscilloscope. It provides an isolated layer for your BNC connectors for safety during measurements.Also helps keep the BNC connectors dust…
A balun case with a BNC input and BNC output
Added cable relief, zip tie holes and suspension hole to the original design
BNC_50AD Nose cone (Used on the Fliskits Stingray)
A grip for the BNC adapter for Motorola radios so that its easier to fit and remove. Slips over the BNC test plug.
PETG recommended but PLA should be fine for smaller antennas. Very tight fit.
