Liczymy pasujące modele…
After the failure of the original connector, I designed a very similar one, but smooth inside, which prevents sawdust from getting stuck inside. Print as in stl. There is no need to use brims or supports.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Mounted with 6mm dowel and 4x50 screw. Printed with supports under bayonet.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Changelog: - Enlarging the back gap on the LW model, 1g less for a total of 31g - Adding a Light Weight version, 8g less for my settings - Initial release Easy print without any support vertically, but can also be printed laying down. I…
Changelog: 19.02.2023 → Adding a LW version, not tested yet
Bosh IXO adapter for Honeycomb Wall
List of models: AMBROGIO ALEX ZCS, L15, L15 DELUXE, L200, L250 DELUXE, L250I ELITE, L250I ELITE S+, L350I ELITE, L400I BASIC, L400I DELUXE, 4.0 BASIC, 4.0 ELITE, 4.36 ELITE, L60 ELITE, L60 ELITE S+, B6, L30,D3, L3, S3, L32 DELUXE, L35…
WALLMAOUNT FOR BOSH GAL 1230 CV HOLDER CHARGER
This is a remix of this design https://www.thingiverse.com/thing:4582540 . I modified the SCAD file to accommodate the Bosch Daredevil bits which are wider. Printed in 0.3mm layer height with no supports. Bit sizes for this print are: -…
This needs to be printed upright to make sure the screw positions are strong enough. I used 4 perimeters, added a sheath around the supports and a brim.
Print in ABS or some other high-temp resistant material. Also, the wheel joint-thing must be printed in the pictured orentation or the “clips” will break off.
Mine broke when i yanked the blade against the windshield in attempt to break off ice. Without that cap blade is falling apart, so i've made the replacement
This model is replacement base plate for Bosh GKF 12V-8 router (equivalent to ref 1 600 A00 N9C). It is designed to be as close as possible of the original base plate. Autodesk Fusion 360 file is provided if you want to make so…
I'm updating my model to be able to have a multiple holder for bosh 18V batteries. I need to print it and test it before full release.
Simple 1 piece screwdriver for kid toys screws like Bosh Klein, Eichhorn Constructors, and others. Modeled in Blender, exported as STL 29,64x29,94mm handle ( diameter) 94,60mm high EDIT: added pre-supported version for resin print…
Hello This time for my tools collection i added Router table with guard and adjustable angle sled, it comes with different size ring covers for different bit sizes. print with support required due to complex design
Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
This plastic knives for the Bosch trimmer are getting difficult to find, so I decided to draw one and print them. I print them in TPU, PETG or PLA breaks easily.
Support de batterie Bosh Powertube avec indicateur de charge Bosh Powertube charging dock with charging light
Spare wheel and fixation of a Bosh dishwasher. Print Settings Printer: Anet A8 Rafts: Yes Supports: Yes Resolution: 0,2mm Infill: 100% Filament: Fil-a-Gehr ABS White Notes: Print with ABS or higher temperature filaments to resist the…
Bosch case lock clip. Hinge is made from paper clip. Glue with epoxy. See photos for details.
This is an inlay for Bosh Professional 1mm to 13mm Drill Bit PointTeQ Set. It accepts Quick Setup Drill Depth Guide by Highrise Workshop.
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
Bosch trimmer line cassette. From 2 parts. Printed from PETG plastic.
This Adapter connects the Boch PSM 160 A to the Kärcher A2204. Other models might work too. If you use it for a different model, please leave a comment on which ones are compatible with the adapter. Sander side: "Bosh microfilter system”…
Allows use of the Rigid 5 gallon wet/dry vac with the Bosh corded variable speed sander. Just a press fit but did a good job staying on while working on refinishing a table. Prints easily, no supports. I used around 30% infill to give the…
Nozzle for Bosh hand vacuum cleaner
You may use the OpenSCAD script shared on GitHub to generate a model with your own customization and printer settings. I would recommend to use your minimal printer tolerance setting and then file down the inside of the 3D printed barrel…
Bosh vacuum cleaner nozzle adapter to 36mm nozzle
This support is designed for my tool and my pegboard but is easy to adapt
Material: PLA Wall line count: 3 Topp layers: 3 Bottom layers: 3 Infill: 15 % It can be printed with support, as on image, recommended for strongest part. To print without support please rotate the model, but be a little careful when…
mount to attach bosh 35Ø hose to a Hitatchi SV13YB Sander
Adaptación del modelo original para sujetar e Bosh Gluey en el panel HoneyComb
i print it at 10 perimeters in petg, not tested Yet, Test it before use, at your own risk. Nylon CF is the best solution.
Bake cookies and feel Aizu(Japan). The types are "Akabeko", "Okiagari Koboshi", "Tojin Kite", and "Horse Sashimi". There is a legend in Akabeko to get rid of the plague. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No…
Pasta disk for meet grinder BOSH MFW3640
Chock Key M12 for Bosh Toy Screwdriver Klein
Dust connection for a 100mm hose in stead of the tiny 35mm thing that comes withj the saw Category: Parts
Couldn't find replacement so I made one. Used TPU for the top ball for easy insert. Surprisingly it fits GREAT. Even I'm surprised with my genius :D Fusion File also provided, for tweaks.
This is an adapter you can screw on the Ruhhy vacuum bag and clip the Bosh stick vacuum (the handheld part) to it to suck the air out of the bag. I printed with PLA and it works fine, but you need to be extra careful when removing…
This one is made to fit focus power tube 625. this battery has extra (0.5mm) bumpers on the sides of the battery so this adapter will also fit versions that does not have these features. enjoy. there are some out there already but these…
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
Držák pro laserovou vodováhu Bosh na děrovanou stěnu Mars. Doporučuji tisknout s podpěrami pro zadní háčky.
Did one for my mates TREK to replace the hinged cover so that they could use a powermore without kicking off the plastic cover. It was such a good idea I did one for my cube, Ive been holding the original flappy hinge one on with elastic.…
Replacement safety actuator/extender for Bosh MCM3401M food processor. i printed in PETG 0.6N 0.2L, with 3 perimeters and more infill. requires supports. may require some filing off/cutting off. possible improvements: better lofts to…
Designed for my pegboard but easy to adapt
Adapter ring with cutout in case you purchased the kent dust boot for a bosch router. the original dust boot is 90mm in diameter and the spindle from cncrouterparts/avid cnc is 80mm. I did not want to have to buy a new one or create one…
Adapter that allows you to use Bosch Unlimited stick vacuum cleaner nozzles on your Eloctrolux vacuum cleaner
Adapter for 6.5mm to 5mm hexa Bits for BOSH IXO Print Settings Printer Brand: FlashForge Printer: Guider II Rafts: Yes Supports: Yes Resolution: 04 Infill: 50 Filament: XINGTONGZHILIAN PETG+ grey Category: DIY
I made and then printed this replacement out of PETG with gyroid infill, 4 walls thick and it's holding up strong so far. My specific model is WTH85200BY but I know this specific pulley should fit different models as well.
Wheel Speed Mount for a Bosh HAP-2 Wheel speed sensor, to mount on a small race car
i did it for the feestool DTS 400 REQ but it did fit the BOSH PSM 100 A support free strong enough to hold the machine weight
The original grinder shields were broken, so I made a replacement. I tried printing new shields in transparent PETG, but I couldn't get them clear enough, so I bought a clear acrylic plate 4mm and printed frames in black ABS instead. I…
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): White Switch to the next filament at layer #12 (1.04mm): Sky…
1:1 3d scan of bosh heatgun with table holder for more stability and safety.
BOSH profile stand on your desk
This is STL have to cut and print the basket to fit the printer plate, Use then the join parts to stabilize after placed into dishwasher. Need 60stick. Suggested to print in ASA 80% infill.
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
Adapter that allows you to use Bosch Unlimited stick vacuum cleaner nozzles on your Eloctrolux vacuum cleaner
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): White Switch to the next filament at layer #12 (1.04mm): Sky…
A minimalist and clean wall mount holder for Bosch eBike chargers. Keep your garage or workshop organized with this custom-designed wall holder. It features a central cutout that keeps the original Bosch logo visible while securely…
You may use the OpenSCAD script shared on GitHub to generate a model with your own customization and printer settings. I would recommend to use your minimal printer tolerance setting and then file down the inside of the 3D printed barrel…
Printed in PETG. Wiper mount needs supports. Detach wiper → put on wiper mount → attach wiper to the arm → slide the cover in
![Bosh Daredevil Standard Spade Bit Holder/Rack/Storage [remix]](https://media.printables.com/media/prints/64459/images/671906_f394a1f0-88ec-49b4-ac5c-022447dab972/2021-04-22-072946.jpg)
